Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

A transition edge sensor (TES) microcalorimeter has been developed for use as an energy dispersive X-ray spectrometer. The TES microcalorimeter is a thermal detector that enables one to determine the energy of an incident photon by measuring the resultant increase in temperature. In this work, a Ti/Au TES microcalorimeter was developed to measure LX rays emitted by transuranium elements. The phase transition temperature was set at ~200 mK by using a bilayer structure composed of a 110-nm-thick Au layer and a 40-nm-thick Ti layer. An Au of 5 µm thickness was deposited on the Ti/Au bilayer to achieve an absorption efficiency of 35-80 % for the energy range of LX rays (10-25 keV). The developed TES microcalorimeter was irradiated with LX rays emitted by an (241)Am source at an operating temperature of 140 mK. An energy resolution of ~80 eV (full width at the half maximum) was obtained for L(β1)X ray of 17.75 keV.

Download full-text PDF

Source
http://dx.doi.org/10.1093/rpd/ncr118DOI Listing

Publication Analysis

Top Keywords

tes microcalorimeter
16
rays emitted
12
transition edge
8
edge sensor
8
emitted transuranium
8
transuranium elements
8
microcalorimeter developed
8
development microcalorimeter
4
microcalorimeter transition
4
sensor detection
4

Similar Publications

The superconducting properties of 85 nm thick hafnium thin films with a 5 nm thick titanium layer on top have been investigated for three different geometries, that is, a film covering the entire 7 × 7 mm chip surface, bridges with a width of 200 μm and length up to 1800 μm, and bridges in the form of squares with sides from 100 to 1000 μm. The bridges were formed by a photolithographic lift-off process and are intended to be used as the main sensing element of a microcalorimeter based on a transition-edge sensor (TES) in experiments to determine the magnetic moment of neutrinos. Based on the measurements of the critical current, the critical temperature, and the width of the superconducting transition, we estimate the energy resolution δ of the TES prototypes, showing that it is possible to fabricate microcalorimeters with δ less than 1 eV using these films.

View Article and Find Full Text PDF

Transition-edge sensor (TES) microcalorimeters are advanced cryogenic detectors that use a superconducting film for particle or photon detection. We are establishing a new production line for TES detectors to serve as cryogenic anticoincidence (i.e.

View Article and Find Full Text PDF

X-ray nanotomography is a powerful tool for the characterization of nanoscale materials and structures, but it is difficult to implement due to the competing requirements of X-ray flux and spot size. Due to this constraint, state-of-the-art nanotomography is predominantly performed at large synchrotron facilities. We present a laboratory-scale nanotomography instrument that achieves nanoscale spatial resolution while addressing the limitations of conventional tomography tools.

View Article and Find Full Text PDF

Hafnium is a superconductor with a transition temperature slightly above 100 mK. This makes it attractive for such applications as microcalorimeters with high energy resolution. We report the superconducting properties of Hf films of thicknesses ranging from 60 to 115 nm, deposited on Si and AlO substrates by electron beam evaporation.

View Article and Find Full Text PDF

We report on the x-ray background rate measured with transition-edge sensors (TES) micro-calorimeters under frequency-domain multiplexing (FDM) readout as a possible technology for future experiments aiming at a direct detection of axion-like particles. Future axion helioscopes will make use of large magnets to convert axions into photons in the keV range and x-ray detectors to observe them. To achieve this, a detector array with high spectral performance and extremely low background is necessary.

View Article and Find Full Text PDF