Photoresponsive Helicity Control in Cholesteric Liquid Crystals Using a Chiral Arylazopyrazole Dopant: Chirality Amplification and Helix Inversion.

We report the design and synthesis of a novel chiral arylazopyrazole (AAP) molecular switch, which exhibits robust photoresponsive behavior in nematic liquid crystal (LC) hosts. By integrating both cholesterol and AAP moieties, the dopant induces significant reorganization in cholesteric liquid crystals (CLCs), leading to unprecedented control over helical pitch and chirality. Upon UV irradiation, the dopant undergoes efficient () to () photoisomerization, resulting in substantial changes in helical twisting power (HTP) across various nematic LC hosts such as 5CB (4-cyano-4'-pentylbiphenyl), DON-103, and ZLI-1132.

Direct observation of interactions between supported lipid bilayers and surfactants.

A mechanistic understanding of the interactions between surfactants and biomembranes is important to achieve hygiene benefits from external pathogens and chemical irritants. Supported lipid bilayers (SLBs), which are versatile platforms for mimicking envelopes and cell membranes, are widely used to study detergent dynamics at bio-nano interfaces. However, studies on the effect of a surfactant structure on SLBs are scarce, and it remains unclear how a surfactant solubilizes SLBs in real time from a morphological perspective.

Phase Transfer of AMIET-functionalized Gold Nanoparticles from Aqueous to Organic Solvents.

This paper presents a feasible and reliable phase transfer protocol for polyoxyethylene alkyl amine surfactant (AMIET)-coated gold nanoparticles (AuNPs) in aqueous media to chloroform using a pH-triggered method, through the liquid-liquid interface. In the initial stage, the colloidal aqueous dispersion is destabilized by pH adjustment towards the isoelectric pH of the nanoparticle, which promotes the separation of the particles from water. We further explored a mechanistic view of this phase transfer phenomenon, considering the orientation of hydrophilic and hydrophobic moieties depending on the nature of the surrounding solvent.

Compression-induced Phase Transition in Adsorbed Monolayers of Alkylgalactosides at the Air/Water Interface.

Compression-induced formation of condensed-phase domains in adsorbed monolayers of alkylgalactosides (AGs) at the air/water interface was observed. When an aqueous solution of AGs was poured into a Langmuir trough, the AG molecules were spontaneously adsorbed from the solution at the air/water interface to form the adsorbed or Gibbs monolayer in an expanded, liquid-like phase at equilibrium. The monolayer was subsequently laterally compressed by the barriers of the trough, while simultaneously observing the system using a Brewster angle microscope (BAM).

Interactions of l-arginine with Langmuir monolayers of common phospholipids at the air-water interface.

The interactions of l-arginine (l-arg) with Langmuir monolayers of three most common phospholipids, which are sodium salt of dipalmitoylphosphatidylglycerol (DPPG), dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylethanolamine (DPPE), have been investigated at the air-water interface. The surface pressure-area (π-A) isotherms of these monolayers have been measured with a film balance and monolayer morphology has been observed by a Brewster angle microscopy (BAM). The DPPG monolayers on pure water do not show any phase transition but show irregular shaped condensed phases formed just after evaporation of the solvent at 20 °C.

Effect of Mineral-Oil Addition on Film Stability of Polar Lipid Constituents Derived from Meibum.

We studied the effects of mineral oil (MO) on the properties and structure of a spread monolayer of polar lipid constituents in meibum, by performing cyclic lateral compression-expansion experiments using a Langmuir trough. A meibum sample without nonpolar lipids (meibumΔnonpolar-lipid) was prepared by removing the nonpolar lipids from biological meibum extruded from rabbit eyelids and spread on a water surface for measuring the cyclic surface pressure (π)-film area (A) isotherms with in situ observation of the film morphology using a Brewster angle microscope. The meibumΔnonpolar-lipid formed a homogeneous fluid monolayer and underwent collapse upon compression.

Role of Endogenous Ingredients in Meibum and Film Structures on Stability of the Tear Film Lipid Layer against Lateral Compression.

