Using pseudo-symmetrization to overcome dendrimer surface steric crowding: a birth of l-lysine-β-alanine architecture.

A synthetic approach to overcoming the surface crowding of polylysine dendrimers is reported. The introduction of a β-alanine unit on the α-amine of l-lysine creates a pseudo-symmetry between the two amino groups, which is found to reduce the steric bias when used as a dendrimer building block, compared with the parent l-lysine. Our findings show that this approach allows the unhindered growth of the l-lysine-β-alanine dendrimers until generation 8, thus significantly increasing the generation at which de Gennes' critical dense state of surface functional groups is reached, compared with traditional polylysine dendrimers.

Sustained Lysosomal Delivery of Enhanced Cy3-Labeled Acid Nanoparticles Restores Lysosomal pH in Retinal Pigment Epithelial Cells and Astrocytes.

Lysosomal pH is frequently elevated in age-dependent neurodegenerations like Age-related Macular Degeneration (AMD), Alzheimer's Disease (AD), and Parkinson's Disease (PD). Tools that restore lysosomal pH to an optimal acidic range could enhance enzymatic degradation and reduce waste accumulation. Acidic nanoparticles offer a promising strategy for restoring lysosomal function, but accurate tracking of organelle delivery and long-term retention is needed to optimize dosage.

Inhibition of c-Rel expression in myeloid and lymphoid cells with distearoyl -phosphatidylserine (DSPS) liposomal nanoparticles encapsulating therapeutic siRNA.

c-Rel, a member of the nuclear factor kappa B (NF-κB) family, is preferentially expressed by immune cells and is known to regulate inflammation, autoimmune diseases and cancer. However, there is a lack of therapeutic intervention to specifically inhibit c-Rel in immune cells. Recent success with Pfizer and Moderna mRNA lipid-encapsulated vaccines as well as FDA approved medicines based on siRNA prompted us to test a lipid nanoparticle-based strategy to silence c-Rel in immune cells.

General Synthetic Route to High-Quality Colloidal III-V Semiconductor Quantum Dots Based on Pnictogen Chlorides.

The synthesis of colloidal III-V quantum dots (QDs), particularly of the arsenides and antimonides, has been limited by the lack of stable and available group V precursors. In this work, we exploit accessible InCl- and pnictogen chloride-oleylamine as precursors to synthesize III-V QDs. Through coreduction reactions of the precursors, we achieve size- and stoichiometry-tunable binary InAs and InSb as well as ternary alloy InAsSb QDs.

Tuning the Electrocatalytic Oxygen Reduction Reaction Activity of Pt-Co Nanocrystals by Cobalt Concentration with Atomic-Scale Understanding.

The development of a suitable catalyst for the oxygen reduction reaction (ORR), the cathode reaction of proton exchange membrane fuel cells (PEMFC), is necessary to push this technology toward widespread adoption. There have been substantial efforts to utilize bimetallic Pt-M alloys that adopt the ordered face-centered tetragonal (L1) phase in order to reduce the usage of precious metal, enhance the ORR performance, and improve catalyst stability. In this work, monodisperse Pt-Co nanocrystals (NCs) with well-defined size (4-5 nm) and cobalt composition (25-75 at%) were synthesized via colloidal synthesis.

Nanocrystal Core Size and Shape Substitutional Doping and Underlying Crystalline Order in Nanocrystal Superlattices.

Substitutional doping is a potentially powerful technique to control the properties of nanocrystal (NC) superlattices (SLs). However, not every NC can be substituted into any lattice, as the NCs have to be close in size and shape, limiting the application of substitutional doping. Here we show that this limitation can be overcome by employing ligands of various size.

3D Nanofabrication via Chemo-Mechanical Transformation of Nanocrystal/Bulk Heterostructures.

