Acid resistance and bond strength of calcium-containing adhesive on enamel.

Introduction And Aims: Marginal sealing by enamel bonding is important to enhance the durability of the restoration and prevent secondary caries after operative procedure. This study aimed to evaluate the enamel acid resistance and bond strength of an experimental calcium-containing adhesive system.

Methods: All materials were provided by Kuraray Noritake Dental, Inc.

Acute Mitral Regurgitaion Initially Misdiagnosed As Pneumonia: A Case Report.

Heart failure due to acute mitral regurgitation (MR) may present with atypical findings on physical examination and transthoracic echocardiography (TTE), making the diagnosis difficult. A 72-year-old male was transferred to our hospital with severe cardiorespiratory failure and was initially suspected to have severe pneumonia based on the acute onset and imaging findings. The patient was eventually diagnosed with acute heart failure secondary to MR.

Enhancement of mineral density and mechanical properties in root caries treated with silver diammine fluoride and glass ionomer cement, with emphasis on silver ion distribution.

Objectives: This study aimed to measure the distribution of silver ion (Ag), mineral recovery, and nanohardness in carious lesions and comprehensively evaluate the degree of dentin restoration.

Methods: Sixty human teeth with root caries were randomly assigned to the control, silver diammine fluoride (SDF) [Safo], and SDF+Glass ionomer cement (GIC) treatment [Safo+Fuji] groups. Micro-computed tomography (micro-CT) was performed at five time points for each sample before/after treatment to evaluate mineral density within and around carious lesions.

Petroleum Coke Embedded in Cigarette Butts: All Waste-Derived Solar Evaporator for Effective Water Evaporation.

Solar-driven interfacial evaporation is an eco-friendly solution for tackling the impending water scarcity the world is facing in our century. In this work, a solar-driven interfacial evaporator was prepared from cigarette butts loaded with petroleum coke powder (Filter-PetCoke), a by-product of the oil refinery processes, for the improvement of the absorption of the incident solar light. A comparison between a flat 2D and a 3D evaporator with a surface composed of orderly patterned protrusions of 2.

Analysis of reaction products on hydroxyapatite created by tooth etchants with different compositions.

Purpose: The purpose of this study was to investigate the reaction products formed by application of three tooth etchants to hydroxyapatite.

Methods: Tooth etchants with three different compositions, designed for application to teeth before dental adhesive - " K-etchant GEL" (containing phosphoric acid), "Enamel Conditioner" (containing organic acids), and "Multi Etchant" (containing acidic monomer) - were applied to hydroxyapatite plates.

Results: Atomic force microscopy measurements revealed that Multi Etchant formed nano-sized particles on the hydroxyapatite.

Evaluation of Incipient Enamel Caries at Smooth Tooth Surfaces Using SS-OCT.

(1) Background: Dental caries, if diagnosed at the initial stage, can be arrested and remineralized by a non-operative therapeutic approach preserving tooth structure. Accurate and reproducible diagnostic procedure is required for the successful management of incipient caries. The aim of this study was to evaluate the diagnostic accuracy of 3D swept-source optical coherence tomography (3D SS-OCT) for enamel caries at smooth tooth surface if the lesion was with remineralization.

Critical Side Chain Effects of Cell-Penetrating Peptides for Transporting Oligo Peptide Nucleic Acids in Bacteria.

Of various methods for delivering functional molecules into cells, a chemical approach using cell-penetrating peptides (CPPs) is facile and highly efficient. Currently, however, there are few examples of CPPs highly efficient with bacteria in contrast to CPPs targeting animal cells, and thus our understanding of the structural effects of these bacteria-efficient CPPs, termed as BCPPs, on permeation efficiency is limited. Herein, we report a comprehensive investigation on the permeation efficiencies of cationic short peptides through bacterial cell membranes.

[Investigation of Preferences in Working Environment of Students for Maintaining Uniform Geographical Distribution of Radiological Technologists].

Purpose: This study was designed to assess working environment preferences of students in the Department of Radiological Technology using conjoint analysis for establishing an efficient medical system.

