Correction: Functionality integration in stereolithography 3D printed microfluidics using a "print-pause-print" strategy.

Correction for 'Functionality integration in stereolithography 3D printed microfluidics using a "print-pause-print" strategy' by Matthieu Sagot , , 2024, , 3508-3520, https://doi.org/10.1039/D4LC00147H.

Mitigating the influence of multivalent ions on power density performance in a single-membrane capacitive reverse electrodialysis cell.

In recent years, the energy generated by the salinity gradient has become a subject of growing interest as a source of renewable energy. One of the most widely used processes is reverse electrodialysis (RED), based on the use of ion exchange membranes and Faradaic electrodes. However, the use of real salt solutions containing mixtures of divalent and monovalent ions in the RED process results in a significant loss of recovered power, compared with salt solutions containing only monovalent ions.

Line Tension in a Thick Soap Film.

The thickness of freshly made soap films is usually in the micron range, and interference colors make thickness fluctuations easily visible. Circular patterns of constant thickness are commonly observed, either a thin film disc in a thicker film or the reverse. In this Letter, we evidence the line tension at the origin of these circular patterns.

Foam coarsening under a steady shear: interplay between bubble rearrangement and film thinning dynamics.

Aqueous foams are unstable and age by drainage and coarsening. Today, these effects are well described, as also their impact on foam properties. In that respect, the foam viscoelastic properties evolve in time as a consequence of coarsening which tends to increase the mean bubble size.

Stability of a directional Marangoni flow.

Marangoni flows result from surface-tension gradients, and these flows occur over finite distances on the surface, but the subsequent secondary flows can be observed on much larger lengthscales. These flows play major roles in various phenomena, from foam dynamics to microswimmer propulsion. We show here that if a Marangoni flow of soluble surfactants is confined laterally, the flow forms an inertial surface jet.

Microfluidic probing of the complex interfacial rheology of multilayer capsules.

Encapsulation of chemicals using polymer membranes enables control of their transport and delivery for applications such as agrochemistry or detergency. To rationalize the design of polymer capsules, it is necessary to understand how the membranes' mechanical properties control the transport and release of the cargo. In this article, we use microfluidics to produce model polymer capsules and study in situ their behavior in controlled divergent flows.

Luminescence thermometry for in situ temperature measurements in microfluidic devices.

Temperature control for lab-on-a-chip devices has resulted in the broad applicability of microfluidics to, e.g., polymerase chain reaction (PCR), temperature gradient focusing for electrophoresis, and colloidal particle synthesis.

Engulfment control of platinum nanoparticles into oxidized silicon substrates for fabrication of dense solid-state nanopore arrays.

We found that platinum (Pt) nanoparticles, upon annealing at high temperature of 1000 °C, are engulfed into amorphous fused-silica or thermal oxide silicon substrates. The same phenomenon was previously published for gold (Au) nanoparticles. Similar to the Au nanoparticles, the engulfed Pt nanoparticles connect to the surface of the substrates through conical nanopores, and the size of the Pt nanoparticles decreases with increasing depth of the nanopores.

One-Step Fabrication of pH-Responsive Membranes and Microcapsules through Interfacial H-Bond Polymer Complexation.

Biocompatible microencapsulation is of widespread interest for the targeted delivery of active species in fields such as pharmaceuticals, cosmetics and agro-chemistry. Capsules obtained by the self-assembly of polymers at interfaces enable the combination of responsiveness to stimuli, biocompatibility and scaled up production. Here, we present a one-step method to produce in situ membranes at oil-water interfaces, based on the hydrogen bond complexation of polymers between H-bond acceptor and donor in the oil and aqueous phases, respectively.

Interfacial Rheology of Hydrogen-Bonded Polymer Multilayers Assembled at Liquid Interfaces: Influence of Anchoring Energy and Hydrophobic Interactions.

We study the 2D rheological properties of hydrogen-bonded polymer multilayers assembled directly at dodecane-water and air-water interfaces using pendant drop/bubble dilation and the double-wall ring method for interfacial shear. We use poly(vinylpyrrolidone) (PVP) as a proton acceptor and a series of polyacrylic acids as proton donors. The PAA series of chains with varying hydrophobicity was fashioned from poly(acrylic acid), (PAA), polymethacrylic acid (PMAA), and a homemade hydrophobically modified polymer.

Interplay of Hydrogen Bonding and Hydrophobic Interactions to Control the Mechanical Properties of Polymer Multilayers at the Oil-Water Interface.

We probe the mechanical shear and compression properties of hydrogen-bonded polymer multilayers directly assembled at the oil-water interface using interfacial rheology techniques. We show that the polymer multilayers behave mechanically like a transient network, with elastic moduli that can be varied over 2 orders of magnitude by controlling the type and strength of physical interactions involved in the multilayers, which are controlled by the pH and the hydrophobicity of the polymer. Indeed, the interplay of hydrogen and hydrophobic interactions enables one to obtain a tighter and stronger network at the interface.