Planar nanocrystal/bulk heterostructures are transformed into 3D architectures by taking advantage of the different chemical and mechanical properties of nanocrystal and bulk thin films. Nanocrystal/bulk heterostructures are fabricated via bottom-up assembly and top-down fabrication. The nanocrystals are capped by long ligands introduced in their synthesis, and therefore their surfaces are chemically addressable, and their assemblies are mechanically "soft," in contrast to the bulk films.

The dendritic effect and magnetic permeability in dendron coated nickel and manganese zinc ferrite nanoparticles.

The collective magnetic properties of nanoparticle (NP) solid films are greatly affected by inter-particle dipole-dipole interactions and therefore the proximity of the neighboring particles. In this study, a series of dendritic ligands (generations 0 to 3, G0-G3) have been designed and used to cover the surface of magnetic NPs to control the spacings between the NP components in single lattices. The dendrons of different generations introduced here were based on the 2,2-bis(hydroxymethyl)propionic acid (Bis-MPA) scaffold and equipped with an appropriate surface binding group at one end and several fatty acid segments at the other extremity.

Preparation and Self-Assembly of Dendronized Janus FeO-Pt and FeO-Au Heterodimers.

Janus nanoparticles (NPs) often referred to as nanosized analogs of molecular surfactants are amphiphilic structures with potential applications in materials science, biomedicine, and catalysis, and their synthesis and self-assembly into complex architectures remain challenging. Here, we demonstrate the preparation of Janus heterodimers via asymmetric functionalization of FeO-Pt and FeO-Au heterodimeric NPs. The hydrophobic and hydrophilic dendritic ligands that carry phosphonic acid and disulfide surface binding groups selectively coat the iron oxide and platinum (or gold) parts of the heterodimer, respectively.

A semi-combinatorial approach for investigating polycatenar ligand-controlled synthesis of rare-earth fluoride nanocrystals.

Rare-earth nanocrystals (RE NCs) are a valuable class of nanomaterials due to their ability to bring the attractive properties of rare earth bulk crystals to biomedical applications and solution-processable engineering. Of the bottom-up synthesis approaches, solvothermal methods yield highly crystalline and monodisperse RE NCs. Herein, we report a polycatenar ligand controlled synthesis of RE NCs using a semi-combinatorial approach with a microreactor setup that enables the investigation of the influences of several reaction parameters on the growth of the RE NCs.

Self-interrupted synthesis of sterically hindered aliphatic polyamide dendrimers.

2,2-Bis(azidomethyl)propionic acid was prepared in four steps and 85% yield from the commercially available 2,2-bis(hydroxymethyl)propionic acid and used as the starting building block for the divergent, convergent, and double-stage convergent-divergent iterative methods for the synthesis of dendrimers and dendrons containing ethylenediamine (EDA), piperazine (PPZ), and methyl 2,2-bis(aminomethyl)propionate (COOMe) cores. These cores have the same multiplicity but different conformations. A diversity of synthetic methods were used for the synthesis of dendrimers and dendrons.

Polycatenar Ligand Control of the Synthesis and Self-Assembly of Colloidal Nanocrystals.

Hydrophobic colloidal nanocrystals are typically synthesized and manipulated with commercially available ligands, and surface functionalization is therefore typically limited to a small number of molecules. Here, we report the use of polycatenar ligands derived from polyalkylbenzoates for the direct synthesis of metallic, chalcogenide, pnictide, and oxide nanocrystals. Polycatenar molecules, branched structures bearing diverging chains in which the terminal substitution pattern, functionality, and binding group can be independently modified, offer a modular platform for the development of ligands with targeted properties.

Dendronization-induced phase-transfer, stabilization and self-assembly of large colloidal Au nanoparticles.

The phase-transfer of CTAB-coated aqueous, spherical gold nanoparticles, with metallic core diameters ranging from ca. 27 to 54 nm, into organic solvents by exchanging the primitive polar bilayer with lipophilic, disulfide dendritic ligands is reported. The presence of such a thick nonpolar organic shell around these large nanoparticles enhances their stabilization against aggregation, in addition to enabling their transfer into a variety of solvents such as chloroform, toluene or tetrahydrofuran.

