Calcined clay-substituted sustainable cement binders: a holistic review.

The inclusion of clays in concrete not only reduces the production of Portland cement (PC) and the consumption of raw materials but also offers an alternative to PC that can significantly lower CO emissions during calcination, along with requiring relatively less thermal energy compared to PC production. This effect can considerably reduce global warming and climate change issues. This paper reviews the effect of calcined clay (CC) substitution, particularly calcined bentonite (CB) and metakaolin (MK), on the fresh (including reaction characteristics), fundamental mechanical, and durability (including permeability, and acidic and corrosion attack resistance) properties.

Stabilization/solidification of heavy metal-contaminated marl soil using a binary system of cement and fuel fly ash.

The stabilization/solidification (S/S) method is one of the most effective remediation techniques for treating contaminated soils. Several stabilizers, mostly the cementitious materials, have been used for the S/S treatment. In this paper, the feasibility of utilizing fuel fly ash (FFA) as a partial replacement of ordinary Portland cement (OPC) for the S/S treatment of marl soil contaminated with heavy metals was investigated.

3D Printable Geopolymer Composites Reinforced with Carbon-Based Nanomaterials - A Review.

Three-dimensional (3D) geopolymer printing (3DGP) technology is a rapidly evolving digital fabrication method used in the construction industry. This technology offers significant benefits over 3D concrete printing in terms of energy saving and reduced carbon emissions, thus promoting sustainability. 3DGP technology is still evolving, and researchers are striving to develop high-performance printable materials and different methods to improve its robustness and efficiency.

Synthesis of waste limestone powder-based alkali-activated binder: experimental, optimization modeling, and eco-efficiency assessment.

More than half of the CO emissions during the manufacturing of ordinary Portland cement (OPC) occur due to the calcination of calcium carbonate in addition to burning of fossil fuel to power the process. Consequently, there is a concerted effort to decrease the carbon footprint associated with this process, by minimizing the use of OPC. In line with this trend, an attempt was made in the reported study to synthesize a novel alkali-activated binder using CaCO-rich waste limestone powder (WLSP) as a precursor.

Electrical Stability and Piezoresistive Sensing Performance of High Strain-Range Ultra-Stretchable CNT-Embedded Sensors.

Highly flexible and stretchable sensors are becoming increasingly widespread due to their versatile applicability in human/robot monitoring sensors. Conductive polymeric composites have been regarded as potential candidates for such sensors, and carbon nanotubes (CNTs) are widely used to fabricate such composites. In the present study, CNT-embedded high flexible sensors were fabricated using a facile three-roll milling method, which mitigates the drawbacks of the conventional fabrication methods.

Facile Synthesis of Sprayed CNTs Layer-Embedded Stretchable Sensors with Controllable Sensitivity.

Flexible electronic devices have gained significant interest due to their different potential applications. Herein, we report highly flexible, stretchable, and sensitive sensors made of sprayed CNT layer, sandwiched between two polymer layers. A facile fabrication process was employed in which the CNT solution was directly sprayed onto a patterned bottom polymer layer, above which a second polymer layer was casted to get a sandwiched composite structure.

The Effects of Temperature on the Hydrothermal Synthesis of Hydroxyapatite-Zeolite Using Blast Furnace Slag.

Blast furnace slag, an industrial by-product, is emerging as a potential raw material to synthesize hydroxyapatite and zeolite. In this study, the effects of temperature on the hydrothermal synthesis of hydroxyapatite-zeolite from blast furnace slag were investigated. Specimens were synthesized at different temperatures (room temperature, 50, 90, 120, or 150 °C).

Synthesis of geopolymer-supported zeolites via robust one-step method and their adsorption potential.

The present study proposes a robust one-step hydrothermal treatment method for synthesis of high strength geopolymer-supported zeolites utilizing industrial by-products (fly ash and blast furnace slag), which can be potentially used as bulk-type solid adsorbents. The results revealed that the geopolymer-supported zeolites, possessing distinct strengths, zeolite phases (Na-P1, Na-chabazite, and analcime) and pore features depending on the mix design and synthesis conditions, can be easily synthesized employing the proposed one-step method. The geopolymer-supported zeolites exhibited the characteristics of mesoporous materials which are typically desired for commercial adsorbents.