Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Resin-ceramic hybrid materials for computer-aided design/computer-aided manufacturing (CAD/CAM resins) have been developed. In this study, the effects of the amount of light energy transmitted through the four types of 1.5-mm-thick CAD/CAM resin blocks on the bond performance of corresponding resin cement adhesive systems consisting of an adhesive and a dual-curable resin cement were examined. The bond strengths of the four types of resin cement adhesive systems decreased with decreasing the amount of light energy transmitted through CAD/CAM resin block, due to a decrease in the light-curable ability of dual-curable resin cements. However, the degradation behavior of the bond strengths was strongly affected by the types of adhesives and initiator systems utilized. The adhesive consisting of a dimethacrylate monomer and redox-initiators enhanced the bonding performance of the dual-curable resin cement more effectively than the adhesive, which consists of a dimethacrylate monomer and photo-initiators or a γ-me thacryloxypropyltrimethoxysilane and a 10-methacryloyloxydecyl dihydrogen phosphate.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.4012/dmj.2019-145 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The Effect of Hydrogen Peroxide With Different Concentration on the Color and Surface Microhardness of the Resin Bracket.
Clin Exp Dent Res
October 2025
Department of Dental Hygiene, Konyang University, Daejeon, Republic of Korea.
Objectives: This study aimed to evaluate the whitening effect, shear bond strength (SBS), microhardness, and microstructure of discolored resin brackets following whitening treatment with various concentrations of hydrogen peroxide (HP).
Material And Methods: Resin brackets were bonded to the enamel surface and discolored with a curry solution. Control (distilled water; DW) and experimental solutions of 8.
Managing root caries with silver diamine fluoride, sodium fluoride and direct restorations: A cost-effectiveness analysis.
J Dent
September 2025
Faculty of Dentistry, National University of Singapore, Singapore; Saw Swee Hock School of Public Health, National University of Singapore, Singapore.
Objective: To assess the cost-effectiveness of silver diamine fluoride (SDF) relative to sodium fluoride (NaF) and traditional resin-modified glass ionomer cements (RMGIC) restorations for the management of root caries in older adults aged 60 and above.
Methods: A Markov model design was chosen and two models were constructed: 1) Clinic-based model - with access to dental facility that allows for placement of traditional restorations, 2) Community-based model - without access to dental facility due to mobility, lack of executive function, or financial barriers. Modelling was done over a 10-year time horizon with a cycle length of one year.
Effectiveness of PEEK ultrasonic tips and cement types on residual cement around implant-supported restorations.
Br Dent J
September 2025
Professor, Istanbul Medipol University Faculty of Dentistry, Department of Prosthodontics Dentistry, İstanbul, Turkey.
Purpose The aim of this study was to assess the effectiveness of a PEEK (polyether-ether-ketone) ultrasonic tip in the cleaning around implant-supported restorations and to evaluate the effect of different cement types on the amount of residual cement at the restoration margins.Materials and methods A master model with an implant analogue placed in the upper left first premolar region was used to create 72 cast models and zirconia crowns were fabricated for each model. A total of 72 zirconia crowns were divided into two main groups based on the cleaning method applied after cementation.
View Article and Find Full Text PDFDoes the use of different root canal sealers and adhesive resin cements impact the bond strength of glass fiber posts?
Restor Dent Endod
August 2025
Department of Endodontics, School of Dentistry, Grande Rio University (UNIGRANRIO), Rio de Janeiro, RJ, Brazil.
Objectives: This study aimed to assess the influence of two endodontic sealers on the bond strength of glass fiber posts using conventional and self-adhesive resin cement through a push-out test.
Methods: Forty central human incisors were randomly divided into four groups (n = 10) based on sealer (epoxy resin- based or calcium silicate-based) and cement (conventional and self-adhesive resin) types: AH Plus (Dentsply De- Trey)/RelyX ARC (3M ESPE), AH Plus/RelyX U200 (3M ESPE), Bio-C Sealer (Angelus)/RelyX ARC, and Bio-C Sealer/RelyX U200. After canal filling and post cementation, roots were sectioned to obtain one specimen per root third.
Internal and marginal fit of digitally fabricated all-ceramic crowns with auxiliary retentive features on short clinical abutments: a micro-CT study.
PeerJ
September 2025
Department of Dental Research Cell, Dr. D. Y. Patil Dental College and Hospital, Pune, Maharashtra, India.
Background: Short clinical crowns/abutments (SCC) pose a challenge in achieving adequate retention. Auxiliary retentive features (ARF), such as grooves, are commonly employed to enhance retention. The marginal gap (MG) and internal fit (IF) of restorations are critical factors influencing clinical success.
View Article and Find Full Text PDF