Correction: Staszczak et al. Nucleation, Development and Healing of Micro-Cracks in Shape Memory Polyurethane Subjected to Subsequent Tension Cycles. 2024, , 1930.

In the original publication [...

(Bio)degradable Biochar Composites of PLA/P(3HB--4HB) Commercial Blend for Sustainable Future-Study on Degradation and Electrostatic Properties.

Interesting alternatives to expensive biodegradable polymers are their composites with natural fillers. The addition of biochar to a blend of poly(lactic acid) (PLA) and poly(3-hydroxybutyrate--4-hydroxybutyrate) was studied, and the resulting materials were evaluated for their properties and changes during degradation. Introducing biochar as a filler brought a noticeable improvement in electrostatic properties.

Nucleation, Development and Healing of Micro-Cracks in Shape Memory Polyurethane Subjected to Subsequent Tension Cycles.

Thermoresponsive shape memory polymers (SMPs) have garnered increasing interest for their exceptional ability to retain a temporary shape and recover the original configuration through temperature changes, making them promising in various applications. The SMP shape change and recovery that happen due to a combination of mechanical loading and appropriate temperatures are related to its particular microstructure. The deformation process leads to the formation and growth of micro-cracks in the SMP structure, whereas the subsequent heating over its glass transition temperature leads to the recovery of its original shape and properties.

Evidence through Thermal Analysis of Retro Diels-Alder Reaction in Model Networks Based on Anthracene Modified Polyester Resins.

The present work is focused on polyester resins obtained from the diglycidyl ether of bisphenol A and anthracene modified 5-maleimidoisophthalic acid. Because the maleimide-anthracene Diels-Alder (DA) adduct is stable at high temperatures, it is considered a good option for high performance polymers. However, the information related to the retroDA reaction for this type of adduct is sometimes incoherent.

Thermal and Viscoelastic Responses of Selected Lignocellulosic Wastes: Similarities and Differences.

Woody lignocellulosic biomasses comprise the non-edible parts of fruit trees. In recent years, the exploitation of this biomass has been widening in order to mitigate environmental issues. At the same time, this waste could be transformed into a value-added product (active carbon by pyrolysis, isolation of nanocellulose, oils or proteins).

Evaluation of the Sublimation Process of Some Purine Derivatives: Sublimation Rate, Activation Energy, Mass Transfer Coefficients and Phenomenological Models.

Caffeine and theophylline are compounds with important applications in the pharmaceutical industry and other fields of the chemical industry. These purine derivatives have simple chemical structures, therefore, the evaluation of their sublimation process contributes to the development of mass transfer analysis methods that can later be applied to other compounds with more complex structures. With the help of thermogravimetric analysis in isothermal conditions, the kinetic study of the sublimation of caffeine and theophylline, along with the evaluation of kinetic parameters (activation energy and the pre-exponential factor), was carried out.

The Influence of the Hydroxyl Type on Crosslinking Process in Cyclodextrin Based Polyurethane Networks.

The influence of the hydroxyl groups (OH) type on the polyaddition processes of isocyanates represents a critical approach for the design of multicomponent polyurethane systems. Herein, to prove the effect of hydroxyl nature on both the isocyanate-OH polyaddition reactions and the structure/properties of the resulting networks, two structurally different cyclodextrins in terms of the primary and secondary groups' ratio were analyzed, namely native β-cyclodextrin (CD) and its derivative esterified to the primary hydroxyl groups with oligolactide chains (CDLA). Thus, polyurethane hydrogels were prepared via the polyaddition of CD or CDLA to isophorone diisocyanate polyethylene glycol-based prepolymers (PEG-(NCO)).

Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful?

Interest in renewable polymers increased exponentially in the last decade and in this context poly(lactic acid) (PLA) became the leader mainly for practical reasons. Nevertheless, it is outstanding also from a scientific point of view, because its thermal and morphological properties are offering challenging new insights. With regard to dynamic mechanical analysis (DMA), PLA does not have the classical behavior of a thermoplastic polymer.

Imino-chitosan biopolymeric films. Obtaining, self-assembling, surface and antimicrobial properties.

The paper reports the preparation of twelve imino-chitosan biopolymer films by acid condensation of the amino groups of chitosan with various aldehydes, in aqueous medium, followed by slow water removal. FTIR spectroscopy has shown drastic conformation changes of chitosan macromolecular chains—from a stiff coil to a straight one, while wide angle X-ray diffraction evidenced a layered morphology of the biopolymer films. Contact angle and surface free energy determination indicated a higher biocompatibility of the new biopolymers as compared to the chitosan parent, while the microbiological screening demonstrated their self-defense properties against common and virulent pathogen agents.

