Challenges and opportunities in the application of carbon nanotubes as membrane channels to improve mass transfer to cells.

The regulation and improvement of mass transfer through the living cell's membrane is of great importance in various industrial, environmental and medical applications. Designing membrane channels based on carbon nanotubes (CNTs) has been considered as a promising approach to this end because of the geometry of CNTs, their physical properties, high chemical stability, and excellent transport features. Despite their advantages, CNTs have a few problems such as their toxicity to living cells, low bioavailability in an aqueous medium and difficulties with managing their orientation within the cell membrane which should be addressed in the first place.

Application of aqueous biphasic systems based on pluronic copolymer and deep eutectic solvent to achieve purified C phycocyanin.

The idea of isolating C-phycocyanin from Spirulina platensis microalgae to be used as a valuable protein has a long history, so that today, with the advancement of science and application of various technologies, the isolation of this protein occurred by one of the most important processes. C-phycocyanin has multiple applications in pharmaceutical, cosmetic and food industries as an additive and natural dye. In this research, the aqueous two-phase system (ATPS) based on block copolymers and deep eutectic solvents (DES) was used for C-phycocyanin purification and their phase behavior was evaluated.

Separation of heavy metals using aqueous two-phase systems based on choline chloride/urea and betaine/urea deep eutectic solvents.

The heavy metals in the effluents of industries threatens the human health. In this research, aqueous two-phase systems based on two deep eutectic solvents, choline chloride/urea and betaine/urea, along with dipotassium hydrogen phosphate, were used as environmentally friendly systems to extract hexavalent chromium. Binodal curves and tie lines were obtained for two systems.

Recent advances in drug delivery applications of aqueous two-phase systems.

Aqueous two-phase systems (ATPSs) are liquid-liquid equilibria between two aqueous phases that usually contain over 70% water content each, which results in a nontoxic organic solvent-free environment for biological compounds and biomolecules. ATPSs have attracted significant interest in applications for formulating carriers (microparticles, nanoparticles, hydrogels, and polymersomes) which can be prepared using the spontaneous phase separation of ATPSs as a driving force, and loaded with a wide range of bioactive materials, including small molecule drugs, proteins, and cells, for delivery applications. This review provides a detailed analysis of various ATPSs, including strategies employed for particle formation, polymerization of droplets in ATPSs, phase-guided block copolymer assemblies, and stimulus-responsive carriers.

Extraction and separation of astaxanthin with the help of pre-treatment of Haematococcus pluvialis microalgae biomass using aqueous two-phase systems based on deep eutectic solvents.

The microalgae Haematococcus pluvialis are the main source of the natural antioxidant astaxanthin. However, the effective extraction of astaxanthin from these microalgae remains a significant challenge due to the rigid, non-hydrolyzable cell walls. Energy savings and high-efficiency cell disruption are essential steps in the recovery of the antioxidant astaxanthin from the cysts of H.

Carbon-Based Nanostructures as Emerging Materials for Gene Delivery Applications.

Gene therapeutics are promising for treating diseases at the genetic level, with some already validated for clinical use. Recently, nanostructures have emerged for the targeted delivery of genetic material. Nanomaterials, exhibiting advantageous properties such as a high surface-to-volume ratio, biocompatibility, facile functionalization, substantial loading capacity, and tunable physicochemical characteristics, are recognized as non-viral vectors in gene therapy applications.

A comparative study of deep eutectic solvents based on fatty acids and the effect of water on their intermolecular interactions.

In this work, intermolecular interactions among the species of fatty acids-based DESs with different hydrogen bond acceptors (HBA) in the adjacent water have been investigated using molecular dynamics (MD) simulation. The results of this work provide deep insights into understanding the water stability of the DESs based on thymol and the eutectic mixtures of choline chloride and fatty acids at a temperature of 353.15 K and atmospheric pressure.

Rheological and thermal properties of an enteral nutrition formula for nutritional support patients using a combined mixture of gelatin and maltodextrin.

Enteral nutrition is a type of nutritional support that provides the necessary sources of energy and protein for patients who suffer from dysphagia, chronic disease, and loss of appetite. In this study, a gelatin-maltodextrin binary biopolymer system has been incorporated into a semi-solid formula. The I-optimal combination design approach was used to create 19 formulations, and the dynamic rheological properties, dynamic laser scattering, and zeta potential responses were evaluated over 30 days of storage at 5°C.

Pathogenic CANVAS-causing but not nonpathogenic RFC1 DNA/RNA repeat motifs form quadruplex or triplex structures.

