Integral localized approximation description of ordinary Bessel beams and application to optical trapping forces.

Biomed Opt Express

School of Electrical and Computer Engineering (FEEC), Department of Microwaves and Optics (DMO), University of Campinas (Unicamp), 13083-970 Campinas-SP, Brazil.

Published: July 2011


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Ordinary Bessel beams are described in terms of the generalized Lorenz-Mie theory (GLMT) by adopting, for what is to our knowledge the first time in the literature, the integral localized approximation for computing their beam shape coefficients (BSCs) in the expansion of the electromagnetic fields. Numerical results reveal that the beam shape coefficients calculated in this way can adequately describe a zero-order Bessel beam with insignificant difference when compared to other relative time-consuming methods involving numerical integration over the spherical coordinates of the GLMT coordinate system, or quadratures. We show that this fast and efficient new numerical description of zero-order Bessel beams can be used with advantage, for example, in the analysis of optical forces in optical trapping systems for arbitrary optical regimes.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3130576PMC
http://dx.doi.org/10.1364/BOE.2.001893DOI Listing

Publication Analysis

Top Keywords

bessel beams
12
integral localized
8
localized approximation
8
ordinary bessel
8
optical trapping
8
beam shape
8
shape coefficients
8
zero-order bessel
8
approximation description
4
description ordinary
4

Similar Publications

In this study, silicon nanoparticles (NPs) were produced by pulsed laser ablation in a liquid, aiming to investigate the influence of a laser beam profile on the properties of the resultant NPs. Morphology, inner structure, and phase composition of the formed NPs were characterized by means of ultraviolet-visible spectroscopy, high-resolution transmission electron microscopy, and Raman and photoluminescence spectroscopies, and the correlation of the NP properties with the laser beam profile was studied. Three different beam profiles were selected, namely, a Bessel beam produced using an axicon, an annular profile formed using a combination of an axicon and a converging lens, and a Gaussian beam focused on the surface of a Si target using the same converging lens.

View Article and Find Full Text PDF

We describe a simple and effective method for the experimental generation of a variety of vector beams, including vector Laguerre-Gauss (vLG) and vector Bessel-Gauss (vBG), and experimentally realize vector Mathieu-Gauss (vMG) beams for the first time, to the best of our knowledge. We require only a single binary hologram on a Digital Micromirror Device (DMD) and use two orthogonally polarized beams with complex conjugate amplitudes to obtain independent control over both the phase and polarization structure of the generated fields. We characterize the beams using intensity measurements and Stokes polarimetry, and quantify their vector quality through concurrence.

View Article and Find Full Text PDF

Producing Bessel Beams with an RF Transformer.

IEEE Trans Ultrason Ferroelectr Freq Control

August 2025

Bessel beams are exact solutions to the isotropic/homogeneous wave equation. In theory, they can propagate to infinite distance without diffraction. In practice, when produced with a finite aperture, they have a very large depth of field, i.

View Article and Find Full Text PDF

Adaptive optics scanning light ophthalmoscopes are instrumental for studying the eye, yet they use truncated Gaussian illumination and are limited by diffraction, restricting resolution and depth of focus (DOF). Non-diffractive Bessel beams have emerged as an alternative. Here, we use two axicons configured as: (1) an extended DOF beam for resolving multiple retinal layers; and (2) an annular beam for increasing lateral resolution.

View Article and Find Full Text PDF

The manipulation of spoof surface waves (SSWs) plays a very critical role in terahertz photonics and imaging due to their unique properties. However, the dynamic manipulation of SSW wavefronts remains a major challenge, restricting their wide-ranging applications. Here, we propose an approach to design reconfigurable on-chip metadevices that enable terahertz SSW excitation, wavefront reshaping, and dynamic manipulation in a controllable manner simultaneously.

View Article and Find Full Text PDF