Quantifying "Softness" of Organic Coatings on Gold Nanoparticles Using Correlated Small-Angle X-ray and Neutron Scattering.

Small-angle X-ray and neutron scattering provide powerful tools to selectively characterize the inorganic and organic components of hybrid nanomaterials. Using hydrophobic gold nanoparticles coated with several commercial and dendritic thiols, the size of the organic layer on the gold particles is shown to increase from 1.2 to 4.

Dendron-Mediated Engineering of Interparticle Separation and Self-Assembly in Dendronized Gold Nanoparticles Superlattices.

Self-assembly of nanoparticles into designed structures with controlled interparticle separations is of crucial importance for the engineering of new materials with tunable functions and for the subsequent bottom-up fabrication of functional devices. In this study, a series of lipophilic, highly flexible, disulfide dendritic wedges (generations 0-4), based on 2,2-bis(hydroxymethyl)propionic acid, was designed to bind Au nanoparticles with a thiolate bond. By controlling the solvent evaporation rate, the corresponding dendron-capped Au hybrids were found to self-organize into hexagonal close-packed (hcp) superlattices.

Synthesis and direct C2 functionalization of imidazolium and 1,2,4-triazolium N-imides.

Pd-catalyzed direct C2 arylation and Cu-catalyzed direct one-pot alkynylation/intramolecular cyclization of azolium N-imides are reported. Various acetylenes, aryl iodides, and 1-alkyl substituents were examined. The mild protocol allows direct C2 arylation of azolium N-imides without the use of specialized reagents together with novel one-pot regioselective preparations of imidazole-pyrazolo and pyrazolo-1,2,4-triazole ring systems.

Push-pull triazenes derived from 1-(benzylideneamino)- and 1-(sulfonimido)-azolylidenes.

In-situ-generated neutral 1-(benzylideneamino)- and novel anionic 1-(sulfonimido)-azolylidenes react with organic azides to afford diverse classes of push-pull triazenes and triazene salts. The scope of the heterocyclic core and substituents at the N1 and N3 positions of NHC precursors together with the thermal properties of resulting compounds were examined.

Cu(I)-catalyzed regioselective synthesis of pyrazolo[5,1-c]-1,2,4-triazoles.

Cycloadditions of terminal alkynes to 1,2,4-triazolium N-imides in the presence of base and Cu(I) afford pyrazolo[5,1-c]-1,2,4-triazoles regioselectively. The scope of alkynes, the influence of the electronic nature of the leaving group, and variations in the 1-alkyl substituent were examined. Quantum chemical calculations were employed to explain the distinct reactivity of the propiolates.

Carbene-mediated transformations of 1-(benzylideneamino)benzimidazoles.

Carbene-mediated transformations of N-(3-butylbenzimidazol-3-ium-1-yl)-1-arylmethanimine iodides with carbon disulfide and benzoyl isothiocyanate gave the corresponding NHC·CS(2) betaines in 68-85% and benzoyl-[1-butyl-3-[(E)-(aryl)methyleneamino]benzimidazol-1-ium-2-carbothioyl]azanides, respectively, in 74-85% yields. However, reaction with excess isopropyl isothiocyanate in NaH/THF at room temperature yielded the 1-butyl-1',3'-diisopropyl-3-[(E)-(aryl)methyleneamino]spiro[benzimidazole-2,5'-imidazolidine]-2',4'-dithiones (74-77%).

Convenient synthesis of Ibuprofen and naproxen aminoacyl, dipeptidoyl and ester derivatives.

DL-Ibuprofen and L-naproxen were coupled with amino acids and other bioactive compounds to provide ibuprofen and naproxen bioconjugates in 61-95% yield as prodrugs or potential drug candidates.