Supracrestal implant placement improves peri-implant health in T2DM patients: A randomized clinical trial.

Objective: This study, designed as a randomized controlled trial, investigated how the vertical placement of implants influences peri‑implant conditions in patients with type 2 diabetes mellitus (T2DM) treated with mandibular overdentures.

Material And Methods: Twenty-two edentulous individuals with T2DM received two implants each in the anterior mandible following a split-mouth design: one placed at the crestal level (CL) and the other at a supracrestal level (SL). Clinical, immunoenzymatic, and tomographic assessments were conducted at prosthesis placement (baseline) and after 6, 12, and 24 months.

Mussel-inspired remineralizing agent: effects on morphology and permeability of dentin after erosion and abrasion cycling protocol.

Objective: This study aimed to evaluate the effects on morphology and permeability of dentin after an erosive and abrasive cycling protocol followed by treatment with an experimental solution containing dopamine.

Materials And Methods: Dentin hypersensitivity was simulated in human dentin discs by applying EDTA for 5 min. After assessing maximum dentin permeability (initial), specimens were randomly allocated into four groups: distilled water (control), NaF 0.

Clinicopathological Analysis of Oral Paracoccidioidomycosis in Women.

Unlabelled: Paracoccidioidomycosis (PCM) is a deep systemic mycosis caused by Paracoccidioides brasiliensis. PCM affects predominantly men in their fifth and sixth decades of life, with low prevalence in women. The reasons for this discrepancy are not fully understood, but oestrogen may influence the transformation of the fungus and modulate the immune response.

Effect of high irradiance and short exposure times on the depth of cure of six bulk-fill resin composites.

This study examined the effect of high irradiance and short exposure times on the depth of cure of six resin-based composites (RBCs). Bluephase PowerCure and the Valo X light-curing units (LCUs) were used to photocure bulk-fill RBCs for their recommended exposure times: Admira Fusion x-tra (AFX/20s), Aura Bulk Fill (ABF/20s), Filtek One Bulk Fill (FOB/20s), Opus Bulk Fill APS (OBF/30s), Tetric EvoCeram Bulk Fill (TEC/10s) and Tetric PowerFill (TPF/10s). In addition, all bulk-fill RBCs were tested for depth of cure with one short 3 s exposure time from the Bluephase PowerCure or the Valo X in the Xtra Power mode.

Ultraviolet C as a method of disinfecting medical silicone used in facial prostheses: An in vitro study - Part 2.

Statement Of Problem: Disinfection is an important factor in preserving facial prostheses and maintaining tissue health. However, whether disinfection with ultraviolet C is an effective disinfection method is unclear.

Purpose: The purpose of this in vitro study was to evaluate the effectiveness of irradiation with different exposure durations of an ultraviolet-C light-emitting diode in the disinfection of the silicone (A-588-1; Factor II) used in facial prostheses.

Factors associated with the proportion of abnormal results in screening mammograms: ecological study.

Objective: To analyze the factors associated with the proportion of abnormal results in screening mammograms.

Methods: Ecological study, with data from DATASUS/SISCAN, Atlas Brasil do Desenvolvimento Humano, Fundação SEADE, and Sistema e-Gestor, from 2016 to 2019, of women aged 50 to 69 years in the 645 municipalities of São Paulo (Brazil). Independent variables were associated with the outcome: proportion of unsatisfactory coverage of abnormal test results (Breast Imaging Reporting and Data System - BI-RADS® 0, 4 and 5 proportion >10% of tests performed).

Influence of alveolar bone height on the biomechanical behavior of roots restored with custom-made posts-and-cores.

Objetive: This study evaluated the influence of alveolar bone height and post type on compressive force resistance, fracture pattern, and stress distribution in endodontically treated teeth.

Materials And Methods: Bovine roots were endodontically treated and divided into eight groups (n = 10) according to alveolar bone height (normal alveolar bone and alveolar bone loss - 2 and 5 mm from the margin of the crown, respectively) and post type (prefabricated glass fiber post, anatomic glass fiber post, customized milled glass fiber post-and-core and customized milled polyetheretherketone (PEEK) post-and-core). Mechanical fatigue was simulated (300.

Effects of gastric acid and mechanical toothbrushing in CAD-CAM restorative materials: Mechanical properties, surface topography, and biofilm adhesion.

Objective: To evaluate the effects of simulated gastric acid erosion combined with mechanical toothbrushing abrasion on the mechanical properties, surface topography, and biofilm adhesion of different CAD/CAM materials.

