Effect of the Extraction Methods on the Physicochemical Characteristics of Collagen Derived from Tilapia () Skin.

Collagen from the skin of (Tilapia; TS) has gained visibility due to its extraction from waste materials from slaughterhouses, reducing environmental impacts, and because it is biodegradable, biocompatible, and nontoxic. The aim of this work was to evaluate the impact of two extraction methods on the physicochemical characteristics of collagen from TS for pharmaceutical and biomedical applications. The obtained TS was analyzed for its proximate composition.

Thermoresponsive engineered emulsions stabilised with branched copolymer surfactants for nasal drug delivery of molecular therapeutics.

Novel branched copolymer surfactants (BCS) allow the formation of oil-in-water emulsions that exhibit a temperature-induced liquid-to-gel transition. If the temperature of this transition is between room and body temperature (ca 25 and 37 °C, respectively), then the emulsions form a gel in situ upon contact with the body. A major advantage of this in situ gelation is the potential to manipulate the materials at room temperature in the low viscosity liquid state, then administer them to the body to initiate a switch to a retentive gel state, which could be used to deliver drugs to challenging sites such as the nasal mucosa.

Stimuli-Responsive Polymers for Engineered Emulsions.

Emulsions are complex. Dispersing two immiscible phases, thus expanding an interface, requires effort to achieve and the resultant dispersion is thermodynamically unstable, driving the system toward coalescence. Furthermore, physical instabilities, including creaming, arise due to presence of dispersed droplets of different densities to a continuous phase.

Branched copolymer surfactants impart thermoreversible gelation to LAPONITE® gels.

This investigation seeks to integrate LAPONITE® clay gels with thermoresponsive branched copolymer surfactants (BCSs) to develop advanced functional materials with temperature-induced sol-gel behaviour. It is known that a diverse range of molecules adsorb strongly to clays which may be used to control liberation of the species in healthcare applications, and as such the development of polymer/clay hybrid materials which can add function to the native clay behaviour are of great interest. BCS were synthesised with a structure that encompasses poly(ethylene glycol)methacrylate (PEGMA), ethylene glycol dimethacrylate (EGDMA), and dodecanethiol (DDT), conferring versatile and tuneable thermoresponsive attributes.

Supramolecular chemistry enables vat photopolymerization 3D printing of novel water-soluble tablets.

Vat photopolymerization has garnered interest from pharmaceutical researchers for the fabrication of personalised medicines, especially for drugs that require high precision dosing or are heat labile. However, the 3D printed structures created thus far have been insoluble, limiting printable dosage forms to sustained-release systems or drug-eluting medical devices which do not require dissolution of the printed matrix. Resins that produce water-soluble structures will enable more versatile drug release profiles and expand potential applications.

A drug-incorporated-microparticle-eggshell-membrane-scaffold (DIMES) dressing: A novel biomaterial for localised wound regeneration.

Chronic wounds affect millions of people annually and have emotional and financial implications in addition to health issues. The current treatment for chronic wounds involves the repeated use of bandages and drugs such as antibiotics over an extended period. A cost-effective and convenient solution for wound healing is the development of drug-incorporated bandages.

Boosting the photodynamic activity of erythrosine B by using thermoresponsive and adhesive systems containing cellulose derivatives for topical delivery.

Erythrosine displays potential photodynamic activity against microorganisms and unhealthy cells. However, erythrosine has high hydrophilicity, negatively impacting on permeation through biological membranes. Combining biological macromolecules and thermoresponsive polymers may overcome these erythrosine-related issues, enhancing retention of topically applied drugs.

In situ gelling drug delivery systems for topical drug delivery.

In situ gelling formulations are drug delivery systems which typically exist in a liquid form at room temperature and change into gel state after application to the body in response to various stimuli such as changes in temperature, pH and ionic composition. Their biomedical application can further be improved by incorporating drug nanoparticles into in situ gelling systems in order to prolong drug release, reduce dosing frequency and improve therapeutic outcomes of patients, developing highly functional but challenging dosage forms. The composition of in situ gelling formulations influence factors relating to performance such as their syringeability, rheology, drug release profile and drug bioavailability at target sites, amongst other factors.

Mitochondrial Targeting and Imaging with Small Organic Conjugated Fluorophores: A Review.

The last decade has seen an increasingly large number of studies reporting on the development of novel small organic conjugated systems for mitochondrial imaging exploiting optical signal transduction pathways. Mitochondria are known to play a critical role in a number of key biological processes, including cellular metabolism. Importantly, irregularities on their working function are nowadays understood to be intimately linked to a range of clinical conditions, highlighting the importance of targeting mitochondria for therapeutic benefits.

