98%
921
2 minutes
20
When terrestrial organisms locomote in natural settings, they must navigate complex surfaces that vary in incline angles and substrate roughness. Variable surface structures are common in arboreal environments and can be challenging to traverse. This study examines the walking gait of katydids (Tettigoniidae) as they traverse a custom-built platform with varying incline angles (30○, 45○, 60○, 75○, 90○) and substrate roughness (40, 120, and 320 grit sandpaper). Our results show that katydids walk more slowly as the incline angle increases and as katydid mass increases, with a decrease of around 0.3 body lengths per second for every 1○ increase in incline. At steeper inclines and larger sizes, katydids are also less likely to use an alternating tripod gait, opting instead to maintain more limbs in contact with the substrate during walking. Katydids also increased average duty factor when climbing steeper inclines and with increasing body mass. However, substrate roughness did not affect walking speed or gait preference in our trials. These findings provide insights into how environmental factors influence locomotor strategies in katydids and enhance our understanding of effective locomotor strategies in hexapods.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1093/icb/icaf139 | DOI Listing |
Phys Rev Lett
August 2025
Washington University, Physics Department, Saint Louis, Missouri 63130, USA.
Single electrons confined to a free neon surface and manipulated through the circuit quantum electrodynamics architecture is a promising novel quantum computing platform. Understanding the exact physical nature of the electron-on-neon (eNe) charge states is important for realizing this platform's potential for quantum technologies. We investigate how resonator trench depth and substrate surface properties influence the formation of eNe charge states and their coupling to microwave resonators.
View Article and Find Full Text PDFJ Colloid Interface Sci
September 2025
State Key Laboratory of Hydro Science and Engineering, and Department of Energy and Power Engineering, Tsinghua University, Beijing, 100084, China. Electronic address:
Hypothesis: On highly cleaned planar surfaces submerged in highly cleaned water, flat surface nanobubbles with an angle of attachment of ∼15 are observed - never on engineering surfaces submerged in plain water, though here unidentified cavitation nuclei are always present and cause low tensile strength.
Experiments: In the present study, surface nanobubbles are generated by standard experimental techniques on a polished steel surface, and we find that the shape and the angles of attachment of the bubbles are influenced by the local substrate topography. These observations align with the theory of non-adsorbed liquid zones, which explains a surface nanobubble as a bubble with a skin of contamination molecules, which bond along the bubble rim at a contact angle of ∼14.
Proc Biol Sci
September 2025
College of Science and Engineering, James Cook University, Townsville, Queensland, Australia.
Morphological adaptations facilitate effective movement within habitats. Claws are among the most common adaptations enabling organisms to use inclined and vertical surfaces. However, some taxa have evolved adhesive pads in addition to claws, with claws suggested to be more effective at gripping coarse surfaces, while pads attach better to fine-grained surfaces.
View Article and Find Full Text PDFJ Chem Phys
September 2025
School of Electronic Science and Engineering, Nanjing University, Nanjing 210023, China.
Designing functional materials with tailored properties often involves alloying different semiconductors, yet the nonlinear bandgap bowing effect complicates precise bandgap engineering, particularly in ultrawide-bandgap systems, such as Ga2O3 ternary alloys. In this work, we examined the bandgap nonlinearity and composition-dependent bowing in pure-phase α-(AlxGa1-x)2O3 epilayers (0 < x < 0.62) grown via laser molecular beam epitaxy on m-plane sapphire substrates.
View Article and Find Full Text PDFInt J Implant Dent
September 2025
Biomaterials Research Group, UWA Dental School, the University of Western Australia, Perth, Australia.
Introduction: Peri-implantitis (PI) is a biofilm-related condition driven by bacterial colonization on dental implant surfaces, leading to inflammation of the peri-implant connective tissue and progressive bone loss. Despite advancements, effective strategies for eradicating these biofilms remain elusive. While high-intensity focused ultrasound (HIFU) has been popularized in medicine, its effects on dental implant-attached biofilms remain unclear.
View Article and Find Full Text PDF