Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
The effect of polymer infiltration on the compressive strength of β-tricalcium phosphate (TCP) scaffolds fabricated by robocasting (direct write assembly) is analyzed in this work. Porous structures consisting of a tetragonal three-dimensional mesh of interpenetrating rods were fabricated from concentrated TCP inks with suitable viscoelastic properties. Biodegradable polymers (polylactic acid (PLA) and poly(ε-caprolactone) (PCL)) were infiltrated into selected scaffolds by immersion of the structure in a polymer melt. Infiltration increased the uniaxial compressive strength of these model scaffolds by a factor of three (PCL) or six (PLA). It also considerably improved the mechanical integrity of the structures after initial cracking, with the infiltrated structure retaining a significant load-bearing capacity after fracture of the ceramic rods. The strength improvement in the infiltrated scaffolds was attributed to two different contributions: the sealing of precursor flaws in the ceramic rod surfaces and the partial transfer of stress to the polymer, as confirmed by finite element analysis. The implications of these results for the mechanical optimization of scaffolds for bone tissue engineering applications are discussed.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.actbio.2010.05.024 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Experimental study on salmon demineralized bone matrix loaded with recombinant human bone morphogenetic protein-2: and study.
Open Life Sci
August 2025
Stomatology Ward, The Affiliated Yantai Yuhuangding Hospital of Qingdao University, 20 Yuhuangding East Road, Yantai, 264000, China.
This article aims to explore the effects of salmon demineralized bone matrix (DBM) combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) on bone formation. Salmon DBM, with its high water absorption capacity, was used to construct a composite material with rhBMP-2 under pH 7.0 and optimal temperature conditions.
View Article and Find Full Text PDFPhosphogypsum and Carbide Slag Synergy for Red Mud Soil Stabilization: Mechanical Performance, Environmental Impacts, and Micro-scale Mechanisms.
Environ Res
September 2025
China Construction Fourth Engineering Bureau Fifth Construction Engineering Co., Ltd. Nanxin Road, Nanshan District, Shenzhen, 518000, China. Electronic address:
The production of phosphogypsum (PG), calcium carbide slag (CS), and red mud (RM) in global industrial development imposes serious environmental issues. Utilizing CS and PG as curing agents and incorporating RM as a soil substitute can facilitate the solid waste resource utilization. However, few studies have investigated the synergistic effects of PG and CS on the stabilization of RM and soil.
View Article and Find Full Text PDFPreparation of iron-rich belite-sulfoaluminate cement utilizing iron tailings and fluorogypsum.
Environ Res
September 2025
Key Laboratory of Green Utilization of Critical Non-metallic Mineral Resources, Ministry of Education, Wuhan University of Technology, Wuhan, Hubei 430070, China; School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, Hubei 430070, China. Electronic address: yubiao
In order to promote the development and application of low-carbon cement varieties and the recycling of industrial solid waste, this study used iron tailings and fluorogypsum to prepare iron-rich belite-sulfoaluminate cement (I-BCSA). The suitable conditions for the preparation of I-BCSA in this system were with an excessive addition of 6 wt% of SO in the raw meal, at a calcination temperature of 1250 °C for 1.5 h, and an added-gypsum content of 15 wt%.
View Article and Find Full Text PDFBioactive hydroxyapatite-sodium silicate waterglass reinforced with nanocollagen from Chitala ornata fish skin for bone engineering.
Int J Biol Macromol
September 2025
The Materials Engineering Department, Faculty of Engineering, Kasetsart University, Phaholyothin Rd., Bangkok 10900, Thailand. Electronic address:
A prototype bioactive calcium phosphate model-specifically hydroxyapatite (HA) derived from eggshells-was developed using a sodium silicate (NaSiO) solution as an inorganic binder, precursor, and reinforcing agent, in combination with collagen nanofibers for bone engineering applications. The sodium silicate solution, functioning as a waterglass adhesive, introduced cohesive forces within the hydroxyapatite matrix, thereby enhancing its physical, chemical, and mechanical properties. Eggshell-derived bioactive hydroxyapatite offers several advantages, including non-toxicity, biocompatibility, collagen adhesion, and the ability to mimic bone structure, making it suitable for tissue engineering.
View Article and Find Full Text PDFMesoporous Heat-Trapping and Smoke-Adsorbing Fe-MOFs Improve Fire Safety and Compression Resistance of Rigid Polyurethane Foam.
Langmuir
September 2025
School of Resources Engineering, Xi'an University of Architecture & Technology, Xi'an, Shaanxi 710055, China.
The use of highly flammable materials such as foams, resins, and plastics has led to an increase in the frequency and severity of urban fires worldwide. To address this issue, this study developed a high-specific-surface-area mesoporous metal-organic framework (Fe-MOFs) with heat trapping and smoke adsorption. The Fe-MOFs, zinc tailings (ZTs), piperazine pyrophosphate (PAPP), and sodium lignosulfonate (LS) were used to modify rigid polyurethane foam (RPUF).
View Article and Find Full Text PDF