Self-Thickening Materials Derived from Phenylpropanoid Ene Reactions.

In this work, we report the observation of uncatalyzed ene reactions between several phenylpropanoid compounds and diethyl azodicarboxylate (DEAD). For allylbenzene, the reaction produces the ene product at molar ratios of up to 1:2 of allylbenzene to DEAD. At higher levels of DEAD, more complex reactions are observed.

Assessment of molecularly imprinted polymers as phosphate sorbents.

Phosphorus (P) is a non-renewable natural resource which is used extensively in agriculture as a fertilizer. Phosphate (PO) rocks are mined to meet growing agricultural demands induced by rising global populations. Much of the P used in agricultural fields finds its way into surface waters where it permanently resides, leading to devastating effects on the aquatic ecosystem through eutrophication of the waterbodies.

Polymer Coating Materials and Their Fouling Release Activity: A Cheminformatics Approach to Predict Properties.

A novel cheminformatics-based approach has been employed to investigate a set of polymer coating materials designed to mitigate the accumulation of marine biofouling on surfaces immersed in the sea. Specifically, a set of 27 nontoxic, amphiphilic polysiloxane-based polymer coatings was synthesized using a combinatorial, high-throughput approach and characterized for fouling-release (FR) activity toward a number of relevant marine fouling organisms, including bacteria, microalgae, and adult barnacles. In order to model these complex systems adequately, a new computational technique was used in which all investigated polymer-based coating materials were considered as mixture systems comprising several compositional variables at a range of concentrations.

Combinatorial materials research applied to the development of new surface coatings XVI: fouling-release properties of amphiphilic polysiloxane coatings.

High-throughput methods were used to prepare and characterize the fouling-release (FR) properties of an array of amphiphilic polysiloxane-based coatings possessing systematic variations in composition. The coatings were derived from a silanol-terminated polydimethylsiloxane, a silanol-terminated polytrifluorpropylmethylsiloxane (CF3-PDMS), 2-[methoxy(polyethyleneoxy)propyl]-trimethoxysilane (TMS-PEG), methyltriacetoxysilane and hexamethyldisilazane-treated fumed silica. The variables investigated were the concentration of TMS-PEG and the concentration of CF3-PDMS.

Surface structures of PDMS incorporated with quaternary ammonium salts designed for antibiofouling and fouling release applications.

Poly(dimethylsiloxane) (PDMS) materials have been extensively shown to function as excellent fouling-release (FR) coatings in the marine environment. The incorporation of biocide moieties, such as quaternary ammonium salts (QAS), can impart additional antibiofouling properties to PDMS-based FR coating systems. In this study, the molecular surface structures of two different types of QAS-incorporated PDMS systems were investigated in different chemical environments using sum frequency generation vibrational spectroscopy (SFG).

Iron nanoparticles coated with amphiphilic polysiloxane graft copolymers: dispersibility and contaminant treatability.

Amphiphilic polysiloxane graft copolymers (APGCs) were used as a delivery vehicle for nanoscale zerovalent iron (NZVI). The APGCs were designed to enable adsorption onto NZVI surfaces via carboxylic acid anchoring groups and polyethylene glycol (PEG) grafts were used to provide dispersibility in water. Degradation studies were conducted with trichloroethylene (TCE) as the model contaminant.

The effects of model polysiloxane and fouling-release coatings on embryonic development of a sea urchin (Arbacia punctulata) and a fish (Oryzias latipes).

In recent decades attention has focused on the development of non-toxic fouling-release coatings based on silicone polymers as an alternative to toxic antifouling coatings. As fouling-release coatings gain market share, they will contribute to environmental contamination by silicones. We report effects of eight model polysiloxane and three commercial foul-release coatings on embryonic development of sea urchins and fish, Japanese medaka.

Combinatorial and high-throughput screening of materials libraries: review of state of the art.

Rational materials design based on prior knowledge is attractive because it promises to avoid time-consuming synthesis and testing of numerous materials candidates. However with the increase of complexity of materials, the scientific ability for the rational materials design becomes progressively limited. As a result of this complexity, combinatorial and high-throughput (CHT) experimentation in materials science has been recognized as a new scientific approach to generate new knowledge.

Combinatorial materials research applied to the development of new surface coatings XV: an investigation of polysiloxane anti-fouling/fouling-release coatings containing tethered quaternary ammonium salt groups.

