Thermal Softening Measurements of Refractory High-Entropy Alloys.

Home-built equipment will be presented able to measure the thermal expansion (with a flat indenter) and indentation depth (with a pointed indenter) up to 1100 °C. In dilatometer mode, the allotropic phase transformations can be studied. For hardness, a Rockwell-type measurement is adopted.

Low-Temperature Superplasticity of Ultrafine-Grained Aluminum Alloys: Recent Discoveries and Innovative Potential.

The last two decades have witnessed significant progress in the development of severe plastic deformation techniques to produce ultrafine-grained materials with new and superior properties. This review examines works and achievements related to the low-temperature superplasticity of ultrafine-grained aluminum alloys. The examples are provided of the possibility to observe low-temperature superplasticity in aluminum alloys at temperatures less than 0.

Prediction of the Cohesion Energy, Shear Modulus and Hardness of Single-Phase Metals and High-Entropy Alloys.

In order to facilitate the prediction of some physical properties, we propose several simple formulas based on two parameters only, the metallic valence and metallic atomic radii. Knowing the composition, for single-phase alloys, the average parameters can be calculated by the rule of mixture. The input parameters can be obtained from tabulated databases.

Microstructure Evolution during High-Pressure Torsion in a 7xxx AlZnMgZr Alloy.

A homogenized, supersaturated AlZnMgZr alloy was processed via severe plastic deformation (SPD) using a high-pressure torsion (HPT) technique for different revolutions at room temperature to obtain an ultrafine-grained (UFG) microstructure. The microstructure and mechanical properties of the UFG samples were then studied using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and tensile and hardness measurements. The main purpose was to study the effect of shear strain on the evolution of the microstructure of the investigated alloy.

Effect of the Equal Channel Angular Pressing on the Microstructure and Phase Composition of a 7xxx Series Al-Zn-Mg-Zr Alloy.

A supersaturated Al-4.8%Zn-1.2%Mg-0.

Review on High-Throughput Micro-Combinatorial Characterization of Binary and Ternary Layers towards Databases.

The novel, single-sample concept combinatorial method, the so-called micro-combinatory technique, has been shown to be suitable for the high-throughput and complex characterization of multicomponent thin films over an entire composition range. This review focuses on recent results regarding the characteristics of different binary and ternary films prepared by direct current (DC) and radiofrequency (RF) sputtering using the micro-combinatorial technique. In addition to the 3 mm diameter TEM grid used for microstructural analysis, by scaling up the substrate size to 10 × 25 mm, this novel approach has allowed for a comprehensive study of the properties of the materials as a function of their composition, which has been determined via transmission electron microscopy (TEM), scanning electron microscopy (SEM), Rutherford backscattering spectrometry (RBS), X-ray diffraction analysis (XRD), atomic force microscopy (AFM), spectroscopic ellipsometry, and nanoindentation studies.

Estimation of Shear Modulus and Hardness of High-Entropy Alloys Made from Early Transition Metals Based on Bonding Parameters.

The relationship between the tendencies towards rigidity (measured by shear modulus, ) and hardness (measured by Vickers hardness, ) of early transition metal (ETM)-based refractory high-entropy alloys (RHEA) and bond parameters (i.e., valence electron concentration (), enthalpy of mixing (Δ)) was investigated.

A Sequence of Phase Transformations and Phases in NiCoFeCrGa High Entropy Alloy.

The present investigation is directed to phase transitions in the equimolar NiCoFeCrGa high entropy alloy, which is a mixture of face-centered cubic (FCC) and body-centered cubic (BCC) crystalline phases. The microstructure of the samples was investigated by using scanning electron microscopy (SEM), time-of-flight secondary ion mass spectroscopy (TOF-SIMS), transmission electron microscopy-based energy-dispersive spectroscopy (EDS) and electron energy loss spectroscopy (EELS), as well as X-ray diffraction (XRD) measurements. Based on the phases observed in different temperature ranges, a sequence of the phase transitions can be established, showing that in a realistic process, when freely cooling the sample with the furnace from high to room temperature, a microstructure having spinodal-like decomposition can also be expected.

Extended Applications of the Depth-Sensing Indentation Method.

The depth-sensing indentation method has been applied for almost 30 years. In this review, a survey of several extended applications developed during the last three decades is provided. In depth-sensing indentation measurements, the load and penetration depth data are detected as a function of time, in most cases at controlled loading rates.

Temperature dependent structural variations of OH(-)(H2O)n, n = 4-7: effects on vibrational and photoelectron spectra.

In this work, we identified a large number of structurally distinct isomers of midsized deprotonated water clusters, OH(-)(H2O)n=4-7, using first-principles methods. The temperature dependence of the structural variation in the solvation shell of OH(-) for these clusters was examined under the harmonic superposition approximation. We simulated the vibrational and photoelectron spectra based on these thermodynamic calculations.

Comprehensive analysis on the structure and proton switch in H+ (CH3OH)m(H2O)n (m + n = 5 and 6).

Theoretical and experimental methods were integrated to investigate the structures of H(+)(CH(3)OH)(m)(H(2)O)(n) clusters for m + n = 5 and 6. An effective theoretical approach is presented to search for extensive sets of structural isomers using an empirical model and substitution schemes. Stable isomers were then reoptimized by the B3LYP level of computations with the 6-31+G* basis set.

A Hierarchical Approach to Study the Thermal Behavior of Protonated Water Clusters H(+)(H2O)n.

The energy landscape of protonated water clusters H(+)(H2O)n is thoroughly explored at the first-principle level using a hierarchical search methodology. In particular, the distinct configurational isomers of OSS2 empirical potential for n = 5-9 are uncovered and archived systematically using an asynchronous genetic algorithm and are subsequently refined with first-principle calculations. Using the OSS2 model, quantitative agreements in the thermal properties between Monte Carlo and harmonic superposition approximation (HSA) highlighted the reliability of the latter approach for the study of small- to medium-sized protonated water clusters.

Guiding change: provider voices in youth pre-abortion counselling in urban Vietnam.

Pre-abortion counselling has a role in promoting safe sex practices and in preventing repeated unplanned pregnancies and repeated abortions among abortion-seeking women. Such counselling is essential in Vietnam, especially given the common use of abortion. Arguably, in Ho Chi Minh City, Vietnam, the delivery of pre-abortion counselling is more urgent for young women, who have historically been ignored by State reproductive health initiatives and are increasingly exposed to transmission of sexually transmitted infections (STIs), unplanned pregnancies and abortion.

Multiscale approach to explore the potential energy surface of water clusters (H2O)nn

We propose a multiscale method to explore the energy landscape of water clusters. An asynchronous genetic algorithm is employed to explore the potential energy surface (PES) of OSS2 and TTM2.1-F models.

Theoretical study of the structural and electronic properties of SimGen and SimGen- (s = m + n

Ground-state structures, vibrational frequencies, HOMO-LUMO energy gap, electron affinities, and cluster mixing energy of binary semiconductor clusters SimGen in the range s = m + n View Article and Find Full Text PDF