Imaging of dehydration in particulate matter using Raman line-focus microscopy.

Crystalline solids can incorporate water molecules into their crystal lattice causing a dramatic impact on their properties. This explains the increasing interest in understanding the dehydration pathways of these solids. However, the classical thermal analytical techniques cannot spatially resolve the dehydration pathway of organic hydrates at the single particle level.

Evaluation of the solid state form of tadalafil in sub-micron thin films using nanomechanical infrared spectroscopy.

Assessing physical stability of drugs is important both in the development as well as in the production phase in the pharmaceutical industry. We used nanomechanical infrared (NAM-IR) spectroscopy based on photothermal response of a nanomechanical resonator, to investigate the solid state forms of tadalafil (TAD), under various storage conditions in sub-micron thin films. The amorphous TAD was stable, when kept at normal storage conditions of 24 °C, 45% relative humidity (RH) and shielded from light, however, it crystallized after four days when it was at stress storage conditions (40 °C, 70% RH, and direct sunlight).

Characterization of thin gelatin hydrogel membranes with balloon properties for dynamic tissue engineering.

Cell or tissue stretching and strain are present in any in vivo environment, but is difficult to reproduce in vitro. Here, we describe a simple method for casting a thin (about 500 μm) and soft (about 0.3 kPa) hydrogel of gelatin and a method for characterizing the mechanical properties of the hydrogel simply by changing pressure with a water column.

Nanopillar-Assisted SERS Chromatography.

Practical implementation of surfaced enhanced Raman spectroscopy (SERS) sensing is hindered by complexity of real-life samples, which often requires long and costly pretreatment and purification. Here, we present a novel nanopillar-assisted SERS chromatography (NPC-SERS) method for simultaneous quantitation of target molecules and analysis of complex, multicomponent fluids, e.g.

Ultrasensitive Microstring Resonators for Solid State Thermomechanical Analysis of Small and Large Molecules.

Thermal analysis plays an important role in both industrial and fundamental research and is widely used to study thermal characteristics of a variety of materials. However, despite considerable effort using different techniques, research struggles to resolve the physicochemical nature of many thermal transitions such as amorphous relaxations or structural changes in proteins. To overcome the limitations in sensitivity of conventional techniques and to gain new insight into the thermal and mechanical properties of small- and large-molecule samples, we have developed an instrumental analysis technique using resonating low-stress silicon nitride microstrings.

Label-Free Quantification of Anticancer Drug Imatinib in Human Plasma with Surface Enhanced Raman Spectroscopy.

Therapeutic drug monitoring (TDM) for anticancer drug imatinib has been suggested as the best way to improve the treatment response and minimize the risk of adverse reactions in chronic myelogenous leukemia (CML) and gastrointestinal stromal tumor (GIST) patients. TDM of oncology treatments with standard analytical methods, such as liquid chromatography-tandem mass spectrometry (LC-MS/MS) is, however, complex and demanding. This paper proposes a new method for quantitation of imatinib in human plasma, based on surface enhanced raman spectroscopy (SERS) and multivariate calibration using partial least-squares regression (PLSR).

Injection-Molded Microfluidic Device for SERS Sensing Using Embedded Au-Capped Polymer Nanocones.

To enable affordable detection and diagnostic, there is a need for low-cost and mass producible miniaturized sensing platforms. We present a fully polymeric microfluidic lab-on-a-chip device with integrated gold (Au)-capped nanocones for sensing applications based on surface-enhanced Raman spectroscopy (SERS). All base components of the device were fabricated via injection molding (IM) and can be easily integrated using ultrasonic welding.

Micromotors for drug delivery in vivo: The road ahead.

Autonomously propelled/externally guided micromotors overcome current drug delivery challenges by providing (a) higher drug loading capacity, (b) localized delivery (less toxicity), (c) enhanced tissue penetration and (d) active maneuvering in vivo. These microscale drug delivery systems can exploit biological fluids, as well as exogenous stimuli, like light-NIR, ultrasound and magnetic fields (or a combination of these), towards propulsion/drug release. Ability of these wireless drug carriers towards localized targeting and controlled drug release, makes them a lucrative candidate for drug administration in complex microenvironments (like solid tumors or gastrointestinal tract).

Detecting forensic substances using commercially available SERS substrates and handheld Raman spectrometers.

Ultra-sensitive in-field measurements of most forensic substances still today remain a challenge for first responders and forensic investigators. Handheld Raman spectroscopy equipment is getting more and more routinely used in the field for evidence collection, however, restricted to measurements of pure or high concentration samples. Here, surface-enhanced Raman scattering (SERS) sensing of common forensic substances with commercially available SERS substrates and handheld spectrometers, have been investigated.

Hacking CD/DVD/Blu-ray for Biosensing.

The optical pickup unit (OPU) within a CD/DVD/Blu-ray drive integrates 780, 650, and 405 nm wavelength lasers, diffraction-limited optics, a high-bandwidth optoelectronic transducer up to 400 MHz, and a nanoresolution x-, z-axis, and tilt actuator in a compact size. In addition, the OPU is a remarkable piece of engineering and could enable different scientific applications such as sub-angstrom displacement sensing, micro- and nanoimaging, and nanolithography. Although off-the-shelf OPUs can be easily obtained, manufacturers protect their datasheets under nondisclosure agreements to impede their availability to the public.

Large-Scale, Lithography-Free Production of Transparent Nanostructured Surface for Dual-Functional Electrochemical and SERS Sensing.

In this work, we present a dual-functional sensor that can perform surface-enhanced Raman spectroscopy (SERS) based identification and electrochemical (EC) quantification of analytes in liquid samples. A lithography-free reactive ion etching process was utilized to obtain nanostructures of high aspect ratios distributed homogeneously on a 4 in. fused silica wafer.

Quantitative Detection of Trace Level Cloxacillin in Food Samples Using Magnetic Molecularly Imprinted Polymer Extraction and Surface-Enhanced Raman Spectroscopy Nanopillars.

There is an increasing demand for rapid, sensitive, and low cost analytical methods to routinely screen antibiotic residues in food products. Conventional detection of antibiotics involves sample preparation by liquid-liquid or solid-phase extraction, followed by analysis using liquid chromatography-mass spectrometry (LC-MS), capillary electrophoresis (CE), or gas chromatography (GC). The process is labor-intensive, time-consuming, and expensive.