Optimization of Cl and heavy metal removal during heat treatment of municipal solid waste incineration fly ash and municipal sludge after co-washing.

Heat treatment, known for its detoxification and volume reduction characteristics, is a promising technology for the management of municipal solid waste incineration fly ash (MFA) and municipal sludge (MS). This paper uses the solid residue from MFA and MS after co-washing as the raw material to study the melting properties, phase transformations, changes in Cl content, heavy metal removal efficiency, and leaching toxicity. The results indicated that co-processing of MFA and MS can effectively reduce the melting temperature.

Improving the Mechanical Properties and Microstructure of 12 mol% Ceria-Stabilized Tetragonal Zirconia Polycrystal Ceramics with Low-Content NdO.

In this study, 12 mol% ceria-stabilized tetragonal zirconia polycrystal ceramics with xNdO (where x equals 0, 0.1, 0.2, 0.

Seawater Mixed with One Part Alkali Activated Material: An Environmental and Cost Evaluation.

Concrete production is associated with extensive energy consumption and significant CO emissions. In addition, tremendous amounts of freshwater are used as a mixing agent. Urgency is increasing to develop sustainable cementitious materials and promote freshwater-saving strategies.

Oily cold rolling mill sludge conditioned by quicklime to improve dewatering performance: optimization and mechanism study.

Dewatering is critical to oily cold rolling mill (CRM) sludge treatment. Therefore, finding an efficient, energy-saving, and applicable dewatering technology for oily CRM sludge is still urgent. This study investigated the performance of quicklime as a conditioning agent for oily CRM sludge conditioning and dewatering.

Co-treatment of municipal solid waste incineration fly ash (MSWI FA) and municipal sludge: A innovative method to improve sludge dewatering with fly ash dechlorination.

The complexity of municipal sludge dewatering is a bottleneck problem limiting resource utilization. In this paper, adding municipal solid waste incineration fly ash (MSWI FA) to municipal sludge for enhanced dewatering was applied, while the chlorine salt in MSWI FA was simultaneously removed using water in municipal sludge. The effects of different dosages and chemical components of MSWI FA on municipal sludge dewatering, and the removal effect of municipal sludge washing on Cl element were investigated.

Basic Research on Co-treatment of Municipal Solid Waste Incineration Fly Ash and Municipal Sludge for Energy-Saving Melting.

MSWI fly ash and municipal sludge are solid wastes. Melting vitrification treatment was a resource utilization method. However, the flow temperature of grate furnace MSWI fly ash and municipal sludge was high (>1325 °C), which increased the energy consumption in the melting process.

Enhancing the Dewaterability of Oily Cold Rolling Mill Sludge Using Quicklime as a Conditioning Agent.

The high moisture and viscosity characteristics of oily cold rolling mill (CRM) sludge led to limitations in its recycling. In this paper, the results of using quicklime as a conditioning agent to improve the dewaterability of the oily CRM sludge cake were reported. Quicklime was selected as the best conditioning agent through conditioning-dewatering experiments because it could effectively reduce the viscosity of oily CRM sludge and improve the dewaterability of the oil sludge filter cake.

Dioxins control as co-processing water-washed municipal solid waste incineration fly ash in iron ore sintering process.

Co-processing water-washed municipal solid waste incineration fly ash (WM-FA) in iron ore sintering process is of great prospect. In this paper, the emission characteristics of dioxins during sintering process combined with WM-FA were studied, and the control method for dioxins was proposed. The results showed that adding WM-FA in the form of pellets with diameter 5-8 mm slightly influenced sinter quality.