Salmonella spp. Inactivation During Hot Air Drying of Apples: Influence of Temperature, Bed Depth, and Air Velocity.

J Food Prot

U.S. Food and Drug Administration, 6502 South Archer Road, Bedford Park, IL 60501, United States. Electronic address:

Published: August 2025


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Dried fruit has been linked to recalls and outbreaks due to microbiological hazards. While most drying processes are optimized for product quality, microbiological safety may not always be prioritized. The food industry is required to validate process preventive controls to ensure they significantly minimize or prevent microbial hazards. This study aimed to evaluate the combined effects of temperature, drying bed depth, and air velocity on the inactivation of Salmonella on apple cubes. A cocktail of six Salmonella serovars was inoculated onto fresh Gala apple cubes (∼0.256 cm). A single layer of Salmonella-inoculated apple cubes was dyed red and placed atop un-inoculated cubes in a drying chamber to achieve final bed depths of 5.1, 8.9, or 12.7 cm. Apple cubes were dried at 88, 104, or 120 °C with air velocities of 2.10, 2.95, or 3.82 m/s. At multiple time points (n ≥ 5), samples were collected from the inoculated, dyed apple cubes on the top layer for water activity measurement and Salmonella enumeration. Across all drying conditions, an initial stable stage of apple a and Salmonella populations was observed with varying durations followed by a rapid decrease in both. The overall effect of drying temperature, bed depth, and air velocity on microbial inactivation followed a consistent pattern: Higher temperature reduced the drying time required to achieve comparable Salmonella reductions as elevated product temperature enhanced microbial inactivation. Similarly, lower bed depth allowed the thinner apple layers to reach higher temperatures more rapidly, accelerating microbial reduction. Increased air velocity shortened the constant-rate drying period, promoted a faster temperature increase in the apple cubes, and resulted in higher lethality within a shorter drying period. Although a 5-log reduction of Salmonella was achieved at the end of drying under all but one condition, the reductions were reached at varying endpoint water activity levels.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jfp.2025.100597DOI Listing

Publication Analysis

Top Keywords

apple cubes
24
bed depth
16
air velocity
16
depth air
12
drying
10
temperature bed
8
apple
8
water activity
8
microbial inactivation
8
drying period
8

Similar Publications

Salmonella spp. Inactivation During Hot Air Drying of Apples: Influence of Temperature, Bed Depth, and Air Velocity.

J Food Prot

August 2025

U.S. Food and Drug Administration, 6502 South Archer Road, Bedford Park, IL 60501, United States. Electronic address:

Dried fruit has been linked to recalls and outbreaks due to microbiological hazards. While most drying processes are optimized for product quality, microbiological safety may not always be prioritized. The food industry is required to validate process preventive controls to ensure they significantly minimize or prevent microbial hazards.

View Article and Find Full Text PDF

Fruit drying in the modern food industry requires easily operable, energy-saving, inexpensive, and efficient drying technologies. Furthermore, these technologies are critical for snacks that meet the various dietary sensitivities and requirements of consumers and provide a benefit to overall well-being. In this context, the aim was addressed to produce snacks of apple infused with probiotic microorganism Lactobacillus rhamnosus GG.

View Article and Find Full Text PDF

Insights into the material and 3D printing behaviour of fiber-enriched protein gels.

Food Res Int

February 2025

University of Hohenheim, Department of Plant-based Foods, Institute of Food Science and Biotechnology, Department of Plant-based Foods, University of Hohenheim 70599 Stuttgart, Germany. Electronic address:

One of the widely used materials in food printing is soy protein isolate (SPI) due to its functional and nutritional properties. However, a major printing drawback of SPI gels is network brittleness due to extensive aggregation leading to rheological properties that are unsuitable for printing. In this study, 0.

View Article and Find Full Text PDF

Mathematical Modeling of Inactivation During Apple Drying and Pre-Drying Heating in Closed Environments.

Foods

November 2024

Department of Industrial & Systems Engineering, University of Washington, P.O. Box 352650, Seattle, WA 98195, USA.

Drying is one of the most effective preservation methods for extending the shelf-life of perishable foods. The microbial safety of low-moisture food products had not been recognized as a concern until outbreaks reported over the past decade in products contaminated with bacterial pathogens, in particular . There is now an urgent need to understand the influence of process conditions on the thermal inactivation of pathogens in various drying operations.

View Article and Find Full Text PDF

Alginate coatings applied on apple cubes as a vehicle for Lacticaseibacillus casei: probiotic viability and overall quality of a new functional product.

J Sci Food Agric

January 2025

Grupo de Investigación en Ingeniería en Alimentos. Instituto de Ciencia y Tecnología de Alimentos y Ambiente (INCITAA), Facultad de Ingeniería, Universidad Nacional de Mar del Plata, Mar del Plata, Argentina.

Background: Worldwide, vegan and vegetarian lifestyles, as well as food allergies and intolerance (e.g. lactose intolerance and milk protein allergy) demand the development of alternatives to dairy-based probiotic foods.

View Article and Find Full Text PDF