Evaluation of the effects of temperature and centrifugation time on elimination of uncured resin from 3D-printed dental aligners.

The study investigated the effects of temperature and centrifugation time on the efficacy of removing uncured resin from 3D-printed clear aligners. Using a photo-polymerizable polyurethane resin (Tera Harz TC-85, Graphy Inc., Seoul, Korea), aligners were printed and subjected to cleaning processes using isopropyl alcohol (IPA) or centrifugation (g-force 27.

Ni/Co/Carbon nitride derived from ZIF-67 (MOF) nanocomposite: Enhanced light-driven photocatalytic degradation of methylparaben, mechanism & toxicity.

A nickel oxide/cobalt/carbon nitride (Ni/Co/CN) nanocomposite synthesized via co-precipitation was used for the degradation of methylparaben (MEP). Various analytical techniques were used to ascertain the structural, optical, and electrochemical characteristics of the synthesized nanocomposite. The unique nature of the compound without any free particles over the CN was established.

Cobalt-molybdenum-selenide nanoflowers for bifunctional visible light photocatalysis.

The renewability and zero carbon emissions of hydrogen make it a promising clean energy resource to meet future energy demands. Owing to its benefits, photocatalytic water-splitting has been extensively investigated for hydrogen production. However, the low efficiency poses a serious challenge to its implementation.

Zinc iron selenide nanoflowers anchored g-CN as advanced catalyst for photocatalytic water splitting and dye degradation.

Hydrogen has been considered as a promising clean energy source owing to its renewability and zero carbon emission. Accordingly, photocatalytic water splitting has drawn much attention as a key green technology of producing hydrogen. However, it has remained as a great challenge due to the low production rate and expensive constituents of photocatalytic systems.

Perceived Risk of Re-Identification in OMOP-CDM Database: A Cross-Sectional Survey.

Background: The advancement of information technology has immensely increased the quality and volume of health data. This has led to an increase in observational study, as well as to the threat of privacy invasion. Recently, a distributed research network based on the common data model (CDM) has emerged, enabling collaborative international medical research without sharing patient-level data.

Photocatalytic degradation of tetracycline using hybrid Ag/AgS@BiOI nanowires: Degradation mechanism and toxicity evaluation.

The wide use of antibiotics has caused their continual release and persistence in the eco-system, subsequently giving birth to antibiotic resistant bacterial species in the aquatic environment, thereby necessitating immediate and efficient remediation of the contaminated environment. In the present study, we synthesized Ag/AgS@BiOI nanowires with an average diameter of ∼150 nm and length of 3-5 μm using a hydrothermal method and employed them as photocatalysts for photocatalytic degradation of tetracycline as a model antibiotic. The nanowire achieved nearly complete degradation of tetracycline (∼99%) within 60 min at the optimal condition of 100 mg/L TC concentration and pH 2.

Highly efficient visible light photocatalysis of Ni Zn FeO (x= 0, 0.3, 0.7) nanoparticles: Diclofenac degradation mechanism and eco-toxicity.

Pharmaceuticals and personal care products occupy a predominant position with respect to both utility and release into the ecosystem, thereby contributing to environmental pollution at alarming rates. Of the several methods identified to minimize the concentration of PPCPs, nanomaterial based photocatalysis seems to be a potential alternative for it being highly economical and eco-friendly. In this study, we synthesized Nickel zinc ferrite (Ni-ZF) [Ni Zn FeO (x = 0, 0.

Cytotoxicity, Colour Stability and Dimensional Accuracy of 3D Printing Resin with Three Different Photoinitiators.

Biocompatibility is important for the 3D printing of resins used in medical devices and can be affected by photoinitiators, one of the key additives used in the 3D printing process. The choice of ingredients must be considered, as the toxicity varies depending on the photoinitiator, and unreacted photoinitiator may leach out of the polymerized resin. In this study, the use of ethyl (2,4,6-trimethylbenzoyl) phenylphosphinate (TPO-L) as a photoinitiator for the 3D printing of resin was considered for application in medical device production, where the cytotoxicity, colour stability, dimensional accuracy, degree of conversion, and mechanical/physical properties were evaluated.

Nickel decorated manganese oxynitride over graphene nanosheets as highly efficient visible light driven photocatalysts for acetylsalicylic acid degradation.

In this work, we prepared nanocomposites of nickel-decorated manganese oxynitride on graphene nanosheets and demonstrated them as photocatalysts for degradation of acetylsalicylic acid (ASA). The catalyst exhibited a high degradation efficiency over ASA under visible light irradiation and an excellent structural stability after multiple uses. Compared to manganese oxide (MnO) and manganese oxynitride (MnON) nanoparticles, larger specific surface area and smaller band gap were observed for the nanocomposite accounting for the enhanced photocatalytic efficiency.

Effects of Intrabony Length and Cortical Bone Density on the Primary Stability of Orthodontic Miniscrews.

Miniscrews have gained recent popularity as temporary anchorage devices in orthodontic treatments, where failure due to sinus perforations or damage to the neighboring roots have increased. Issues regarding miniscrews in insufficient interradicular space must also be resolved. This study aimed to evaluate the primary stability of miniscrews shorter than 6 mm and their feasibility in artificial bone with densities of 30, 40, and 50 pounds per cubic foot (pcf).

Primary Stability of Orthodontic Titanium Miniscrews due to Cortical Bone Density and Re-Insertion.

The increasing demand for orthodontic treatment over recent years has led to a growing need for the retrieval and reuse of titanium-based miniscrews to reduce the cost of treatment, especially in patients with early treatment failure due to insufficient primary stability. This in vitro study aimed to evaluate differences in the primary stability between initially inserted and re-inserted miniscrews within different cortical bone densities. Artificial bone was used to simulate cortical bone of different densities, namely 20, 30, 40, and 50 pound per cubic foot (pcf), where primary stability was evaluated based on maximum insertion torque (MIT), maximum removal torque (MRT), horizontal resistance, and micromotion.

Association of MC4R (rs17782313) with diabetes and cardiovascular disease in Korean men and women.

Background: Diabetes is mostly assessed by the fasting glucose level. Several studies reported that serum fasting glucose levels and cardiovascular disease are associated with MC4R.

Methods: A total of 4294 subjects participated in this study.

Nanoscale Perovskite-Sensitized Solar Cell Revisited: Dye-Cell or Perovskite-Cell?

A general and straightforward way of preparing few-nanometer-sized well-separated MAPbI Br (MA=methylammonium) perovskite photosensitizers on the surface of an approximately 1 μm thick mesoporous TiO photoanode was suggested through a two-step sequential deposition of low-concentrated lead halides (0.10-0.30 m PbI or PbBr ) and methylammonium iodide/bromide (MAI/MABr).

Enzymatic modification of daidzin using heterologously expressed amylosucrase in .

Amylosucrases (ASase, EC 2.4.1.

Role of apoptosis-inducing factor in myocardial cell death by ischemia-reperfusion.

Although apoptosis contributes to myocardial cell death in the ischemia-reperfused heart, the molecular basis of apoptosis is poorly understood. Apoptosis-inducing factor (AIF) has been characterized as a caspase-independent death effector. Upon the induction of apoptosis, mitochondrial AIF is released to the cytoplasm and then enters the nucleus, in which it induces chromatin condensation and 50 kbp DNA fragmentation.