Characteristics of Occlusal Force and Masticatory Performance in Female Patients Who Selected Implant Treatment for a Missing Mandibular Second Molar: A Retrospective Study.

Background: In this study, we aimed to investigate the association between a patient's selection of implant treatment for a missing mandibular second molar and the magnitude of occlusal force, masticatory ability, mandibular morphology, and age before treatment intervention.

Materials And Methods: We retrospectively assessed occlusal force, masticatory performance, and mandibular morphology in female patients who either selected or declined implant treatment for a missing unilateral mandibular second molar.

Results: Thirty-three women (mean age of 56.

Changes in Maxillary Sinus Structure Due to Tooth Loss and the Effects of Sex and Aging on CBCT Before Maxillary Sinus Augmentation: A Cross-Sectional Study of 120 Patients.

Prosthesis for missing maxillary molars with dental implants often requires maxillary sinus augmentation owing to insufficient alveolar bone height. However, the anatomical structure of the maxillary sinus is a significant risk factor. This study used preoperative cone-beam computed tomography (CBCT) to investigate changes in the anatomical structure of the maxillary sinus due to tooth loss and conducted an epidemiological survey of Japanese people to determine the effects of gender and age on these changes.

Longitudinal Observation of Micromotion upon Loading of Implant-Abutment Connection.

While technological advances have made implants a good treatment option with a good long-term prognosis, peri-implantitis, which results in alveolar bone resorption around implants, has been observed in some cases. Micromotion at the implant abutment connection can cause peri-implantitis. However, the temporal progression of micromotion upon loading remains unclear.

A Study of the Associated Risk Factors for Early Failure and the Effect of Photofunctionalisation in Full-Arch Immediate Loading Treatment Based on the All-on-Four Concept.

Early implant failure occurring within 1 year after implantation has been attributed to various factors. Particularly, early failure can lead to challenges in maintaining a full-arch prosthetic device, necessitating prompt intervention, including reoperation. This study aimed to retrospectively examine implant- and patient-related factors and the effects of photofunctionalisation associated with early failure in patients who underwent treatment using the all-on-four concept in both the maxilla and mandible.

Bacterial Flora in Screw-Fixed Superstructures with Different Sealing Materials: A Comparative Clinical Trial.

A screw-fixed superstructure is predominantly selected for implant prostheses because of the concern regarding developing peri-implantitis, although its infection route remains unclear. Focusing on microleakage from access holes, the present study clinically investigated the bacterial flora in access holes with different sealing materials. We examined 38 sites in 19 patients with two adjacent screw-fixed superstructures.

Risk Factors for Early Implant Failure and Selection of Bone Grafting Materials for Various Bone Augmentation Procedures: A Narrative Review.

Implant therapy is now an established treatment with high long-term success and survival rates. However, early implant failure, which occurs within one year of superstructure placement, occurs at a higher rate than late failure, which is represented by peri-implantitis caused by bacterial infection. Furthermore, various risk factors for early failure have been reported, including patient-related factors, such as systemic diseases, smoking, and bone quality and quantity, as well as surgery-related factors, such as surgeons' skill, osteogenesis technique, and selection of graft material, and implant-related factors, such as initial implant fixation and implant length diameter.

A Comprehensive Clinical Review of Maxillary Sinus Floor Elevation in Patients with Well-Defined Faintly Radiopaque Lesions in the Antrum.

Well-defined, faintly radiopaque lesions are occasionally observed in the antrum of the maxillary sinus in asymptomatic patients during maxillary sinus floor elevation. These lesions are treated as antral pseudocysts (AP) based on the clinical diagnosis in some cases, and maxillary sinus floor elevation is performed without enucleating these lesions. However, further surgery is required after implant placement if the lesion is a mucocele, odontogenic cyst, or tumour.

The All-on-four concept for fixed full-arch rehabilitation of the edentulous maxilla and mandible: a longitudinal study in Japanese patients with 3-17-year follow-up and analysis of risk factors for survival rate.

Purpose: Implant-supported immediately loaded fixed full-arch rehabilitation via All-on-four treatment yields good long-term results for both the maxilla and the mandible. However, the risk factors affecting long-term implant survival are unknown, and the long-term prognosis of All-on-four concept procedures in Japanese individuals has not been elucidated. We aimed to determine the cumulative implant survival rate after 3-17-year follow-up and identify the associated risk factors.