Method: We carried a questionnaire survey on working environment preferences for 196 students in the Department of Radiological Technology in Japan. We defined eight characteristics for virtual medical facilities as follows: presence of colleagues who can be consulted, employment status, number of night shift per month, academic meeting participation, number of hospital beds, possession of nuclear medicine imaging systems and radiation therapy systems, location of medical facilities, and change rate in annual income.

Effect of pH on the performance of an acidic biotrickling filter for simultaneous removal of HS and siloxane from biogas.

Acidic biotrickling filters (BTF) can be used for simultaneous removal of hydrogen sulfide (HS) and siloxane from biogas. In this study, the performance of a BTF under different acidic pH conditions was investigated. The removal profile of HS showed that 90% of HS removal was achieved during the first 0.

Effects of potassium and sodium fluoride in different concentrations on micro-shear bond strength and inhibition of demineralization.

The aim of this study was to investigate the effects of potassium fluoride (KF) and sodium fluoride (NaF) in different concentrations on micro-shear bond strength (µSBS) and their protective effects against acid. The enamel blocks were treated with several concentrations of KF and NaF. For µSBS, Clearfil SE Bond 2 was applied to the treated surface and resin composite was light-cured, then examined using a universal testing machine.

Abiotic Factors Promote Cell Penetrating Peptide Permeability in Enterobacteriaceae Models.

Conventionally, the delivery of biomolecules into bacteria for the generation of characterized or functional mutants has relied greatly on horizontal gene transfer techniques. However, the low compatibility of these techniques with novel or hard-to-transform bacteria currently serves as a challenge to the bioengineering field. Here, we explored the use of cell penetrating peptides (CPPs) as an alternative biomolecule delivery approach by investigating the effects of the abiotic factors during CPP permeation.

Evaluation of experimental calcium-containing primer in adhesive system on micro-tensile bond strength and acid resistance.

Modern adhesive systems have been developed for enhanced mechanical and antibacterial properties; however, no such systems contain a calcium source to enhance bond strength. Therefore, we evaluated the effect of an experimental calcium-containing primer (10 wt% CaCl) in two-step self-etching adhesive systems on micro-tensile bond strength (μ-TBS) and acid resistance in dentin adhesive interface observations after acid-challenge using scanning electron microscopy. Using two types of primers and bonding agents (Clearfil SE Bond primer (SEP), experimental calcium-containing primer (CaP), Clearfil SE Bond (SEB), and Clearfil Protect Bond), we prepared four experimental groups.

Effect of dentin contamination with two hemostatic agents on bond strength of resin-modified glass ionomer cement with different conditioning.

This study evaluated the effect of two hemostatic agents on bond strength of resin-modified glass ionomer cement (RMGIC) to root dentin after using different pretreatment solutions compared to resin composite with a 2-step self-etch adhesive. Dentin specimens were either uncontaminated or contaminated with a ferric sulphate or aluminum chloride astringent, RMGIC was applied after conditioning with; Cavity Conditioner, Self Conditioner or Clearfil SE Primer, while a resin composite was bonded using Clearfil SE Bond. Microtensile bond strength (μTBS) values and failure modes were determined.

Evaluation of discoloration of sound/demineralized root dentin with silver diamine fluoride: In-vitro study.

The objective was to evaluate the effect of application of silver diamine fluoride (SDF) on discoloration of demineralized dentin over time. Dentin specimens were divided into four groups according to time of dentin demineralization. A 38% SDF solution was then applied to the dentin surfaces.

Early bond strengths of 4-META/MMA-TBB resin cements to CAD/CAM resin composite.

The purpose of this study was to evaluate the early tensile bond strengths of three different resin cements; Super Bond C&B (conventional and quick type) and ResiCem to a CAD/CAM composite block. A CAD/CAM composite block (Shofu Block HC) was ground and silanized according to the manufacturers' instructions before cementation. A conventional tensile bond strength test (Ø: 4 mm) was performed 10 min, 1 h and 24 h after bonding.

Influence of FCP-COMPLEX on bond strength and the adhesive-artificial caries-affected dentin interface.

FCP-COMPLEX is a newly developed solution containing fluoride, calcium, and phosphoric acid that has the potential to reinforce caries-affected dentin. This study evaluated the effect of FCP-COMPLEX on micro-tensile bond strength (µTBS) and acid-challenge at the dentin-adhesive interface. FCP-COMPLEX, 2% NaF, and distilled water were applied to artificial caries-affected dentin (ACAD) and the effect on acid-induced damage after resin composite restoration was observed.

