Spent Coffee Grounds in the Production of Lightweight Clay Ceramic Aggregates in View of Urban and Agricultural Sustainable Development.

This paper presents an innovative application for spent coffee grounds (SCGs) used as filler for the formulation of lightweight clay ceramic aggregates (LWA). LWA can be used for urban and agricultural purposes as a sustainable solution. Spent coffee grounds were tested as a pore forming agent partially acting as a replacement for red clay in material formulation before firing. Substitutions of 10, 15, and 20 wt.% of red clay were tested. The properties of lightweight aggregates with 15 wt.% of SCGs were improved using a specifically tailored fertilizer glass due to its low pH and conductivity within the soil tolerance range. Packaging glassy sand, cattle-bone flour ash, and potassium carbonate were mixed and melted in order to obtain this glass, which when added to the clayey batch functionalized the aggregates by phosphorus and potassium nutrients. The results (in particular, porosity and bulk density) show that the lightweight aggregates obtained have interesting properties for possible uses both in urban (e.g., green roofs as a drainage layer) and agricultural purposes. Moreover, pH and conductivity are in line with the Italian Standard regarding soil amendment (D.lgs. 75/2010). In addition, several leaching tests were performed in a solution containing 2 vol.% citric acid (CHO) to evaluate the release capacity not only of nutrients (P and K) but also to check the presence and release of heavy metals, such as lead (Pb), that may come from the glassy precursor. The results obtained showed that nutrients are efficiently released in 21 days (P = 87.73% and K = 25.74% of released percentage) and Pb release is under the standard threshold of 30 ppm.