The Effectiveness and Practicality of a Novel Barrier Membrane for the Open Window in Maxillary Sinus Augmentation with a Lateral Approach, with Risk Indicators for Bone Graft Displacement and Bone Height Decrease: A Prospective Study in Humans.

Maxillary sinus augmentation with a lateral approach (MSA) is a well-established treatment. In this prospective study, we evaluated risk factors for postoperative bone graft displacement and reported the clinical application of long-term resorbable L-lactic acid/-caprolactone (PLA/PCL) as a barrier membrane to cover the open window in the lateral wall in MSA. Twenty-four patients underwent MSA according to the relevant criteria; CT data obtained before and 1 week (1 w) and 5-6 months (5 m) post-MSA, bone height changes, bone height reduction rates at 1 w and 5 m post-MSA, bone graft displacement measurements, and risk factors were examined.

Effects of implant surface mechanical instrumentation methods on peri-implantitis: An study using a circumferential bone defect model.

Background/purpose: Although several mechanical and chemical debridement techniques have been reported for the management of peri-implantitis, there is no consensus on the most effective method at present. This study aimed to examine the effects of different mechanical instrumentation techniques on the debridement of hard calcified materials, which are present on the implant surface, as well as the effect of the defect morphology.

Materials And Methods: From a total of 15 implants, five each were assigned to one of three decontamination groups (Rotary titanium brush [Ti], tricalcium phosphate air powder abrasive treatment [Air], and titanium ultrasonic scaler [US] groups); the exposed hydroxyapatite (HA)-coated portion was divided into three 1-mm sections (coronal, middle, and apical).

Effects of missing teeth and nasal septal deviation on maxillary sinus volume: a pilot study.

Purpose: Tooth extraction and the projection of the tooth roots into the maxillary sinus are reported to greatly reduce the bone height from the alveolar ridge to the maxillary sinus floor, while missing teeth are reported to lead to the expansion of the maxillary sinus, all of which are important considerations during dental implant treatment for the maxillary molar region. Therefore, assessing the anatomical characteristics of the maxillary sinus acting as complicating factors is crucial before sinus augmentation. We conducted a three-dimensional examination of the effects of missing teeth and nasal septal deviation (NSD) on maxillary sinus volume (MSV).

Variations in vertical mucosal thickness at edentulous ridge according to site and gender measured by cone-beam computed tomography.

Background: The vertical thickness of the peri-implant mucosa is associated with the amount of post treatment marginal bone loss. However, the variations in mucosal thickness at the different edentulous sites have been sparsely documented. The purpose of the study was to conduct a survey of the frequency distribution of variations in mucosal thickness at the different sites of the edentulous alveolar ridge and to compare them according to gender.

Factors influencing the sinus membrane thickness in edentulous regions: a cone-beam computed tomography study.

Background: During implant treatment in the maxillary molar area, maxillary sinus floor augmentation is often performed to ameliorate the reduced alveolar bone height attributable to bone remodeling and pneumatization-induced expansion of the maxillary sinus. However, this augmentation may cause complications such as misplaced implants, artery damage, and maxillary sinus mucosal perforation; infections like maxillary sinusitis; and postsurgical complications such as bone graft leakage and postoperative nasal hemorrhaging. To reduce the complications during maxillary sinus floor augmentation and postoperative infections, we performed retrospective investigations of various systemic and local factors that influence pre-operative sinus mucosal thickness (SMT) by using cone-beam computed tomography (CBCT).

Effects of implant thread design on primary stability-a comparison between single- and double-threaded implants in an artificial bone model.

Background: Primary implant stability is essential for osseointegration. To increase stability without changing the implant size, the thread length must be extended by reducing pitch, using a double-threaded implant, or reducing pitch/lead and lead angle to half that of a single-threaded implant.

Materials And Methods: We tested the stabilities of these configurations using artificial bone.

Evaluation of maxillary sinus floor augmentation with the crestal approach and beta-tricalcium phosphate: a cone-beam computed tomography 3- to 9-year follow-up.

Background: We performed maxillary sinus floor augmentation using the crestal approach and beta-tricalcium phosphate (β-TCP) and a long-term evaluation using cone-beam computed tomography (CBCT).

Methods: Twenty-three patients (30 implants) underwent sinus floor augmentation using the osteotome technique. Subjects underwent CBCT imaging before surgery, immediately after surgery, and at follow-up (≥ 3 years after surgery).