Material And Methods: Specimens of zirconia-reinforced lithium silicate glass-ceramic (ZLS), polymer-infiltrated ceramic network (PICN), feldspathic glass-ceramic (FE), and two nanoceramic resins (RK, RG), were submitted to the following challenges: erosion (E), abrasion (A), erosion combined with abrasion (E + A), or remained untreated (control - C). After challenges, flexural strength was evaluated, while microhardness (KHN) and surface roughness (Ra) were tested before and after treatments.

Impact of neuroinflammation on epigenetic transcriptional control of Sonic Hedgehog members in the central nervous system.

Sonic Hedgehog (Shh) signaling plays a critical role during central nervous system (CNS) development, and its dysregulation leads to neurological disorders. Nevertheless, little is known about Shh signaling regulation in the adult brain. Here, we investigated the contribution of DNA methylation on the transcriptional control of Shh signaling pathway members and its basal distribution impact on the brain, as well as its modulation by inflammation.

Comparative Evaluation of Bulk-Fill Composite Resins: Knoop Microhardness, Diametral Tensile Strength and Degree of Conversion.

Purpose: Bulk-fill composite resins were developed to reduce time and facilitate the restorative procedure. However, considering their recent introduction on the market and the new formulations, their performance still requires evaluation. This study aimed to evaluate Knoop microhardness (KHN), diametral tensile strength (DTS) and degree of conversion (DC) of three Bulk-Fill composite resins and a conventional one.

PEEK and fiberglass intra-radicular posts: influence of resin cement and mechanical cycling on push-out bond strength.

Objectives: To evaluate the bond strength of four types of posts (pre-fabricated fiberglass post, fiberglass post anatomized with composite resin, milled fiberglass post, and milled polyetheretherketone (PEEK) post), and two types of resin cements (conventional and self-adhesive) by assessing immediate bond strength and post-mechanical aging at each root third.

Materials And Methods: Bovine endodontically treated roots (16 groups, n = 8) were prepared and the posts were produced and luted; the specimens of aging groups were cycled (300,000 cycles under 50 N load at 1.2 Hz frequency); six slices of each root were obtained; push-out test was performed by using a universal testing machine (500 N load at 1 mm/min cross speed); fracture pattern was classified into five levels.

TiO2 nanotube-containing glass ionomer cements display reduced aluminum release rates.

Titanium dioxide nanotubes (TiO2-nts) were incorporated into a glass ionomer cement (GIC) with improved mechanical properties and antibacterial activity. The aims of the present in vitro study were to define the elemental characterization, aluminum (Al) release rate, and initial working time for GIC reinforced with TiO2-nts, in an experimental caries model. TiO2-nts were incorporated into GIC powder components at 5% by weight, and compared with unblended GIC.

Influence of Adhesion Promoter Primers on Polymerization Kinetics and Long-term Bond Strength of Composite Cements to Zirconia.

Purpose: To investigate the influence of primers on polymerization kinetics of resin-based luting and its effect on the microhardness and bond strength to zirconia. Materials and Methods: Panavia V5 (PV; Kuraray Noritake) with Tooth Primer (TPprimer; Kuraray Noritake) or Clearfil Ceramic Primer (CPprimer; Kuraray Noritake), and RelyX Ultimate (RU; 3M Oral Care) with Scotchbond Universal (SUadhesive; 3M Oral Care) were evaluated. Polymerization kinetics of luting materials with or without primers (TPprimer or SUadhesive) were evaluated using Fourier transform near-infrared (FT-NIR) spectroscopy in self- and dual-curing modes (n = 5).

Prevalence of dental trauma in Brazilian children and adolescents: a systematic review and meta-analysis.

This study aimed to investigate the prevalence of dental trauma in Brazilian children and adolescents. A systematic review was conducted considering eight databases: MEDLINE (via PubMed), LILACS, BBO, Scopus, Embase, Web of Science, Open Access Theses and Dissertations, and OpenThesis. Only prevalence studies that used a probabilistic sampling method were included, without restriction on year or language of publication.

Antibacterial efficacy of non-thermal atmospheric plasma against Streptococcus mutans biofilm grown on the surfaces of restorative resin composites.

The aim of this study was to evaluate the antimicrobial efficacy of non-thermal atmospheric plasma (NTAP) against Streptococcus mutans biofilms. Resin discs were fabricated, wet-polished, UV sterilized, and immersed in water for monomer extraction (37 °C, 24 h). Biofilms of bioluminescent S.

Ultraviolet C as a method of disinfecting medical silicone used in facial prostheses: An in vitro study.

Statement Of Problem: Hygiene and disinfection are important factors for preserving facial prostheses and supporting tissue health. However, a method that does not accelerate degradation or color change is necessary.