Biallelic expansions of various tandem repeat sequence motifs are possible in RFC1 (replication factor C subunit 1), encoding the DNA replication/repair protein RFC1, yet only certain repeat motifs cause cerebellar ataxia, neuropathy, and vestibular areflexia syndrome (CANVAS). CANVAS presents enigmatic puzzles: The pathogenic path for CANVAS neither is known nor is it understood why some, but not all expanded, motifs are pathogenic. The most common pathogenic repeat is (AAGGG)n•(CCCTT)n, whereas (AAAAG)n•(CTTTT)n is the most common nonpathogenic motif.

Effect of water addition on caprylic acid: Quaternary ammonium salts (QAS) deep eutectic solvents: Characterization of their structural and dynamical properties.

Physicochemical properties of the binary mixtures based on Caprylic acid: Quaternary ammonium salts (QAS) (7:3 mol ratio) are investigated using MD simulations. Considering the hydrophobic character of eutectic solvents based on long-chain fatty acids, the stability of the binary mixtures was investigated in the adjacent water. In order to investigate the effect of water on intermolecular interactions in binary mixtures, the structural properties of the binary mixtures in the pure state and adjacent to water were investigated at 310 K.

Assessment of the properties of natural-based chiral deep eutectic solvents for chiral drug separation: insights from molecular dynamics simulation.

The structural and physicochemical properties of chiral deep eutectic solvents (DESs) consisting of racemic mixtures of menthol and acetic acid (DES1), racemic mixtures of menthol and lauric acid (DES2), and racemic mixtures of menthol and pyruvic acid (DES3) for enantioselective extraction processes are investigated. Structural results, such as the radial distribution function (RDF) and the combined distribution function (CDF), indicate that the hydroxyl hydrogen of menthol has a dominant interaction with the carbonyl oxygen of the acids in the considered DESs. The number of hydrogen bonds and non-bonded interaction energies formed between -menthol and HBDs are larger than those with -menthol, resulting in the self-diffusion coefficient of -menthol being larger than that of -menthol.

Investigation the effect of water addition on intermolecular interactions of fatty acids-based deep eutectic solvents by molecular dynamics simulations.

In this work, we focused on the interaction between hydrogen bond acceptor (HBA) and hydrogen bond doner (HBD) in the binary mixtures. The results showed that Cl anion plays a key role in the formation of DESs. Also, the structural stability of deep eutectic solvents based on fatty acids (FAs) and choline chloride (ChCl) at different ratios was investigated in water using molecular dynamics simulations.

A novel strategy for process optimization of a natural gas liquid recovery unit by replacing Joule-Thomson valve with supersonic separator.

The natural gas liquid recovery is an important process in a gas plant to correct hydrocarbon dew point and earn profit. In this study, a natural gas liquid recovery unit operated based on the Joule-Thomson process was investigated and its performance was optimized. To improve the system performance, the plant configuration and intermediate pressure ratio were defined as the variables and maximization of the natural gas liquid recovery rate and maximization of exergy efficiency were defined as the objective functions.

Preparation, characterization and in-vivo efficacy study of glatiramer acetate (GA)-hydrogel-microparticles as novel drug delivery system for GA in RRMS.

Relapsing Remitting Multiple Sclerosis is a chronic Central nervous system autoimmune disease. There is no absolute treatment for MS and the available remedies are called disease modifying therapies (DMTs). Glatiramer acetate (GA) is one of the FDA approved DMTs.

Design of double functionalized carbon nanotube for amphotericin B and genetic material delivery.

In the present work, single wall carbon nanotubes (SWCNT) were successively functionalized with phospholipid DSPE-PEG carboxylic acid, and then, with ethylenediamine (EDA), to obtain double functionalized single wall carbon nanotube (DFSWCNT). Then, DFSWCNT was applied as a carrier for delivering amphotericin B (Amb) and EGFP plasmid. FSWCNT's concentration obtained via UV-visible analysis was 0.

Investigation of novel passive methods of generation of swirl flow in supersonic separators by the computational fluid dynamics modeling.

In this paper, three passive methods for the generation of swirl flow in the supersonic separator (3S) were investigated, and their structures were optimized by computational fluid dynamics (CFD) modeling. The influence of the structural and operational parameters on the dew point depression, phase envelope diagram, rate of natural gas liquid (NGL) recovery, and separation efficiency have also been evaluated. The collection efficiency was significantly improved for the nozzle equipped with the passive swirler compared with the simple nozzle.

Stimuli-Responsive Miktoarm Polymer-Based Formulations for Fisetin Delivery and Regulatory Effects in Hyperactive Human Microglia.

