Development of neutron activation analysis protocol for low power research reactors: The case of GHARR-1 miniature neutron source reactor (GHARR-1 MNSR).

Appl Radiat Isot

Department of Nuclear Engineering, School of Nuclear and Allied Sciences, College of Basic and Applied Sciences, University of Ghana, P.O. Box AE1, Atomic Energy, Kwabenya-Accra, Ghana.

Published: November 2025


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

We present an improved neutron activation analysis (NAA) protocol tailored for low-power (34 kW) Ghana Research Reactor-1 (GHARR-1), a miniature neutron source reactor (MNSR). This protocol is designed for routine multi-elemental analysis of sediment/soil samples. It requires 150 mg of analyte per irradiation section, and strategically adjusts irradiation and counting schemes based on radionuclide half-lives. The approach prioritizes operational efficiency and repeatability over reliance on advanced detection systems or elaborate gamma interference corrections. Despite operating without Compton suppression, coincidence counting, or dead-time correction systems, the protocol supports accurate quantification of over 40 elements. Performance validation was conducted through participation in international Interlaboratory Comparison exercises organized by the IAEA (PTNATIAEA series) and its Marine Environmental Studies Laboratory (MESL). Out of 156 submitted data points, 88 % yielded z-scores within |z|≤2, confirming analytical accuracy and international comparability. This work demonstrates that robust analytical outcomes can be achieved in low-power NAA laboratories using standard HPGe detectors and thoughtful experimental design. By combining effective protocol, optimized sample mass, and strategic timing, the method significantly extends the practical capabilities of low-power research reactors in environmental and geochemical applications, without the need for auxiliary hardware upgrades. These results reinforce relevance of low-power neutron sources in contributing to reliable trace element analysis, especially, resource-constrained settings.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.apradiso.2025.112099DOI Listing

Publication Analysis

Top Keywords

neutron activation
8
activation analysis
8
gharr-1 miniature
8
miniature neutron
8
neutron source
8
source reactor
8
protocol
5
development neutron
4
analysis
4
analysis protocol
4

Similar Publications

Development and characterization of a prototype selenium-75 high dose rate brachytherapy source.

Med Phys

September 2025

Medical Physics Unit, Department of Oncology, Faculty of Medicine, McGill University, Montréal, Québec, Canada.

Background: Se ( 120 days, 215 keV) offers advantages over Ir ( 74 days, 360 keV) as a high dose rate brachytherapy source due to its lower gamma energy and longer half-life. Despite its widespread use in industrial gamma radiography, a Se brachytherapy source has yet to be manufactured.

Purpose: A novel Se-based source design with a vanadium diselenide core, titled the SeCure source, was proposed.

View Article and Find Full Text PDF

The supported catalytically active liquid metal solution (SCALMS) concept is based on catalytically active metals dissolved in a low-melting-point liquid metal matrix. These solid alloy particles, deposited over a high area support, transform into a liquid alloy under reaction conditions. In this work, GaPt SCALMS materials of varying composition are investigated and focus on the change in the alloy composition during preheating, the actual high temperature propane dehydrogenation at 823 K, and after cool-down.

View Article and Find Full Text PDF

Boron nitride quantum dots combine several unique properties, including chemical stability, biocompatibility, and low cytotoxicity. These properties and tunable optical characteristics make them promising for use in boron neutron capture therapy simultaneously as therapeutic agents and fluorescent markers for cancer cells. In this paper we present a case study, in which the electronic structure of these dots is analyzed using DFT and TD-DFT methods providing a deeper understanding of their absorption properties.

View Article and Find Full Text PDF

Anchoring Ligand Electron Enables Robust Metal-Oxygen Coordination Toward 4.5 V O3-Type Sodium-Ion Battery Cathodes.

Angew Chem Int Ed Engl

September 2025

College of Materials Science and Opto-electronic Technology, Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, 100049, China.

High-voltage operation enables sodium-sufficient O3-type layered oxides to approach the maximum achievable energy densities for practical sodium-ion batteries (SIBs). This high-voltage regime, however, induces structural degradation strongly correlated with oxygen redox activity, a mechanism still incompletely resolved. Using prototypical O3-type NaNiFeMnO (NFM) as a model system, we identify the origin of this instability as a detrimental feedback loop between σ-type oxygen redox and cation migration.

View Article and Find Full Text PDF

Serine hydroxymethyltransferase (SHMT) is a critical enzyme in the one-carbon (1C) metabolism pathway catalyzing the reversible conversion of L-Ser into Gly and concurrent transfer of 1C unit to tetrahydrofolate (THF) to give 5,10-methylene-THF (5,10-MTHF), which is used in the downstream syntheses of biomolecules critical for cell proliferation. The cellular 1C metabolism is hijacked by many cancer types to support cancer cell proliferation, making SHMT a promising target for the design and development of novel small-molecule antimetabolite chemotherapies. To advance structure-assisted drug design, knowledge of SHMT catalysis is crucial, but can only be fully realized when the atomic details of each reaction step governed by the acid-base catalysis are elucidated by visualizing active site hydrogen atoms.

View Article and Find Full Text PDF