As part of ongoing efforts aimed at the development of extensive structure−property relationships for moisture-curable polysiloxane coatings containing tethered quaternary ammonium salt (QAS) moieties for potential application as environmental friendly coatings to combat marine biofouling, a combinatorial/high-throughput (C/HT) study was conducted that was focused on four different compositional variables. The coatings that were investigated were derived from solution blends of a silanol-terminated polydimethylsiloxane (HO-PDMS-OH), QAS-functional alkoxysilane, and methyltriacetoxysilane. The compositional variables investigated were alkoxysilane functionality of the QAS-functional silane, chain length of the monovalent alkyl group attached to the QAS nitrogen atom, concentration of the QAS-functional alkoxysilane, and molecular weight of the HO-PDMS-OH.

Compounds from silicones alter enzyme activity in curing barnacle glue and model enzymes.

Background: Attachment strength of fouling organisms on silicone coatings is low. We hypothesized that low attachment strength on silicones is, in part, due to the interaction of surface available components with natural glues. Components could alter curing of glues through bulk changes or specifically through altered enzyme activity.

Two Photon Polymerization-Micromolding of Polyethylene Glycol-Gentamicin Sulfate Microneedles.

The use of microneedles for transdermal drug delivery is limited due to the risk of infection associated with formation of channels through the stratum corneum layer of the epidermis. The risk of infection associated with use of microneedles may be reduced by imparting these devices with antimicrobial properties. In this study, a photopolymerization-micromolding technique was used to fabricate microneedle arrays from a photosensitive material containing polyethylene glycol 600 diacrylate, gentamicin sulfate, and a photoinitiator.

Novel, UV-curable coatings containing a tethered biocide: Synthesis, characterization, and antimicrobial activity.

Cationic, UV -curable coatings containing the tethered biocide, triclosan, were produced and their antimicrobial activity toward Staphylococcus epidermidis and Escherichia coli determined. Two polysiloxanes functionalized with both cycloaliphatic epoxy and triclosan were synthesized using hydrosilylation. The functionalized polysiloxanes, with varied concentration of pendant triclosan, were used to produce UV-curable coatings with reasonably good coating properties.

Antifouling and antimicrobial mechanism of tethered quaternary ammonium salts in a cross-linked poly(dimethylsiloxane) matrix studied using sum frequency generation vibrational spectroscopy.

Poly(dimethylsiloxane) (PDMS) materials containing chemically bound (''tethered'') quaternary ammonium salt (QAS) moieties are being developed as new contact-active antimicrobial coatings. Such coatings are designed to inhibit the growth of microorganisms on surfaces for a variety of applications which include ship hulls and biomedical devices. The antimicrobial activity of these coatings is a function of the molecular surface structure generated during film formation.

Atomic layer deposition-based functionalization of materials for medical and environmental health applications.

Nanoporous alumina membranes exhibit high pore densities, well-controlled and uniform pore sizes, as well as straight pores. Owing to these unusual properties, nanoporous alumina membranes are currently being considered for use in implantable sensor membranes and water purification membranes. Atomic layer deposition is a thin-film growth process that may be used to modify the pore size in a nanoporous alumina membrane while retaining a narrow pore distribution.

Remediation of alachlor and atrazine contaminated water with zero-valent iron nanoparticles.

Zero-valent iron nanoparticles (nZVI, diameter < 90 nm, specific surface area = 25 m(2) g(-1)) have been used under anoxic conditions for the remediation of pesticides alachlor and atrazine in water. While alachlor (10, 20, 40 mg L(-1)) was reduced by 92-96% within 72 h, no degradation of atrazine was observed. The alachlor degradation reaction was found to obey first-order kinetics very closely.

Combinatorial materials research applied to the development of new surface coatings XIII: an investigation of polysiloxane antimicrobial coatings containing tethered quaternary ammonium salt groups.

High-throughput biological assays were used to develop structure - antimicrobial relationships for polysiloxane coatings containing chemically bound (tethered) quaternary ammonium salt (QAS) moieties. The QAS-functional polysiloxanes were derived from solution blends of a silanol-terminated polydimethylsiloxane, a trimethoxysilane-functional QAS (QAS-TMS), and methylacetoxysilane. Since the QAS moieties provide antimicrobial activity through interaction with the microorganism cell wall, most of the compositional variables that were investigated were associated with the chemical structure of the QAS-TMS.