The property and structure of spread films of meibum extruded from rabbit eyelids and its fractions were investigated using the Langmuir film balance technique and Brewster angle microscopy in order to understand the influence of endogenous ingredients in meibum on the structure and stability of the tear film lipid layer against mechanical stimulus. Surface pressure (?)?film area ( A) isotherms for meibum were measured upon repetitive high-speed compression?expansion cycles and were found almost identical to each other with very small hysteresis, indicating the high stability of the meibum film. Brewster angle microcopy observation implied the spontaneous formation of condensed-phase network structures which consist primarily of wax esters and cholesteryl esters as nonpolar ingredients, coexisting with a monolayer phase of polar lipids two-dimensionally confined by the networks, which were spontaneously formed in the meibum film.

Effective quorum quenching with a conformation-stable recombinant lactonase possessing a hydrophilic polymeric shell fabricated via electrospinning.

Quorum sensing (QS) in Gram-negative bacteria is frequently regulated by the diffusible signal N-acylhomoserine lactone (AHL) along with the production of virulence factors in pathogens. To inhibit QS, we fabricated heat-resistant, long-term-stable AHL-lactonase AiiM by electrospinning (ES) aqueous polyvinyl alcohol (PVA) solution containing genetically engineered AiiM with a maltose-binding protein (MBP) tag. MBP-AiiM was immobilized via its inclusion within a dense PVA shell formed during the drying process of ES, followed by cross-linking between hydroxyl groups on PVA.

Novel quorum quenching enzymes identified from draft genome of sp. TAS13.

sp. strain TAS13 isolated from an activated sludge sample degrades -acylhomoserine lactones (AHLs) that are widely utilized as a signal in bacterial quorum sensing systems. The draft genome of sp.

Adsorption of dimethyl silicone onto hair-surface models prepared with micro-phase separated monolayers.

The adsorption of dimethylsilicone (DMS) from its emulsion onto hair-surface models was investigated. The model surfaces were prepared on silicon wafers by utilizing a micro-phase separation in mixed Langmuir monolayers with a chemically adsorptive organosilane, n-octadecyltriethoxysilane (ODTES), as one component. The resulting surfaces consisted of hydrophobic micro-domains of polymerized ODTES and a surrounding hydrophilic surface silanol (SiOH) region of the silicon wafer, corresponding to the healthy and damaged regions of the hair surface, respectively, in terms of surface wettability.

Temperature and compression rate independent domain shape in Langmuir monolayers of di-n-dodecyl hydrogen phosphate at the air-water interface.

Thermodynamic and morphological properties of Langmuir monolayers of di-n-dodecyl hydrogen phosphate (DDP) have been studied by film balance and Brewster angle microscopy (BAM) over a wide range of temperature between 5 and 40 degrees C. From pi-A isotherms, a generalized phase diagram consisting of gas (G), liquid expanded (LE) and liquid condensed (LC) phases is constructed for the DDP monolayers. The BAM images show the formation of gas bubble in the bright background of LE phase during G-LE phase transitions and fingering LC domains during LE-LC phase transitions.

Self-assembly and crystallization behavior of mesoporous, crystalline HfO2 thin films: a model system for the generation of mesostructured transition-metal oxides.

Mesoporous thin films of crystalline hafnium oxide were fabricated by evaporation-induced self-assembly in combination with sol-gel processing, followed by a suitable post heat-treatment procedure to initiate the crystallization. A novel type of block-copolymer template was used as structure-directing agent, which generated a distorted cubic arrangement of spherical mesopores, the size of which could be quantified by suitable techniques, such as ellipsometry-porosimetry, small-angle X-ray scattering, and atomic force microscopy. Detailed insights into the nature of the crystallization process of mesostructured hafnium oxide were obtained by temperature-dependent, in situ X-ray scattering experiments.

How many phases and phase transitions do exist in Gibbs adsorption layers at the air-water interface?