Formation of polyelectrolyte complexes with diethylaminoethyl dextran: charge ratio and molar mass effect.

The formation of polyelectrolyte complexes (PECs) between carboxymethyl pullulan and DEAE Dextran, was investigated, in dilute solution, with emphasis on the effect of charge density (molar ratio or pH) and molar masses. Electrophoretic mobility measurements have evidenced that insoluble PECs (neutral electrophoretic mobility) occurs for charge ratio between 0.6 (excess of polycation) and 1 (stoichiometry usual value) according to the pH.

Effect of cross-linking methods on structure and properties of poly(ε-caprolactone) stabilized hydrogels containing biopolymers.

Different dense and porous biodegradable matrices based on solely atelocollagen, or with different atelocollagen and hyaluronic acid derivative ratios, were obtained by varying feeding formulations, cross-linking reaction parameters, and preparative protocols. The compositions and methods for forming hydrogels through a combination of physical and chemical cross-linking processes are provided. The chemical cross-linking was mainly mediated by a synthetic component, a poly(ε-caprolactone) reactive derivative, aiming the development of new hybrid hydrogels with tailored characteristics by an appropriate use of the advantages offered by the included natural and synthetic components and the selection of the preparative procedure.

Thermal, dynamic mechanical, and dielectric analyses of some polyurethane biocomposites.

Polymer biocomposites based on segmented poly(ester urethane) and extracellular matrix components have been prepared for the development of tissue engineering applications with improved biological characteristics of the materials in contact with blood and tissues for long periods. Thermal, dynamical, and dielectrical analyses were employed to study the molecular dynamics of these materials and the influence of changing the physical network morphology and hydrogen bond interactions accompanied by phase transitions, interfacial effects, and polarization or conductivity. All phenomena that concur in the tested materials are evaluated by cross-examination of the dynamic mechanical characteristic properties (storage modulus, loss modulus, and loss factor) and dielectric properties (relative permittivity, relative loss factor, and loss tangent) as a function of temperature.

DNA-based diagnostic tests for Salmonella strains targeting hilA, agfA, spvC and sef genes.

The goal of this study was to evaluate the suitability of the hilA, agfA, spvC and sef genes amplification by PCR as a method for detection of Salmonella strains. Twenty nine isolates of Salmonella spp. including 6 different serotypes were analyzed in this study.

Segmented biopolyurethanes for medical applications.

Polyurethanes are one of the most popular groups of biomaterials applied for medical devices. Their segmented block copolymeric character endows them a wide range of versatility in terms of tailoring their physical properties, blood and tissue compatibility. Polyester- and polyether-urethanes have been modified with hydroxypropyl cellulose aiming the change of their surface and bulk characteristics to confer them biomaterial qualities.

Exploiting the vitamin B12 pathway to enhance oral drug delivery via polymeric micelles.

Vitamin B12 (VB12)-modified dextran-g-polyethyleneoxide cetyl ether (DEX-g-PEO-C16) was synthesized by linking VB12 residues to a DEX-g-PEO-C16 copolymer via a 2,2'-(ethylenedioxy)bis(ethylamine) spacer. The level of VB12 substitution on the DEX-g-PEO-C16 copolymer reached 1.68% (w/w).

Engineering polysaccharide-based polymeric micelles to enhance permeability of cyclosporin A across Caco-2 cells.

Purpose: To assess and compare the effectiveness of two types of polysaccharide-based micelles as delivery vehicles for poorly water soluble drugs by monitoring their permeability across Caco-2 cell monolayers.

Methods: Dextran (DEX) and hydroxypropylcellulose (HPC) were hydrophobically modified (HM) by grafting polyoxyethylene cetyl ether (POE-C16, 15 mol% and 5.4 mol%, respectively).

Galactosylated N-vinylpyrrolidone-maleic acid copolymers: synthesis, characterization, and interaction with lectins.

Water-soluble artificial glycoconjugate polymers were synthesized from poly(N-vinylpyrrolidone-co-maleic anhydride) by amidation with an amine-containing galactose derivative. The glycopolymers having different galactose contents were fully characterized in terms of chemical structure by NMR and potentiometric titrations, and their aqueous behavior was studied by viscometric measurements. Their specific binding properties were examined by enzyme-linked lectin assays using RCA(120) lectin.