Enamel Microcracks Induced by Simulated Occlusal Wear in Mature, Immature, and Deciduous Teeth.

Enamel wear, which is inevitable due to the process of mastication, is a process in which the microcracking of enamel occurs due to the surface contacting very small hard particles. When these particles slide on enamel, a combined process of microcutting and microcracking in the surface and subsurface of the enamel takes place. The aim of this study was to detect microscopic differences in the microcrack behavior by subjecting enamel specimens derived from different age groups (immature open-apex premolars, mature closed-apex premolars, and deciduous molars) to cycles of simulated impact and sliding wear testing under controlled conditions.

Influence of orthodontic self-etch adhesive on acid resistance of surface enamel.

The purpose of this study was to investigate the formation of acid-base resistant zone (ABRZ) of enamel surface during bracket bonding by using three self-etch adhesives presently available in the orthodontic treatment. Also, the relation between the thickness of the ABRZ and bonding strength, the relation between the thickness of the ABRZ and the concentration of fluoride ions contained in the adhesives, were discussed respectively. The ABRZ was formed with all self-etch orthodontic adhesives.

[Investigation of Preferences in Working Environment of Radiological Technologists Using Conjoint Analysis].

The purpose of this study is to assess working environment preferences of radiological technologists using conjoint analysis. We carried a questionnaire survey on working environment preferences for 200 radiological technologists working in medical facilities in Japan. We defined eight characteristics for virtual medical facilities as follows: presence of colleagues who can be consulted, employment status, number of overtime work per month, academic meeting participation, number of hospital beds, presence of nuclear medicine imaging systems and radiation therapy systems, location of medical facilities, and change rate in annual income.

Morphological evaluation of artificial caries-affected dentin after applying FCP-COMPLEX.

FCP-COMPLEX is a newly-developed solution that contains fluoride, calcium, and phosphoric acid. It has the potential to reinforce caries-affected dentin. The purpose of this study was to evaluate the effect of FCP-COMPLEX on the morphology of bovine artificial caries-affected dentin (ACAD).

Occurrence of spot signs from hypodensity areas on precontrast CT in intracerebral hemorrhage.

Objective: Both the spot signs, which is a bright spot on computed tomography angiography (CTA) source images, and hypodensity areas within a hematoma on precontrast CT scans, which presumably represent uncoagulated blood, have been reported to be predictive of hematoma enlargement in acute spontaneous intracerebral hematoma (ICH). The aim was to investigate densities on precontrast CT scans in an area within a hematoma that matched the locations of spot signs on CTA source images.

Methods: In consecutive cases of spontaneous ICH admitted within 6 h after onset, early spot signs on CTA source images and delayed spot signs on delayed-phase CT scans 90 s after CTA were evaluated.

Wear characteristics of trimethylolpropane trimethacrylate filler-containing resins for the full crown restoration of primary molars.

Although the demand for aesthetic restoration of primary molars has increased, the full-crown restorations using resin and the details of the wear characteristics of trimethylolpropane trimethacrylate (TMPT) filler containing resins for primary molars are not well understood. This study was conducted to determine whether new light-cured composite resin (Fantasista) and 4-META/MMATBB resin (Bondfill SB) are appropriate for full crown restoration of primary molars by evaluating their wear characteristics. Both resins products contain TMPT filler.

Dentin bonding performance and interface observation of an MMA-based restorative material.

The purpose of this study was to evaluate bonding performance and dentin interface acid resistance using a 4-META/MMA-TBB based restorative material (BF) compared to a conventional 4-META/MMA-TBB resin cement (SB), and the effect of sodium fluoride (NaF) addition to the materials. Dentin surfaces were treated with 10% citric acid-3% ferric chloride (10-3) or 4-META containing self-etching primer (TP), followed by application of BF or SB polymer powders with or without NaF, to evaluate microtensile bond strength (µTBS) in six experimental groups; 10-3/SB, 10-3/BF, TP/SB, TP/BF, TP/SB/NaF and TP/BF/NaF. SEM observation of the resin-dentin interface was performed after acid-base challenge to evaluate interfacial dentin resistance to acid attack.