Four different phases and four different first-order phase transitions have been shown to exist in Gibbs adsorption layers of mixtures containing n-hexadecyl dihydrogen phosphate (n-HDP) and L-arginine (L-arg) at a molar ratio of 1:2. These conclusions have been made from surface pressure-time (pi-t) adsorption isotherms measured with a film balance and from monolayer morphology observed with a Brewster angle microscopy (BAM). The observed four phases are gas (G), liquid expanded (LE), liquid condensed (LC) and LC' phases.

Weak first-order tilting transition in monolayers of mono- and bipolar docosanol derivatives.

A systematic analysis of pressure-area isotherms and grazing incidence X-ray diffraction (GIXD) data of 22-methoxydocosan-1-ol (H3C-O-(CH2)22-OH, MDO), docosan-1-ol (H3C-(CH2)21-OH, DO), and docosyl methyl ether (H3C-(CH2)21-O-CH3, DME) monolayers on pure water between 10 and 35 degrees C is presented. All monolayers form fully condensed phases in the investigated temperature region. The GIXD data reveal that the monolayers exhibit the phase sequence -S at lower temperature and -LS at higher temperature.

Interactions of L-arginine with Langmuir monolayers of di-n-dodecyl hydrogen phosphate at the air-water interface.

The surface phase behavior of di-n-dodecyl hydrogen phosphate (DDP) in Langmuir monolayer and its interactions with L-arginine (L-arg) have been investigated by measuring pi-A isotherms with a film balance and observing monolayer morphology with a Brewster angle microscopy (BAM). The DDP monolayers on pure water show a first-order liquid expanded-liquid condensed (LE-LC) phase transition and form fingering LC domains having uniform brightness at different temperatures. At 15 degrees C, the pi-A isotherms on pure water and on different concentration solutions of L-arg show a limiting molecular area at approximately 0.

Surface phase behavior of di-n-tetradecyl hydrogen phosphate in Langmuir monolayers at the air-water interface.

Surface phase behavior of di-n-tetradecyl hydrogen phosphate, DTP, has been studied by measuring pi-A isotherms with a film balance and observing monolayer morphology with a Brewster angle microscopy (BAM) at different temperatures. A generalized phase diagram, which shows a triple point for gas (G), liquid-expanded (LE) and liquid-condensed (LC) phases at about 32 degrees C, is constructed for the amphiphile. Below the triple point, a first-order G-LC phase transition has been shown to occur, whereas a first-order G-LE phase transition followed by another first-order LE-LC transition has been found to take place at a temperature above the triple point.

Kinetic appearance of first-order gas-liquid expanded and liquid expanded-liquid condensed phase transitions below the triple point.

Phase diagram of Gibbs monolayers of mixtures containing n-hexadecyl phosphate (n-HDP) and L-arginine (L-arg) at a molar ratio of 1:2 has been constructed by measuring surface-pressure-time (pi-t) isotherms with film balance and by observing monolayer morphology with Brewster angle microscopy (BAM). This phase diagram shows a triple point for gas (G), liquid expanded (LE), and liquid condensed (LC) phases at around 6.7 degrees C.

Effect of temperature on the surface phase behavior of n-hexadecyl dihydrogen phosphate in adsorption layers at the air-water interface.

We present the adsorption kinetics and the surface phase behavior of n-hexadecyl dihydrogen phosphate (n-HDP) at the air-water interface by film balance and Brewster angle microscopy (BAM). A phase diagram, which shows a triple point at about 25.8 degrees C, is constructed by measuring the surface pressure (pi)-time (t) adsorption isotherms.

Determination of a merocyanine J-aggregate structure and the significant contribution of the electric dipole interaction to the exciton band wavelength.

The molecular alignment of a merocyanine (MC) J-aggregate monolayer at the air-water interface was determined by a grazing incidence x-ray diffraction method. The obtained molecular arrangement apparently shows that the conventional formula, which accounts only for the transition dipole interaction, is not sufficient to figure out the exciton band wavelength, suggesting the importance of the electric dipole (ED) interaction. We derived a simple formula for the ED interaction energy under an extended dipole approximation and clarified the ED contribution in the MC J aggregate.