State of the Art in Thermal Catalytic Upgrading of Biomass and Biomass-Derived Intermediates.

Biomass-derived energy sources represent a promising domestic route for fuel and chemical production, taking advantage of largely underutilized biological and waste resources. Heterogeneous catalysis plays a key role in these biomass conversion processes, as reflected by all American Society for Testing and Materials-approved pathways for producing sustainable aviation fuel proceeding through a catalytic step. This concise review seeks to establish the state of the art in thermal catalytic process development for various biomass-derived feedstocks and the current enabling capabilities that aid this development.

Synthesis of Acetone-Derived C , C , and C Carbon Scaffolds for Chemical and Fuel Applications.

A simple, inexpensive catalyst system (Amberlyst 15 and Ni/SiO -Al O ) is described for the upgrading of acetone to a range of chemicals and potential fuels. Stepwise hydrodeoxygenation of the produced ketones can yield branched alcohols, alkenes, and alkanes. An analysis of these products is provided, which demonstrates that this approach can provide a product profile of valuable bioproducts and potential biofuels.

The Conversion of Starch and Sugars into Branched C10 and C11 Hydrocarbons.

Oligosaccharides, such as starch, cellulose, and hemicelluloses, are abundant and easily obtainable bio-derived materials that can potentially be used as precursors for fuels and chemical feedstocks. To access the pertinent molecular building blocks (i.e.

The Effect of Functional Groups in Bio-Derived Fuel Candidates.

Interest in developing renewable fuels is continuing to grow and biomass represents a viable source of renewable carbon with which to replace fossil-based components in transportation fuels. During our own work, we noticed that chemists think in terms of functional groups whereas fuel engineers think in terms of physical fuel properties. In this Concept article, we discuss the effect of carbon and oxygen functional groups on potential fuel properties.

Oxidation and hydration of U3O8 materials following controlled exposure to temperature and humidity.

Chemical signatures correlated with uranium oxide processing are of interest to forensic science for inferring sample provenance. Identification of temporal changes in chemical structures of process uranium materials as a function of controlled temperatures and relative humidities may provide additional information regarding sample history. In this study, a high-purity α-U3O8 sample and three other uranium oxide samples synthesized from reaction routes used in nuclear conversion processes were stored under controlled conditions over 2-3.

The hydrodeoxygenation of bioderived furans into alkanes.

The conversion of biomass into fuels and chemical feedstocks is one part of a drive to reduce the world's dependence on crude oil. For transportation fuels in particular, wholesale replacement of a fuel is logistically problematic, not least because of the infrastructure that is already in place. Here, we describe the catalytic defunctionalization of a series of biomass-derived molecules to provide linear alkanes suitable for use as transportation fuels.

Regeneration of ammonia borane spent fuel by direct reaction with hydrazine and liquid ammonia.

Ammonia borane (H(3)N-BH(3), AB) is a lightweight material containing a high density of hydrogen (H(2)) that can be readily liberated for use in fuel cell-powered applications. However, in the absence of a straightforward, efficient method for regenerating AB from dehydrogenated polymeric spent fuel, its full potential as a viable H(2) storage material will not be realized. We demonstrate that the spent fuel type derived from the removal of greater than two equivalents of H(2) per molecule of AB (i.

Synthesis and thermolytic behavior of tin(IV) formates: in search of recyclable metal-hydride systems.

The synthesis and characterization of the series of organotin formates together with their thermolytic behavior are described. The diformate Bu(n)(2)Sn{OC(O)H}(2) (1) was synthesized by the reaction of Bu(n)(2)SnH(2) with formic acid. The triorganotin monoformate compounds R(3)SnOC(O)H (R = Cy (cyclohexyl)) 3, Mes, (mesityl, 2,4,6-trimethylphenyl) 4, and Dmp (2,6-dimethylphenyl 5) were obtained by the reaction of R(3)SnOH with formic acid.

Recycle of tin thiolate compounds relevant to ammonia-borane regeneration.

The use of benzenedithiol as a digestant for ammonia-borane spent fuel has been shown to result in tin thiolate compounds which we demonstrate can be recycled, yielding Bu(3)SnH and ortho-benzenedithiol for reintroduction to the ammonia-borane regeneration scheme.

Aerobic oxidation of pinacol by vanadium(V) dipicolinate complexes: evidence for reduction to vanadium(III).

The reactivity of vanadium complexes bearing the ligand dipicolinic acid (H(2)dipic) with alcohols has been explored. Dipic vanadium complexes are able to catalyze the aerobic oxidative C-C bond cleavage of pinacol. Reaction under anaerobic conditions allowed for isolation of a V(III) mu-oxo dimer, supporting the involvement of V(III) in aerobic oxidation reactions.

Substituent effects in formally quintuple-bonded ArCrCrAr compounds (Ar = terphenyl) and related species.

The effects of different terphenyl ligand substituents on the quintuple Cr-Cr bonding in arylchromium(I) dimers stabilized by bulky terphenyl ligands (Ar) were investigated. A series of complexes, ArCrCrAr (1-4; Ar = C6H2-2,6-(C6H3-2,6-iPr2)2-4-X, where X = H, SiMe3, OMe, and F), was synthesized and structurally characterized. Their X-ray crystal structures display similar trans-bent C(ipso)CrCrC(ipso) cores with short Cr-Cr distances that range from 1.

Synthesis and reactivity of metal complexes supported by the tetradentate monoanionic ligand bis(2-picolyl)(2-hydroxy-3,5-di-tert-butylbenzyl)amide (BPPA).