Polymer Architecture Effects on Poly(N,N-Diethyl Acrylamide)-b-Poly(Ethylene Glycol)-b-Poly(N,N-Diethyl Acrylamide) Thermoreversible Gels and Their Evaluation as a Healthcare Material.

Thermoreversible gels which transition between liquid-like and solid-like states when warmed have enabled significant novel healthcare technologies. Poly(N,N-diethyl acrylamide) (PDEA) is a thermoresponsive polymer which can be used as a trigger to form thermoreversible gels, however its use in these materials is limited and crucial design principles are unknown. Herein ABA copolymers with the structure PDEA-b-poly(ethylene glycol) (PEG)-b-PDEA are synthesized to give four block copolymers with varied molecular weight of PDEA and PEG blocks.

The effect of erythrosine-B on the structuration of poloxamer 407 and cellulose derivative blends: In silico modelling supporting experimental studies.

Erythrosine is a dye approved for medical use that has shown promising photodynamic activity, allowing for the inactivation of microorganisms and activity against malignant cells. Despite the great photodynamic potential, erythrosine exhibits hydrophilicity, negatively impacting its action in biological membranes. Therefore, the incorporation of erythrosine in micellar polymeric systems, such as poloxamers, may overcome this limitation.

The eggshell membrane: A potential biomaterial for corneal wound healing.

The eggshell membrane (ESM) is an abundant resource with innate complex structure and composition provided by nature. With at least 60 million tonnes of hen eggs produced globally per annum, utilisation of this waste resource is highly attractive in positively impacting sustainability worldwide. Given the morphology and mechanical properties of this membrane, it has great potential as a biomaterials for wound dressing.

Understanding the temperature induced aggregation of silica nanoparticles decorated with temperature-responsive polymers: Can a small step in the chemical structure make a giant leap for a phase transition?

Temperature-responsive nanomaterials have gained increasing interest over the past decade due their ability to undergo conformational changes in situ, in response to a change in temperature. One class of temperature-responsive polymers are those with lower critical solution temperature, which phase separate in aqueous solution above a critical temperature. When these temperature-responsive polymers are grafted to a solid nanoparticle, a change in their surface properties occurs above this critical temperature, from hydrophilic to more hydrophobic, giving them a propensity to aggregate.

Interaction between mucoadhesive cellulose derivatives and Pluronic F127: Investigation on the micelle structure and mucoadhesive performance.

Systems composed of bioadhesive and thermoresponsive polymers can combine in situ gelation with bio/mucoadhesion, enhancing retention of topically applied drugs. The effect of bioadhesive sodium carboxymethylcellulose (NaCMC) and hydroxypropyl methylcellulose cellulose (HPMC) on the properties of thermoresponsive Pluronic® F127 (F127) was explored, including micellization and the mucoadhesion. A computational analysis between these polymers and their molecular interactions were also studied, rationalising the design of improved binary polymeric systems for pharmaceutical and biomedical applications.

Thermoresponsive systems composed of poloxamer 407 and HPMC or NaCMC: mechanical, rheological and sol-gel transition analysis.

Poloxamer 407 (polox407) is widely studied as thermogelling polymer, transitioning to a gel state when warmed Polox407 forms weak hydrogels with rapid dissolution in excess solvent. This study reports the development of binary systems composed of polox407 and hydroxypropyl methylcellulose (HPMC) or sodium carboxymethylcellulose (NaCMC) aiming to improve the rheological and mechanical properties of the hydrogel. The interaction between polox407 and cellulose derivatives was studied, and their interaction with biological surfaces predicted.

The Swallowing Characteristics of Thickeners, Jellies and Yoghurt Observed Using an In Vitro Model.

Drinks and foods may be thickened to improve swallowing safety for dysphagia patients, but the resultant consistencies are not always palatable. Characterising alternative appetising foods is an important task. The study aims to characterise the in vitro swallowing behaviour of specifically formulated thickened dysphagia fluids containing xanthan gum and/or starch with standard jellies and yoghurt using a validated mechanical model, the "Cambridge Throat".

Assessing Mucoadhesion in Polymer Gels: The Effect of Method Type and Instrument Variables.