Entrapment of iron nanoparticles in calcium alginate beads for groundwater remediation applications.

Zero-valent iron nanoparticles (nZVI) have been successfully entrapped in biopolymer, calcium (Ca)-alginate beads. The study has demonstrated the potential use of this technique in environmental remediation using nitrate as a model contaminant. Ca-alginate beads show promise as an entrapment medium for nZVI for possible use in groundwater remediation.

Nitrate removal by entrapped zero-valent iron nanoparticles in calcium alginate.

Zero-valent iron nanoparticles (nZVI) were successfully entrapped in calcium alginate beads. The potential use of this technique in environmental remediation using nitrate as a model contaminant was investigated. Kinetics of nitrate degradation using bare nZVI (approximately 35 nm dia) and entrapped nZVI were compared.

Detection of tethered biocide moiety segregation to silicone surface using sum frequency generation vibrational spectroscopy.

Polymer surface properties are controlled by the molecular surface structures. Sum frequency generation (SFG) vibrational spectroscopy has been demonstrated to be a powerful technique to study polymer surface structures at the molecular level in different chemical environments. In this research, SFG has been used to study the surface segregation of biocide moieties derived from triclosan (TCS) and tetradecyldimethyl (3-trimethoxysilylpropyl) ammonium chloride (C-14 QAS) that have been covalently bound to a poly(dimethylsiloxane) (PDMS) matrix.

Combinatorial materials research applied to the development of new surface coatings X: a high-throughput electrochemical impedance spectroscopy method for screening organic coatings for corrosion inhibition.

The objective of the study was to develop a high-throughput electrochemical impedance spectroscopy (HT-EIS) method for rapid and quantitative evaluation of corrosion protective coatings. A 12-element, spatially addressable electrochemical platform was designed, fabricated, and validated. This platform was interfaced to a commercial EIS instrument through an automated electronic switching unit.

Release characteristics of reattached barnacles to non-toxic silicone coatings.

Release mechanisms of barnacles (Amphibalanus amphitrite or Balanus amphitrite) reattached to platinum-cured silicone coatings were studied as a function of coating thickness (210-770 microm), elastic modulus (0.08-1.3 MPa), and shear rate (2-22 microm s(-1)).

Combinatorial materials research applied to the development of new surface coatings IX: an investigation of novel antifouling/fouling-release coatings containing quaternary ammonium salt groups.

Polysiloxane coatings containing chemically-bound ("tethered") quaternary ammonium salt (QAS) moieties were investigated for potential application as environmental-friendly coatings to control marine biofouling. A combinatorial/high-throughput approach was applied to the investigation to enable multiple variables to be probed simultaneously and efficiently. The variables investigated for the moisture-curable coatings included QAS composition, ie alkyl chain length, and concentration as well as silanol-terminated polysiloxane molecular weight.

Combinatorial materials research applied to the development of new surface coatings VII: an automated system for adhesion testing.

An automated, high-throughput adhesion workflow that enables pseudobarnacle adhesion and coating/substrate adhesion to be measured on coating patches arranged in an array format on 4x8 in.(2) panels was developed. The adhesion workflow consists of the following process steps: (1) application of an adhesive to the coating array; (2) insertion of panels into a clamping device; (3) insertion of aluminum studs into the clamping device and onto coating surfaces, aligned with the adhesive; (4) curing of the adhesive; and (5) automated removal of the aluminum studs.

Combinatorial materials research applied to the development of new surface coatings VI: An automated spinning water jet apparatus for the high-throughput characterization of fouling-release marine coatings.

Large numbers of coatings can be generated very quickly using a combinatorial high-throughput approach. Rapid screening assays are typically required to adequately evaluate and down select coating candidates to identify promising compositions. An automated, spinning water jet apparatus was developed to rapidly characterize the adhesion strength of marine organisms to coating surfaces.

Mini-review: combinatorial approaches for the design of novel coating systems.

Combinatorial and high throughput experimental methods are being applied to the design and development of novel polymers and coatings used in a number of application areas. Methods have been developed for polymer synthesis and screening and for the development of polymer thin film and coating libraries and the screening of these libraries for key properties such as surface energy and modulus. Combinatorial and high throughput methods enable the efficient exploration of a large number of compositional variables over a wide range.