Non-Destructive Permittivity and Moisture Analysis in Wooden Heritage Conservation Using Split Ring Resonators and Coaxial Probe.

This study presents a wireless, non-invasive sensing system for monitoring the dielectric permittivity of materials, with a particular focus on applications in cultural heritage conservation. The system integrates a passive split-ring resonator tag, electromagnetically coupled to a compact antipodal Vivaldi antenna, operating in the reactive near-field region. Both numerical simulations and experimental measurements demonstrate that shifts in the antenna's reflection coefficient resonance frequency correlate with variations in the dielectric permittivity of the material under test. A calibration curve was established using reference materials-including low-density polyvinylchloride, polytetrafluoroethylene, polymethyl methacrylate, and polycarbonate-and validated through precise permittivity measurements. The system was subsequently applied to wood samples (fir, poplar, beech, and oak) at different humidity levels, revealing a sigmoidal relationship between moisture content and permittivity. The behavior was also confirmed using a portable and low-cost setup, consisting of a point-like coaxial sensor that could be easily moved and positioned as needed, enabling localized measurements on specific areas of interest of the sample, together with a miniaturized Vector Network Analyzer. These results underscore the potential of this portable, contactless, and scalable sensing platform for real-world monitoring of cultural heritage materials, enabling minimally invasive assessment of their structural and historical integrity. Moreover, by enabling the estimation of moisture content through dielectric permittivity, the system provides an effective method for early detection of water-induced deterioration in wood-based heritage items. This capability is particularly valuable for preventive conservation, as excessive moisture-often indicated by permittivity values above critical thresholds-can trigger biological or structural degradation.