The process of mucoadhesion has been widely studied using a wide variety of methods, which are influenced by instrumental variables and experiment design, making the comparison between the results of different studies difficult. The aim of this work was to standardize the conditions of the detachment test and the rheological methods of mucoadhesion assessment for semisolids, and introduce a texture profile analysis (TPA) method. A factorial design was developed to suggest standard conditions for performing the detachment force method.

Diffusion through the ex vivo vitreal body - Bovine, porcine, and ovine models are poor surrogates for the human vitreous.

The human vitreous humour is a complex gel structure whose composition and physical properties can vary considerably from person to person and also change with age. To date, the viscoelastic properties of the human vitreous gel has not been thoroughly investigated and despite many years of intensive research, an ideal vitreous substitute remains a challenge. Understanding the physical structure and properties of the vitreous is of fundamental and therapeutic interest, providing a clear insight into diffusion and transport of administered ophthalmic drug molecules into the vitreous.

Polymeric gels for intravaginal drug delivery.

Intravaginal drug delivery can elicit a local effect, or deliver drugs systemically without hepatic first pass metabolism. There are a number of emerging areas in intravaginal drug delivery, but the vagina is a challenging route of administration, due to the clearance mechanisms present which result in poor retention of dosage forms, and the potential for irritation and other adverse reactions. Gel formulations are desirable due to the ease of application, spreading and that they cause little to no discomfort to the patient.

Development of an immobilization system for in situ micronutrients release.

An immobilization system constituted by coated microcapsules was developed aiming at immobilizing probiotic bacteria capable of producing folate and release it in a sustained manner into the intestine. Despite no probiotic folate-producers have been immobilized so far, the system has been developed with this goal and this work reports its stability and ability to release folate under gastro-intestinal conditions. Microcapsules were made of alginate with three consecutive coatings of poly-l-lysine, sodium alginate and chitosan.

Influence of surface geometry on the culture of human cell lines: A comparative study using flat, round-bottom and v-shaped 96 well plates.

In vitro cell based models have been invaluable tools for studying cell behaviour and for investigating drug disposition, toxicity and potential adverse effects of administered drugs. Within this drug discovery pipeline, the ability to assess and prioritise candidate compounds as soon as possible offers a distinct advantage. However, the ability to apply this approach to a cell culture study is limited by the need to provide an accurate, in vitro-like, microenvironment in conjunction with a low cost and high-throughput screening (HTS) methodology.

A mucosa-mimetic material for the mucoadhesion testing of thermogelling semi-solids.

Mucosa-mimetic materials are synthetic substrates which aim to replace animal tissue in mucoadhesion experiments. One potential mucosa-mimetic material is a hydrogel comprised of N-acryloyl-d-glucosamine and 2-hydroxyethylmethacrylate, which has been investigated as a surrogate for animal mucosae in the mucoadhesion testing of tablets and solution formulations. This study aims to investigate the efficacy of this mucosa-mimetic material in the testing of thermogelling semi-solid formulations, which transition from solution to gel upon warming.

Internal Nanoparticle Structure of Temperature-Responsive Self-Assembled PNIPAM-b-PEG-b-PNIPAM Triblock Copolymers in Aqueous Solutions: NMR, SANS, and Light Scattering Studies.

In this study, we report detailed information on the internal structure of PNIPAM-b-PEG-b-PNIPAM nanoparticles formed from self-assembly in aqueous solutions upon increase in temperature. NMR spectroscopy, light scattering, and small-angle neutron scattering (SANS) were used to monitor different stages of nanoparticle formation as a function of temperature, providing insight into the fundamental processes involved. The presence of PEG in a copolymer structure significantly affects the formation of nanoparticles, making their transition to occur over a broader temperature range.

In Vitro Cell Models for Ophthalmic Drug Development Applications.

Tissue engineering is a rapidly expanding field that aims to establish feasible techniques to fabricate biologically equivalent replacements for diseased and damaged tissues/organs. Emerging from this prospect is the development of in vitro representations of organs for drug toxicity assessment. Due to the ever-increasing interest in ocular drug delivery as a route for administration as well as the rise of new ophthalmic therapeutics, there is a demand for physiologically accurate in vitro models of the eye to assess drug delivery and safety of new ocular medicines.

Mucoadhesion and mucosa-mimetic materials--A mini-review.

Mucoadhesion describes an attractive interaction between dosage form and mucosal membrane. The evaluation of mucoadhesive excipients often requires the use of ex vivo mucosal tissues taken from laboratory animals. These can be difficult to source, highly heterogeneous, and require the use of animal products.