Purpose: The purpose of this in vitro study was to evaluate the effectiveness of irradiation with ultraviolet C light-emitting diode (UV-C LED) light in the disinfection and initial color stability of the silicone (A-588-1; Factor II) used in facial prostheses.

The association of inadequate lip coverage and malocclusion with dental trauma in Brazilian children and adolescents - A systematic review and meta-analysis.

Background/aim: Dental trauma (DT) occurs frequently in children and adolescents. Therefore, understanding the factors associated with its occurrence in these age groups is important to establish specific preventive measures. The aim of this study was to investigate the relationships of lip coverage, overjet, and open bite to dental trauma in Brazilian children and adolescents.

Flexural strength and microhardness of bulk-fill restorative materials.

Background: Bulk-fill materials can facilitate the restorative procedure mainly for deep and wide posterior cavities. The purpose of this study was to evaluate flexural strength (biaxial flexural strength [BFS]) and microhardness (Knoop microhardness [KHN]) at different depths of bulk-fill materials.

Methods: Five bulk-fill materials were tested: two light-curable composite resins, one dual-cure composite, one bioactive restorative, and a high-viscosity glass ionomer.

TiO nanotubes improve physico-mechanical properties of glass ionomer cement.

Objectives: The aim of this study was to determine the physico-mechanical properties of a high viscosity glass ionomer cement (GIC) reinforced with TiO nanotubes (TiO-nt).

Methods: TiO-nt was incorporated into the GIC powder components (Ketac Molar EasyMix™) in concentrations of 0% (control group), 3%, 5%, 7% by weight. Compressive strength (n = 10/group), three point bending for flexural strength (n = 18/group), microshear bond strength to dentin and failure mode (n = 20/group), and surface roughness and weight loss before and after brushing simulation (30,000 cycles) (n = 8/group) were evaluated.

A 10-Year Follow-Up of Different Intra-Radicular Retainers in Teeth Restored with Zirconia Crowns.

Purpose: To evaluate the survival rate in restored teeth with three different types of retainers prior to the fixing of crowns with zirconia through this retrospective clinical study. It is unclear how the type of post and core rehabilitation, and type of resin cement affect the longevity of teeth restored with crowns.

Methods: In a private clinic, a total of 101 retainers installed by the same professional between June 2008 and January 2018, with an average time of 58.

Triclosan-containing fluoride toothpaste on clinical parameters and osteo-inflammatory mediators when applied in a stent during experimental peri-implant mucositis in smokers.

Objectives: To determine the effect of triclosan-containing fluoride toothpaste on the clinical parameters and the osteo-immunoinflammatory mediators in the peri-implant fluid when applied in a stent during experimental peri-implant mucositis in smokers.

Materials And Methods: Twenty-six smokers with an implant-supported crown were enrolled in this double-blind, randomized, crossover study. During the two 3-week periods without mechanical toothbrushing (washout period: 30 days), patients were randomly assigned to triclosan/fluoride (n:13) or fluoride toothpaste (n:13), three times/day.

Oral Cancer Knowledge Assessment: Newly Graduated versus Senior Dental Clinicians.

The present study assessed the level of dentists' knowledge regarding oral cancer in the city of São Paulo, Brazil. A questionnaire was used to compare the level of knowledge among newly graduated and senior clinicians. A total of 20,154 e-mails were correctly delivered to the dentists registered in the database of the Regional Dentistry Council of São Paulo, and 477 (2.

Novel Nanotechnology of TiO Improves Physical-Chemical and Biological Properties of Glass Ionomer Cement.

The aim of this study was to assess the performance of glass ionomer cement (GIC) added with TiO nanotubes. TiO nanotubes [3%, 5%, and 7% (w/w)] were incorporated into GIC's (Ketac Molar EasyMix™) powder component, whereas unblended powder was used as control. Physical-chemical-biological analysis included energy dispersive spectroscopy (EDS), surface roughness (SR), Knoop hardness (SH), fluoride-releasing analysis, cytotoxicity, cell morphology, and extracellular matrix (ECM) composition.

Diagnosis and esthetic functional rehabilitation of a patient with amelogenesis imperfecta.

Amelogenesis imperfecta is a hereditary disease that causes structural anomalies in dental enamel of both the primary and permanent dentition. The anomaly may present a variety of clinical forms and appearances, with its main characteristics being the loss of tooth structure, compromised esthetic appearance, and dental sensitivity. The aim of this study was to present the clinical report of a 16-year-old patient with severely compromised esthetics as a result of amelogenesis imperfecta of the hypocalcified type who was rehabilitated with composite resin and ceramic crowns.