The effect of a collar on primary stability of standard and undersized cementless hip stems: a biomechanical study.

Arch Orthop Trauma Surg

Department of Orthopaedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), University Hospital, LMU, Marchioninistraße 15, 81377, Munich, Germany.

Published: June 2024


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Introduction: Aseptic loosening and periprosthetic fractures are main reasons for revision after THA. Quite different from most other stem systems, Corail cementless hip stems show better survival rates than their cemented counterpart, which can possibly be explained by the use of a collar. The study aimed to investigate primary stability with standard and undersized hip stems both collared and collarless.

Materials And Methods: Primary stability of cementless, collared and collarless, femoral stems was measured in artificial bones using both undersized and standard size. After preconditioning, 3D micromotion was measured under cyclic loading at the bone-implant interface.

Results: The use of a collar resulted in higher micromotion within the same stem size but showed no statistically significant difference for both standard and undersized hip stems. The collared and collarless undersized stems showed no significant differences in 3D micromotion at the upper measuring positions compared to the standard stem size. Micromotion was significantly higher in the distal measuring positions, with and without collar, for the undersized stems (vs. standard collarless stem size).

Conclusion: The key finding is that the collarless and collared Corail hip stems, within one stem size, showed no significant differences in primary stability. Undersized stems showed significantly higher micromotion in the distal area both with and without collar.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11211124PMC
http://dx.doi.org/10.1007/s00402-024-05374-7DOI Listing

Publication Analysis

Top Keywords

hip stems
20
primary stability
16
standard undersized
12
stem size
12
undersized stems
12
stems
9
stability standard
8
cementless hip
8
undersized hip
8
stems collared
8

Similar Publications

Background: Patients with secondary hip osteoarthritis due to developmental dysplasia of the hip (DDH) often have abnormal femoral morphology, making stem design critical for long-term outcomes. The FMS-anatomic stem previously demonstrated favourable mid-term results. Its successor, the Anatomic Fit stem, was developed with a reduced hydroxyapatite-coated area to enhance proximal load transfer and a narrower lateral flare to facilitate insertion.

View Article and Find Full Text PDF

Recurrent femoral stem fractures in Dorr A femurs: Lessons learned and a call for alternative strategies.

World J Methodol

December 2025

Centro de Cadera ''Sir John Charnley'' Instituto de Ortopedia y Traumatologia Prof. Dr. Carlos E. Ottolenghi, Hospital Italiano de Buenos Aires, Capital Federal C1198AAW, Buenos Aires, Argentina.

We report a unique case of bilateral femoral stem fractures in a patient with Dorr A femoral morphology, underscoring the need for a critical reassessment of implant selection strategies. The initial failure involved a cemented revision stem placed using the cement-within-cement technique combined with an extended trochanteric osteotomy (ETO). A second revision was subsequently performed using a cortical window osteotomy and a distally fixed uncemented stem, which resulted in successful recovery.

View Article and Find Full Text PDF

Aims & Objectives: Collared stems have demonstrated acceptable long-term survivorship in cementless total hip arthroplasty (THA). However, their impact on early postoperative periprosthetic femoral fracture (PFF) remains unclear. This study compares early PFF rates requiring revision between collared and collarless stems in cementless THA and identifies risk factors.

View Article and Find Full Text PDF

Background And Purpose:  The new Tri-Lock bone -preserving stem with a collarless proximal-coated tapered-wedge design was compared with a classic well-proven collarless proximal-coated long and round-tapered design. Our primary aim was to compare femoral stem fixation (subsidence) of the Tri-Lock stem with the classic Summit stem, and secondarily to compare the change in periprosthetic bone mineral density (BMD) and PROMS between stem groups.

Methods:  In a patient-blinded randomized controlled trial, 52 patients at mean age 60 (SD 6) received cementless Tri-Lock (n = 26) or Summit (n = 26) femoral stems with a cementless Pinnacle cup, a cross-linked polyethylene liner, and a CoCr head.

View Article and Find Full Text PDF

Aims: Periprosthetic femoral fracture (PPFF) is a major complication following hip arthroplasty. This study examined the influence of femoral component design and fixation method on the risk of reoperation for PPFF.

Methods: We analyzed data on femoral component type use for primary hip arthroplasty stems reported to the Norwegian Arthroplasty Register and the Norwegian Hip Fracture Register from 1 January 2005 to 31 December 2023.

View Article and Find Full Text PDF