98%
921
2 minutes
20
Subsurface contamination is a frequent occurrence in fractured porous systems, posing a potential threat for the groundwater contamination. Tracking the movement of these contaminants is an inherent aspect of effective remediation strategy. The non-isothermal conditions prevailing in the subsurface environment further add to the complexity of the existing scenario. The current study focuses on simulating the concentration profiles of nitrogen species in a fracture-matrix system under non-isothermal conditions. The kinetics and biochemical thermodynamics of nitrogen transformation reactions were explicitly modelled in this study by adopting a finite differential numerical scheme. The numerical results clearly depicted the spatial-temporal profiles of the concentration of all the species in response to the observed peak values. Considering the sensitivity of the model parameters, an increase in flow velocity triggered the migration of all nitrogen species in the fracture, while an increase in matrix porosity reduced the concentration by enhancing the chemical reactions. An increase in fracture aperture also could trigger the denitrification process in the fracture to reduce the nitrate-nitrogen contamination in the fracture. The temperature variation between 25 °C and 45 °C in the fracture and the matrix essentially reduced the availability of nitrate-nitrogen and nitrogen gas in the fracture under non-isothermal conditions. Hence, an increase in the temperature coefficient can reduce the spike of nitrate-nitrogen and nitrogen gas in fracture by minimizing such transformation rates.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s11356-021-15691-8 | DOI Listing |
J Thermoplast Compos Mater
August 2025
Institute for Applied Materials - Microstructure Modeling and Simulation, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany.
In this paper, we introduce a coarse-grained model of polymer crystallization using a multiphase-field approach. The model combines a multiphase-field method, Nakamura's kinetic equation, and the equation of heat conduction for studying microstructural evolution of crystallization under isothermal and non-isothermal conditions. The multiphase-field method provides flexibility in adding any number of phases with different properties making the model effective in studying blends or composite materials.
View Article and Find Full Text PDFPolymers (Basel)
August 2025
Department of Chemical Engineering, Faculty of Engineering, Bilecik Şeyh Edebali University, 11230 Bilecik, Turkey.
Thermogravimetric analysis (TGA) is a key technique for evaluating the kinetics and thermodynamics of thermal degradation, providing essential data for material assessment and system design. When coupled with Fourier-transform infrared (FT-IR) spectroscopy or mass spectroscopy (MS), it enables the identification of evolved gases and correlates mass loss with specific chemical species, offering detailed insight into decomposition mechanisms. In this study, TGA was coupled with FT-IR and MS to investigate the thermal degradation behavior of Bakelite, with the aim of evaluating its kinetic and thermodynamic parameters under non-isothermal conditions, identifying evolved volatile compounds, and elucidating the degradation process.
View Article and Find Full Text PDFJ Food Sci
August 2025
Faculty of Core Research, Ochanomizu University, Bunkyo-ku, Tokyo, Japan.
Leafy vegetables have cuticle layers that hinder mass transfer. Although leafy vegetables are frequently heated with NaCl, the mass transfer difference between their cut and uncut surfaces during cooking remains uninvestigated. To simulate the NaCl concentration changes during the cooking of leafy vegetables, this study clarifies the difference between the mass transfer processes in cut and uncut surfaces of Chinese cabbage.
View Article and Find Full Text PDFPolymers (Basel)
July 2025
Department of Chemistry, University of Alabama at Birmingham, 901 S. 14th Street, Birmingham, AL 35294, USA.
Non-isothermal calorimetry is performed to study the kinetics of metal-free A/B-type azide-alkyne polyaddition between the dipropargyl ether of bisphenol A with different organic diazides. The diazide structure is varied to probe the effect of the nature of a hydrocarbon spacer between the azide groups on their reactivity. Isoconversional analysis demonstrates that the polymerization processes are characterized by the same activation energy of 84 kJ mol for all studied diazides.
View Article and Find Full Text PDFNanoscale
August 2025
Department of Physics, Southern Federal University, 344090 Rostov-on-Don, Russia.
Pt nanoparticles supported onto carbon black were synthesized the non-isothermal decomposition of platinum acetylacetonate. The Pt loading of the as-synthesised Pt/C varied within the range of 10%-25%. Based on the refinement of X-ray patterns using the Rietveld method, it was shown that the average size of Pt nanocrystallites increased in the range of 1.
View Article and Find Full Text PDF