Microstructural Effect on the Enhancement of Field Electron Emission Properties of Nanocrystalline Diamond Films by Li-Ion Implantation and Annealing Processes.

The impact of lithium-ion implantation and postannealing processes on improving the electrical conductivity and field electron emission (FEE) characteristics of nitrogen-doped nanocrystalline diamond (nNCD) films was observed to be distinctly different from those of undoped NCD (uNCD) films. A high-dose Li-ion implantation induced the formation of electron trap centers inside the diamond grains and amorphous carbon (a-C) phases in grain boundaries for both types of NCD films. Postannealing at 1000 °C healed the defects, eliminated the electron trap centers, and converted the a-C into nanographitic phases.

Nanoscale investigation of enhanced electron field emission for silver ion implanted/post-annealed ultrananocrystalline diamond films.

Silver (Ag) ions are implanted in ultrananocrystalline diamond (UNCD) films to enhance the electron field emission (EFE) properties, resulting in low turn-on field of 8.5 V/μm with high EFE current density of 6.2 mA/cm (at an applied field of 20.

Gold nanoparticle-ultrananocrystalline diamond hybrid structured materials for high-performance optoelectronic device applications.

Hybridization of gold nanoparticles in the ultrananocrystalline diamond materials improves the electrical conductivity of the materials to a high level of 230 (Ω cm)(-1) with a sheet carrier concentration of 8.9 × 10(20) cm(-2). These hybrid materials show enhanced electron field emission (EFE) properties, viz.

Enhanced electron field emission properties of conducting ultrananocrystalline diamond films after Cu and Au ion implantation.

The effects of Cu and Au ion implantation on the structural and electron field emission (EFE) properties of ultrananocrystalline diamond (UNCD) films were investigated. High electrical conductivity of 186 (Ω•cm)(-1) and enhanced EFE properties with low turn-on field of 4.5 V/μm and high EFE current density of 6.

Structural and electrical properties of conducting diamond nanowires.

Conducting diamond nanowires (DNWs) films have been synthesized by N₂-based microwave plasma enhanced chemical vapor deposition. The incorporation of nitrogen into DNWs films is examined by C 1s X-ray photoemission spectroscopy and morphology of DNWs is discerned using field-emission scanning electron microscopy and transmission electron microscopy (TEM). The electron diffraction pattern, the visible-Raman spectroscopy, and the near-edge X-ray absorption fine structure spectroscopy display the coexistence of sp³ diamond and sp² graphitic phases in DNWs films.

Engineering the interface characteristics of ultrananocrystalline diamond films grown on Au-coated Si substrates.

Enhanced electron field emission (EFE) properties have been observed for ultrananocrystalline diamond (UNCD) films grown on Au-coated Si (UNCD/Au-Si) substrates. The EFE properties of UNCD/Au-Si could be turned on at a low field of 8.9 V/μm, attaining EFE current density of 4.