98%
921
2 minutes
20
Background: The development of materials with tailored signal intensity in MR imaging is critically important both for the reduction of signal from non-tissue hardware, as well as for the construction of tissue-mimicking phantoms. Silicone-based phantoms are becoming more popular due to their structural stability, stretchability, longer shelf life, and ease of handling, as well as for their application in dynamic imaging of physiology in motion. Moreover, silicone can be also used for the design of stretchable receive radio-frequency (RF) coils.
Purpose: Fabrication of materials with tailored signal intensity for MRI requires knowledge of precise T and T relaxation times of the materials used. In order to increase the range of possible relaxation times, silicone materials can be doped with gadolinium (Gd). In this work, we aim to systematically evaluate relaxation properties of Gd-doped silicone material at a broad range of Gd concentrations and at three clinically relevant magnetic field strengths (1.5 T, 3 T, and 7 T). We apply the findings for rendering silicone substrates of stretchable receive RF coils less visible in MRI. Moreover, we demonstrate early stage proof-of-concept applicability in tissue-mimicking phantom development.
Materials And Methods: Ten samples of pure and Gd-doped Ecoflex silicone polymer samples were prepared with various Gd volume ratios ranging from 1:5000 to 1:10, and studied using 1.5 T and 3 T clinical and 7 T preclinical scanners. T and T relaxation times of each sample were derived by fitting the data to Bloch signal intensity equations. A receive coil made from Gd-doped Ecoflex silicone polymer was fabricated and evaluated in vitro at 3 T.
Results: With the addition of a Gd-based contrast agent, it is possible to significantly change T relaxation times of Ecoflex silicone polymer (from 213 ms to 20 ms at 1.5 T; from 135 ms to 17 ms at 3 T; and from 111.4 ms to 17.2 ms at 7 T). T relaxation time is less affected by the introduction of the contrast agent (changes from 608 ms to 579 ms; from 802.5 ms to 713 ms at 3 T; from 1276 ms to 979 ms at 7 T). First results also indicate that liver, pancreas, and white matter tissues can potentially be closely mimicked using this phantom preparation technique. Gd-doping reduces the appearance of the silicone-based coil substrate during the MR scan by up to 81%.
Conclusions: Gd-based contrast agents can be effectively used to create Ecoflex silicone polymer-based phantoms with tailored T relaxation properties. The relative low cost, ease of preparation, stretchability, mechanical stability, and long shelf life of Ecoflex silicone polymer all make it a good candidate for "MR invisible" coil development and bears promise for tissue-mimicking phantom development applicability.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10272082 | PMC |
http://dx.doi.org/10.1002/mp.16255 | DOI Listing |
Materials (Basel)
June 2025
Center for High Technology Materials, The University of New Mexico, Albuquerque, NM 87106, USA.
The current study focuses on the manufacturing and characterization of various forms of Ecoflex and their composites to improve the mechanical properties and surface texture, specifically for use in wearable sensors and electronic skin applications. Various types of Ecoflex elastomers were mixed to form blended composite materials, which could be used to tune the mechanical properties. Experimental and simulation methods were conducted to understand the mechanical behavior and material properties of the manufactured samples under large deformation (1200% strain) by various dynamic loading conditions.
View Article and Find Full Text PDFACS Appl Mater Interfaces
July 2025
School of Engineering, University of Warwick, Coventry CV4 7AL, U.K.
The development of flexible strain sensors has evolved significantly in recent years, with research priorities progressively shifting toward fabrication accessibility, performance optimization, and functional versatility to address increasingly complex application requirements in ambient intelligence and human-machine interface technologies. For human biomechanical and physiological monitoring applications, environmental robustness represents a critical design consideration, as sensors must maintain consistent performance characteristics despite exposure to thermal fluctuations, varying humidity levels, and potential liquid immersion during perspiration or aquatic activities. This work addresses these challenges through the implementation of a hierarchical nanocomposite sensing architecture incorporating three kinds of carbon allotropes─carbon black, graphene, and multiwalled carbon nanotubes─to form a strain-responsive conductive network.
View Article and Find Full Text PDFAnnu Int Conf IEEE Eng Med Biol Soc
July 2024
Low Urinary Tract Dysfunctions (LUTD) and in particular Urinary Incontinence (UI) is a medical condition affecting millions of people worldwide. In this context researchers and engineers performed tests on porcine and human urethras. However, ethical concerns and limited human tissue availability make direct testing on human urethras complicated.
View Article and Find Full Text PDFLangmuir
January 2025
Henan Province Engineering Technology Research Center of MEMS Manufacturing and Applications, School of Mechanics and Safety Engineering, Zhengzhou University, Zhengzhou 450001, China.
The rapid development of wearable technology, flexible electronics, and human-machine interaction has brought about revolutionary changes to the fields of motion analysis and physiological monitoring. Sensors for detecting human motion and physiological signals have become a hot topic of current research. Inspired by the muscle fiber structure, this paper proposed a highly stable strain sensor that was composed of stretchable Spandex fibers (SPF), multiwalled carbon nanotubes (MWCNTs), and silicone rubber (Ecoflex).
View Article and Find Full Text PDFSci Rep
October 2024
Center for Remote Health Technologies and Systems, Texas A&M Engineering Experiment Station, College Station, TX, 77843, USA.
Intravenous (IV) catheter-related bloodstream infections (CRBSIs) cause significant risks in healthcare, necessitating advancements in catheter design and materials. This study investigates the effectiveness of Ecoflex, a silicone-based material, in studying CRBSIs through the development of skin-like replicas that mimic human skin properties for use in wearable sensing devices. We characterized the replica's bioinspired surface roughness, wettability, bacterial adhesion, and mechanical properties and validated its performance using in vitro IV simulation.
View Article and Find Full Text PDF