Effects of N-methyl-d-aspartate receptor antagonist MK-801 (dizocilpine) on bone homeostasis in mice.

Objectives: To gain insight into the role of the N-methyl-d-aspartate (NMDA) receptor in bone metabolism by examining the effects of its noncompetitive antagonist, MK-801 (dizocilpine), on bone homeostasis and bone healing in mice.

Methods: MK-801 (2.5 mg/kg) or saline (in control groups) was intravenously administered to healthy mice and mice with bone-defects daily for seven to 14 days.

Influence of Bisphosphonates on Implant Failure Rates and Characteristics of Postmenopausal Woman Mandibular Jawbone.

Rehabilitation of oral function using dental implants is clinically effective and highly predictable. Both bone quantity and quality at the implant site affect the success of the procedure. However, the effect of bisphosphonate (BP) use on mandibular bone quality has not been well documented.

Long-term radiographic assessment of maxillary sinus floor augmentation using beta-tricalcium phosphate: analysis by cone-beam computed tomography.

Background: The long-term stability of maxillary sinus floor augmentation with β-TCP remains largely unknown. We report the long-term assessment of volumetric changes in maxillary sinus floor augmentation with β-TCP by cone-beam computed tomography (CBCT).

Methods: The subjects included 30 patients who underwent maxillary sinus floor augmentation using β-TCP and 58 implant placement for unilateral maxillary defect, simultaneously.

Effect of implant design on primary stability using torque-time curves in artificial bone.

Background: Primary stability following implant placement is essential for osseointegration and is affected by both implant design and bone density. The aim of this study was to compare the relationships between torque-time curves and implant designs in a poor bone quality model.

Methods: Nine implant designs, with five implants in each category, were compared.

[Relationship between Occlusal Discomfort Syndrome and Occlusal Threshold].

Occlusal dysesthesia has been defined as persistent uncomfortable feelings of intercuspal position continuing for more than 6 months without evidence of physical occlusal discrepancy. The problem often occurs after occlusal intervention by dental care. Although various dental treatments (e.

Diagnosis of occlusal dysesthesia utilizing prefrontal hemodynamic activity with slight occlusal interference.

Clinical diagnosis of occlusal dysesthesia (OD), also referred to as phantom bite syndrome, is currently based on the absence of objective occlusal discrepancy despite the persistent complaint of uncomfortable bite sensation. We previously demonstrated that the subjective feeling of occlusal discomfort generated by artificial occlusal interference can be objectively evaluated using prefrontal hemodynamic activity in young healthy individuals. The aim of this study was to investigate whether dental patients with and without OD show distinct prefrontal activity during grinding behavior with an occlusal interference.

A diversity of peri-implant mucosal thickness by site.

Objectives: The objective of this study was to examine peri-implant mucosal thickness at different sites of peri-implant crevice around 70 implants placed in 35 patients.

Material And Methods: The peri-implant mucosal thickness was defined as distance of the peri-implant mucosal margin and the coronal edge of bone/implant contact and measured using the cast models and dental radiography.

Results: The overall mean peri-implant mucosal thickness was 3.

The Maxillary Sinus Floor Elevation Using a Poly-L-Lactic Acid Device to Create Space Without Bone Graft: Case Series Study of Five Patients.

Maxillary sinus floor elevation using autologous or alloplastic bone grafting is often performed for implant treatment of maxillary molars; however, issues related to the donor site and complications such as infection have been reported. We performed maxillary sinus floor elevation using poly-L-lactic acid (PLLA) as a space-making material in patients with an insufficient bone mass (<3 mm) for simultaneous implantation between the alveolar crest and floor of the maxillary sinus and evaluated the newly formed bone. Conventional antrostomy of the maxillary sinus from the lateral wall was performed, and PLLA was placed on the floor of the maxillary sinus after elevating the sinus membrane.

Rehabilitation of a Bilateral Maxillectomy Patient with a Free Fibula Osteocutaneous Flap and with an Implant-Retained Obturator: A Clinical Report.

A 47-year-old man underwent surgical resection and reconstruction with a fibula osteocutaneous flap. After the surgery, a surgical obturator was placed and adjusted. After flap healing, a conventional obturator was fabricated with polymethyl methacrylate resin and retained by the anatomical undercuts around the reconstructed fibula bone flap and the posterior part of the defect.