Sustainable Carotenoid Extraction from Macroalgae: Optimizing Microwave-Assisted Extraction Using Response Surface Methodology.

Life (Basel)

REQUIMTE/LAQV, ISEP, Polytechnic of Porto, Rua Dr. António Bernardino de Almeida 431, 4249-015 Porto, Portugal.

Published: November 2024


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

This study aimed at optimizing carotenoid extraction using the macroalga (L.) S.F.Gray as a model. Firstly, traditional extraction procedures were employed, using various solvents and temperatures to enhance the extraction conditions. Once the most effective extraction conditions were identified, the study transitioned to a more efficient and environmentally friendly approach, microwave-assisted extraction (MAE). By applying a three-parameter (solid-to-solvent ratio, temperature, and time) Box-Behnken design, the optimal extraction conditions were found to be a solid-to-solvent ratio of 1/13.6 g/mL at 60 °C for 15 min. Under these conditions, the predicted and experimental carotenoid contents were 2.94 and 2.12 µg/mL, respectively. Furthermore, an HPLC-DAD method was developed and validated for the characterization of carotenoids. β-Carotene was the predominant carotenoid in , alongside fucoxanthin. The optimized MAE method was applied to other seaweeds, including L., Stackhouse, (Stackhouse) Steentoft, L.M.Irvine & Farnham, and (Kjellman) Setchell. Among all, exhibited the highest carotenoid content compared to the others. This study concludes that MAE under optimized conditions is an effective and sustainable approach for carotenoid extraction, providing significant yields of bioactive compounds such as β-carotene and fucoxanthin, which have promising applications in enhancing human health and nutrition.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11676899PMC
http://dx.doi.org/10.3390/life14121573DOI Listing

Publication Analysis

Top Keywords

carotenoid extraction
12
extraction conditions
12
extraction
9
microwave-assisted extraction
8
conditions effective
8
solid-to-solvent ratio
8
carotenoid
5
conditions
5
sustainable carotenoid
4
extraction macroalgae
4

Similar Publications

The hidden dimension of oil extraction using green solvents on the physicochemical and structural properties of crude oil and defatted meals.

Food Chem

September 2025

Chemical Engineering Department, Universidade Federal de Santa Maria, Av. Roraima, 1000-7, 97105-900 Santa Maria, Rio Grande do Sul, Brazil. Electronic address:

Green solvents offer promising alternatives to n-hexane for sustainable vegetable oil extraction. This study evaluated ethanol, isopropanol, acetone, and ethyl acetate for extracting oils from avocado pulp (AP), rice bran (RB), and soybean flakes (SF), focusing on oil quality and defatted meal properties. lnγ obtained by COSMO-SAC showed tendencies for effective interactions with solutes.

View Article and Find Full Text PDF

Herein, we report the isolation and characterization of an endophytic bacterium associated with the Berberis aristata roots to uncover bioactive compounds, particularly Antimicrobials, using submerged culture. The bacterial isolate was identified via 16S rDNA sequence analysis and characterized using morphological, microscopic, and biochemical techniques. It was identified as Bacillus toyonensis strain BAR1, a motile, gram-positive, halotolerant bacterium capable of producing yellow pigments.

View Article and Find Full Text PDF

This study investigated the valorisation of seawater desalination brine (61 g L1) by cultivating the halotolerant microalga Prymnesium parvum in 10-L bubble column photobioreactors, previously acclimated to a broad salinity range (5-61 g L1). Under optimized nutrients and irradiance, brine-based cultures achieved biomass yields (1.9 gL1) comparable to seawater controls.

View Article and Find Full Text PDF

Separation of easily degradable bioactive compound of astaxanthin (AXT) from nature source with low content and several interfering carotenoid analogues is particularly challenge. Here, four mesoporous metal-organic frameworks (meso-MOFs) is reported with different pore chemistry and pore geometry of cage-type and channel-type feature for AXT adsorption and separation. The maximal adsorption capacities of AXT by cage-type PCN-777 and MIL-101-NH are higher than channel-type PCN-222 and NU-1000, and their adsorption capacities (40-469.

View Article and Find Full Text PDF

Toxicity assessment of atmospheric particulate-bound polycyclic aromatic hydrocarbons on marine phytoplankton.

Mar Pollut Bull

August 2025

Frontiers Science Center for Deep Ocean Multispheres and Earth System, and Key Laboratory of Marine Environment and Ecology, Ministry of Education of China, Ocean University of China, Qingdao, China; Laboratory for Marine Ecology and Environmental Science, Qingdao Marine Science and Technology Cente

Particulate-phase polycyclic aromatic hydrocarbons (PAHs), known for their stability and significant toxicity, can undergo long-range atmospheric transport and deposit into oceans. However, their impact on phytoplankton remains controversial. We extracted PAH-containing mixtures from aerosol particulate matter (AP-PAHs) and assessed their toxicity on coastal diatom Skeletonema costatum under environmentally relevant exposure levels (0.

View Article and Find Full Text PDF