Branched star polymers offer exciting opportunities in enhancing the efficacy of nanocarriers in delivering biologically active lipophilic agents. It is demonstrated that the star polymeric architecture can be leveraged to yield soft nanoparticles of vesicular morphology with precisely located stimuli-sensitive chemical entities. Amphiphilic stars of AB (A = PEG, B = PCL) composition with/without oxidative stress or reduction responsive units at the core junction of A and B arms, are constructed using synthetic articulation.

In Vitro Evaluation of DSPE-PEG (5000) Amine SWCNT Toxicity and Efficacy as a Novel Nanovector Candidate in Photothermal Therapy by Response Surface Methodology (RSM).

Nowadays, finding a novel, effective, biocompatible, and minimally invasive cancer treatment is of great importance. One of the most promising research fields is the development of biocompatible photothermal nanocarriers. PTT (photothermal therapy) with an NIR (near-infrared) wavelength range (700-2000 nm) would cause cell death by increasing intercellular and intracellular temperature.

A novel strategy for comprehensive optimization of structural and operational parameters in a supersonic separator using computational fluid dynamics modeling.

In this study, the effects of several structural and operational parameters affecting the separation efficiency of supersonic separators were investigated by numerical methods. Different turbulence models were used and their accuracies were evaluated. Based on the error analysis, the V2-f turbulence model was more accurate for describing the high swirling turbulent flow than other investigated turbulence models.

A predictive PC-SAFT EOS based on COSMO for pharmaceutical compounds.

The present study was conducted to develop a predictive type of PC-SAFT EOS by incorporating the COSMO computations. With the proposed model, the physical adjustable inputs to PC-SAFT EOS were determined from the suggested correlations with dependency to COSMO computation results. Afterwards, we tested the reliability of the proposed predictive PC-SAFT EOS by modeling the solubility data of certain pharmaceutical compounds in pure and mixed solvents and their octanol/water partition coefficients.

Separation of phenyl acetic acid and 6-aminopenicillanic acid applying aqueous two-phase systems based on copolymers and salts.

6-Aminopenicillanic acid (6-APA) is used for synthesis of semisynthetic antibiotics. Polymer-salt aqueous two-phase systems (ATPSs) were applied for separation of 6-APA and phenyl acetic acid (PAA), as the products of hydrolyzation reaction of Penicillin G/Penicillin V. The binodal curves of ATPS composed of a copolymer (reverse Pluronic 10R5, Pluronic L35 and PEG-ran-PPG) and a salt (Tri-sodium citrate, tri-potassium citrate, di-potassium phosphate, sodium sulphate and magnesium sulphate) were obtained.

Application of PC-SAFT EOS for Pharmaceuticals: Solubility, Co-Crystal, and Thermodynamic Modeling.

In this study, the applicability of the perturbed chain statistical associating fluid theory (PC-SAFT) was evaluated for pharmaceutical compounds. For this purpose, the parameters of the PC-SAFT equation of state (EOS) were regressed by applying the experimental solubility data of 54 pharmaceuticals in pure solvents. The reported errors for train and test data show the suitability of the PC-SAFT EOS.

Investigation of COSMO-SAC model for solubility and cocrystal formation of pharmaceutical compounds.

In this study, a predictive model named COSMO-SAC was investigated in solid/liquid equilibria for pharmaceutical compounds. The examined properties were the solubility of drug in the pure and mixed solvents, octanol/water partition coefficient, and cocrystal formation. The results of the original COSMO-SAC model (COSMO-SAC (2002)) was compared with a semi-predictive model named Flory-Huggins model and a revised version of the COSMO-SAC (COSMO-SAC (2010)).

Thermophysical and rheological properties of sorbitol + ([mmim](MeO)PO) ionic liquid solutions: Solubility, density and viscosity.

In this study, the solubility, density and viscosity of sorbitol as a sugar alcohol in the ([mmim](MeO)PO) ionic liquid (IL) were measured. The results indicated that sorbitol is highly soluble in this IL. The Flory-Huggins model with an average value for the χ parameter was successfully applied to predict the solubility of sorbitol in IL.

A Novel Approach in Sorting Chirality Species of Single-Wall Carbon Nanotubes Based on an Aqueous Two-Phase System of Polymer-Salt.

Sorting of distinct (n, m) chirality species of single-wall carbon nanotubes (SWCNTs) is essential for progress in technical applications in the field of electronic and optic devices. The purpose of this study is to investigate the isolation of single-wall carbon nanotubes based on diameters/chirality in a polymer-salt (polyethylene glycol and sodium citrate) aqueous two-phase system (ATPS) a substitute for common polymer-polymer (polyethylene glycol and dextran) system. The ATPS based on polymer-salt used instead of the common polymer-polymer system due to low viscosity, reduced surface tension, and lower cost of sodium citrate compared to the dextran.