Metal-halide complexes of Ti, V, Y, Zr, Al, Ga, and U supported by the tetradentate monoanionic (TDMA) ligand bis(2-picolyl)(2-hydroxy-3,5-di-tert-butylbenzyl)amine, H(BPPA), were synthesized and spectroscopically characterized. In addition, the complexes (BPPA)TiCl2, (BPPA)VBr2, [(BPPA)YCl2]2, (BPPA)AlCl2, (BPPA)GaCl2, and (BPPA)UI3 were characterized by single-crystal X-ray crystallography. In all cases the ligand is bound kappa4 to the metal center.

Synthesis and characterization of low-coordinate divalent aryl transition-metal halide analogues of grignard reagents: precursors for reduction to metal-metal-bonded complexes.

The synthesis and characterization of the series of divalent first-row aryl transition-metal(II) halide compounds [Cr(mu-Cl)Ar']2 (1) and (Li(OEt2)Ar'MI2]2 (M=Mn (2), Fe (3), and Co (4); Ar'=C6H3-2,6-(C6H3-2,6-iPr2)2) are described. 1-4 were prepared by the addition of one equiv of Ar'Li to the respective transition-metal dihalides. They were characterized by UV-vis spectroscopy, magnetic measurements, and by X-ray crystallography.

The coordination of perrhenate and pertechnetate to thorium(IV) in the presence of phosphine oxide or phosphate ligands.

A series of thorium(IV) perrhenato- and pertechnetato-complexes with P[double bond, length as m-dash]O donor ligands have been prepared and characterised both in the solid state and in solution. Isostructural complexes of general formula [Th(MO(4))(4)(L)(4)], where M = Re or Tc and L = triethylphosphate (TEP) (2 and 7), tri-iso-butylphosphate (TiBP) (3 and 8) and tri-n-butylphosphine oxide (TBPO) (4 and 9) have been prepared from the novel starting materials [Th(ReO(4))(4)] x 4H(2)O (1) and [Th(TcO(4))(4)] x 4H(2)O (6). The reaction of or with triphenylphosphine oxide (TPPO) in MeOH has also led to the synthesis of [Th(MO(4))(3)(TPPO)(3)(OCH(3))(HOCH(3))] (M = Re (5) or Tc (10)).

Temperature-resolved study of three [M(M'O4)4(TBPO)4] complexes (MM' = URe, ThRe, ThTc).

The crystal structures of the title complexes were measured at several temperatures between room temperature and 100 K. Each sample shows reversible crystal-to-crystal phase transitions as the temperature is varied. The behaviour of [U(ReO4)4(TBPO)4] (I) and [Th(ReO4)4(TBPO)4] (II) (TBPO = tri-n-butylphosphine oxide) is very similar; at room temperature, crystals of (I) and (II) are isostructural, with space group I42m, and reducing the temperature to 100 K causes a lowering of the space-group symmetry to C-centred cells, space groups Cc for (I) and Cmc2(1) for (II).

The synthesis, structural, and spectroscopic characterization of uranium(IV) perrhenate complexes.

We report the synthesis, structural, and spectroscopic characterization of a series of uranium(IV)-perrhenato complexes. Three isostructural complexes with general formula [U(ReO4)4(L)4] (where L = tri-n-butylphosphine oxide/TBPO (2), triethyl phosphate/TEP (3), or tri-iso-butyl phosphate/TiBP (4)), have been synthesized, both through the photoreduction of ethanolic {UO2}2+ solutions and also via a novel U(IV) starting material, U(ReO4)4.5H2O (1).

Synthesis of a stable compound with fivefold bonding between two chromium(I) centers.

Although in principle transition metals can form bonds with six shared electron pairs, only quadruply bonded compounds can be isolated as stable species at room temperature. Here we show that the reduction of {Cr(mu-Cl)Ar'}2 [where Ar' indicates C6H3-2,6(C6H3-2,6-Pri2)2 and Pr indicates isopropyl] with a slight excess of potassium graphite has produced a stable compound with fivefold chromium-chromium (Cr-Cr) bonding. The very air- and moisture-sensitive dark red crystals of Ar'CrCrAr' were isolated with greater than 40% yield.

Coordination of pertechnetate [TcO4]- to actinides.

The ability of [TcO(4)](-) to coordinate directly to tetra- and hexa-valent actinides in the presence of organic P[double bond, length as m-dash]O ligands is confirmed in the crystallographically characterised complexes [UO(2)(TcO(4))(2)(Ph(3)PO)(3)] and [Th(TcO(4))(4)((n)Bu(3)PO)(4)].

Spectroscopic evidence for the direct coordination of the pertechnetate anion to the uranyl cation in [UO2(TcO4)(DPPMO2)2]+.

We report the synthesis and structural characterization of [UO(2)(ReO(4))(DPPMO(2))(2)][ReO(4)] and [UO(2)(Cl)(DPPMO(2))(2)][Cl] (where DPPMO(2) = bis(diphenylphosphino)methane dioxide). In both complexes, the linear uranyl dication is coordinated to two bidentate DPPMO(2) ligands in the equatorial plane with one coordinated and one non-coordinated anion (either perrhenate or chloride). We have also prepared the pertechnetate analogue, and, through (31)P and (99)Tc NMR, we have shown that the cation, [UO(2)(TcO(4))(DPPMO(2))(2)](+), is stable in solution.

Raman spectroscopy of silver pertechnetate.

The title compound, AgTcO4, contains close Ag-O contacts, and Raman spectroscopy shows a reduction in the Tc-O stretching frequencies on changing the pertechnetate counter-cation from K+ to Ag+.